L.S. Starrett

Unparalleled cutting efficiency and the tough alloy steel back resists breakage when used under less than ideal conditionsThese blades will handle irregular shapes and interrupted cuts with ease

Legs are made from flat stockFulcrum stud is hardened and has a smooth bearing surfaceStrong, flexible bow springHigh-grade steel construction

Rust resistantQuick readingDurable

High quality precision steel rule is flat with permanent adhesive backCut to size with scissorsFor mounting on workbenches, saw tables, drafting tables, etc.

Legs are made from flat stockStrong, flexible bow springFulcrum stud is hardened and has a smooth bearing surfaceHigh-grade steel construction

Rounded ends ¢¢¬¢‚¬Å“ no ragged edges make stock easier to work withEach piece marked with thickness and in individual envelopeWith convenient 3/16" (5 mm) hole punched in the end for hangingFor use...

Hardened cutting edge with tough flexible backAll purpose blade

Steel scriberReversible lock bolt allows blade to be turned over or end-for-end, without removing the lock bolt or nutSpirit level in square and protractor headsSquare head with black wrinkle...

Legs are made from flat stockStrong, flexible bow springFulcrum stud is hardened and has a smooth bearing surfaceHigh-grade steel construction

Straight leavesLeaves made of finest tempered-steel, carefully finished to correct thickness, individually tested and marked with thicknessLocking device on most gagesLeaves easily removed or...

Rust resistantQuick readingDurable

Knurled chuck holds scriber firmlyScriber point is hardened and finely tapered so location of point is not obscuredKnurled and nickel plated steel handlePoint can be reversed, telescoped into handle...

Lock to hold the slide in positionZero at any positionFine adjustment thumb roll

Compact and VersatileThree adjustable pivots controlled by a single knob for fast, easy indicator positioning

Multi-purpose uses include: 45‚° miter, depth gage, height gage, marking or scribing gage, a level, a plumb, and a precision ruleHardened, machine divided graduations, bladeReversible lock bolt...

Reversible lock bolt allows blade to be turned over or end-for-end, without removing the lock bolt or nutMulti-purpose uses include45‚° miter, depth gage, height gage, marking or scribing gage, a...

Determines the true size of holes, slots, and recessesThe ends of both contacts are hardened and ground to a radius to allow proper clearance on the smallest hole the gage will enterOne telescoping...

Straight measuring surface for outside measurements, rounded nibs for inside or hole measurementsKnurled clamp screw with left hand thread for one hand operationCompact, pocket sizeKnurled thumb...

Quadrant adjusting nut for fine adjustmentsSturdy constructed joint with quadrant, eliminates side deflection of the legsForged steel, tempered and polished legsRemovable, adjustable point can be...

Bodies are made from steel, nicely knurled and nickel-platedBlades are made from the best quality steel, properly tempered and nickel-platedAll blades are replaceableBlades can be reversed into the...

Cuts harder materialsFits Black & Decker, Greenlee, Milwaukee, Rockwell, Ridgid, Porter-Cable, Skil, and Unitec machine modelsFor general purpose cutting on portable bandsaw machinesReady-to-...

Multi-purpose uses include 45‚° miter, depth gage, height gage, marking or scribing gage, a level, a plumb, and a precision ruleReversible lock bolt allows blade to be turned over or end-for-end,...

Double graduations from 0-180‚° in opposite directions permitting the direct reading of angles and supplementary anglesThe back of the tool is flat for ease of useThe blade can be locked firmly at...

Two vials at right angles which permit leveling in both directions without moving the level from the workThe level is light and compact, with an attractive black wrinkle finish and a ground reference...

Will firmly hold square or round shanksPlunger operated by knurled sleeveSpring inside sleeve causes plunger to back off when pressure is removedRound shanks can be gripped, but care must be...

Fits blades 12 in and upBlack Wrinkle FinishProtractor Head ¢¢¬¢‚¬Å“ Cast IronNonreversible and Reversible Available

Knife-edge contacts for both inside and outside measurementsOne hand use with the thumb-operated, fine adjustment rollLock screw for dial bezelLock screw for holding the sliding jaw in...

Rust resistantQuick readingDurable

In a compact, sturdy plastic rewindable dispenser caseRewind feature permits retracting thinner feeler stock into the case, preventing damageMade of the finest tempered steelMarked every 6" or 150 mm...

Highly useful tools for internal linear measurements such as measuring cylinders, rings, setting calipers, comparing gages, and measuring parallel surfacesThe extension rods are made of steel tubing,...

Leaves made of finest tempered-steel, carefully finished to correct thickness, individually tested and marked with thicknessLocking device on most gagesRugged, substantial steel case protects...

Legs are made from flat stockFulcrum stud is hardened and has a smooth bearing surfaceStrong, flexible bow springHigh-grade steel construction

Fully hardened molybdenum high speed steelIdeal blades for long wear life and top performance in sawing a wide range of materialsWithstands heavier feed pressures better than other hacksaw bladesFor...

Highly useful tools for internal linear measurements such as measuring cylinders, rings, setting calipers, comparing gages, and measuring parallel surfacesThe extension rods are made of steel tubing,...

Electronic calipers measure internal, external, depth, and step dimensions to an accuracy of 0.001 in up to 60 in rangeData output and IP rating options available

Rust resistantQuick readingDurable

Steel, properly tempered and well finishedPoints are finely taperedHandle, as well as the points, have a knurled grip

Have a square knurled grip and will not roll when laid downHardened and properly temperedTips are accurately centered and ground at the proper angle to give maximum service

Inserts in place of the end plug at the top of the indicator bodyThe shank will fit into chucks and also into snugs

For holding taps, drills, reamers, and other small tools to be turned by handCentered body, for use on lathe centers or on upright drilling machines to start the tap straightJaws conform to the tool...