L.S. Starrett

Rust resistantQuick readingDurable

An improved joint, designed so the tension can be adjustedThe legs are made from a high-grade steelTension does not change with opening and closing of legs

For combination squares, sets, and bevel protractors

Straight edges are precision ground and nicely finishedNot beveled or graduatedDesigned to be durable, with a sturdy, reliable thickness for long product lifeExcellent for drawing or scribing...

Made from cast iron with a satin nickel finish, all working surfaces are ground flat and trueThe level has two vials at right angles for cross test leveling without moving the tool and a plumb level...

Rust resistantQuick readingDurable

Measuring rods are solid and assembled on one side of the micrometer head Rods are insulated Hardened and ground anvils Quick-reading figures every thousandth numbered Each rod marked with length...

Multi-purpose uses include45‚° miter, depth gage, height gage, marking or scribing gage, a level, a plumb, and a precision ruleSteel scriberReversible lock bolt allows blade to be turned over or...

For holding taps, drills, reamers, and other small tools to be turned by handCentered body, for use on lathe centers or on upright drilling machines to start the tap straightJaws conform to the tool...

Special collet design with tapers at both ends, providing maximum clamping surfaceSmaller body diameter than the chuck which allows fast opening and closingSet of all four sizes in a protective case

Knife-edge base and a needle point contact which has been hardened and groundThe knife-edge base has a cutout so that the conical point can be precisely positioned for close workPoint is 1/2" (12.7...

Padded case that gives protection against scratches, damage, dirt and grimRigid construction

Rounded ends ¢¢¬¢‚¬Å“ no ragged edges make stock easier to work withEach piece marked with thickness and in individual envelopeWith convenient 3/16" (5 mm) hole punched in the end for hangingFor use...

Flat or round capacity

Ideal for heavy duty use and for gaining access to more measuring area than with conventional calipers Strong inside and outside nibs measuring from zero for outside measuring and from .300 in or 8...

Extremely handy for use in grinding and setting screw cutting toolsHas a table of double depths of threads for determining size of tap drillsMade of spring-tempered steel with satin chrome...

DISCONTINUED-NO SALE: Blades Only for combination squares, sets and bevel protractors

Will firmly hold square or round shanksPlunger operated by knurled sleeveSpring inside sleeve causes plunger to back off when pressure is removedRound shanks can be gripped, but care must be...

Straight leavesLeaves made of finest tempered-steel, carefully finished to correct thickness, individually tested and marked with thicknessLocking device on most gagesLeaves easily removed or...

Rounded nose scriber cuts clean, sharp linesZero at any positionManual ON/OFF w/auto OFF after 5 min. of non-useScriber can reference zero from the base bottomSlide lock & fine adjustment thumb roll

Steel, properly tempered and well finishedPoints are finely taperedHandle, as well as the points, have a knurled gripSeveral points are furnishedLong bent point is handy for reaching through holes

Pitch marked on leafNarrow design of leaves permits checking of internal threads and external threadsSteel case with folding leaves at both endsFor determining the pitch of various threads

Rounded ends ¢¢¬¢‚¬Å“ no ragged edges make stock easier to work withEach piece marked with thickness and in individual envelopeWith convenient 3/16" (5 mm) hole punched in the end for hangingFor use...

Straight edges are precision ground and nicely finishedNot beveled or graduatedDesigned to be durable, with a sturdy, reliable thickness for long product lifeExcellent for drawing or scribing...

Blades Only for combination squares, sets and bevel protractors

Rounded ends ¢¢¬¢‚¬Å“ no ragged edges make stock easier to work withEach piece marked with thickness and in individual envelopeWith convenient 3/16" (5 mm) hole punched in the end for hangingFor use...

Rounded ends ¢¢¬¢‚¬Å“ no ragged edges make stock easier to work withEach piece marked with thickness and in individual envelopeWith convenient 3/16" (5 mm) hole punched in the end for hangingFor use...

With 1/4" high speed steel pilot drillSet-screw in the body allows easy pilot drill replacement

Rust resistantQuick readingDurable

Combination set featuring square, center and reversible protractor head and bladeIncludes a reversible lock bolt, scriber and spirit level in both the square head and protractor headSatin chrome blade

Blades Only for combination squares, sets and bevel protractors

The tape line which has a tough-baked yellow enamel-coated line instead of a satin chrome finished lineThe well-designed case is made of steel covered with tough, durable red vinylThe long handle and...

Rounded ends ¢¢¬¢‚¬Å“ no ragged edges make stock easier to work withEach piece marked with thickness and in individual envelopeWith convenient 3/16" (5 mm) hole punched in the end for hangingFor use...

Level with all purpose, circular vial has full 360 degree viewingSturdy plastic constructionLarge sight for ease of readingPocket sizeFor leveling appliances, turntables etc. in the home or workshop

Regular Steel FinishQuick ReadingThickness and design permit shape retention and accuracy while portable and easy-to-handle

Well proportioned, hardened, properly tempered, and have a knurled grip for ease of handlingSpecial tempering makes head less likely to fracture from hard, off-center blow

Has approximately twice the holding power of our 657 Magnetic Base and has a rotary on/off switchPost snug with two 3/4 in (19mm) holes positions the dial indicator at any height, vertical angle and...

Fits 12"-24" blades

Saws have high-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on materials that are too hard and abrasive for regular steel hole sawsSaws have constant 3-pitch teeth

Easy-to-use adjusting screw requiring minimal turns to tension the blade up to 28,000 p.s.i. (2,000 kgs/cm2)High-tension prevents twisting and binding of the blade when bearing downMade of cast...