Flange Pins & Aligners

The Magnetic Flange Aligner with the newest OFF/ON 90 lb. holding power magnet technology. The Magnetic Flange Aligner is your third hand and has no threads or nuts to deal with while working on your project. Thickness of the flange is no longer an issue...

Much faster Have no more threads to damage No nuts that need to be screwed on

Much faster Have no more threads to damage No nuts that need to be screwed on

Flange Wizard: Pipe Flange Aligners, 1/2 in - 1 15/16 in, Threaded Description:Features slotted pins with "friction fitting" knurled nuts for flanges to 30" - 150 lbs All models of the Pipe aligner will two-hole (make 2 holes of the flange...

Flange Wizard: Pipe Flange Aligners, 1/2 in - 1 7/16 in, Threaded Description:Features slotted pins with "friction fitting" knurled nuts for flanges to 30" - 150 lbs All models of the Pipe aligner will two-hole (make 2 holes of the flange...

Flange Wizard: Pipe Magician's Cases, 1/2 in - 1 7/16 in, Two Hole Description:A person who works with pipe needs the finest tools available and a way to protect them when not in use Durable locking polypropylene case Kit includes a standard...

Flange Wizard: Two Hole Pins, 1/2 in - 1 15/16 in, Large Threaded Description:Machined from hardened steel for durability and longevity Utilize fast double lead threads instead of ACME threads for a more reliable hold over time Lightweight 

Flange Wizard: Two Hole Pins, 1/2 in - 1 7/16 in, Threaded Description:Machined from hardened steel for durability and longevity Utilize fast double lead threads instead of ACME threads for a more reliable hold over time Lightweight 

Flange Wizard: Two Hole Pins, 5/16 in - 63/64 in, Two Hole Description:Machined from hardened steel for durability and longevity Utilize fast double lead threads instead of ACME threads for a more reliable hold over time Lightweight 

Flange Wizard: Two Hole Pins, 5/8 in - 3 in, Extra Large Threaded Description:Machined from hardened steel for durability and longevity Utilize fast double lead threads instead of ACME threads for a more reliable hold over time Lightweight 

The Curv-O-Mark Aligner Base is notched at either end for ease in aligning on the centerline of the pipe Has two 25-pound pull, cast-in magnets for holder in either a flat horizontal or vertical position The base will accept either leg of a standard or...

Features slotted pins with "friction fitting" knurled nuts for flanges to 30" - 150 lbs All models of the Pipe aligner will two-hole (make 2 holes of the flange horizontally level with the ground) and vertically level the face of the flange in one step...

Sumner: Qwik Pins, 5/8 in - 1 5/8 in Description:For fast, accurate alignment of carbon pipe flanges Quick installing pins work as convenient reference points to level flange for tack and weld-out no tools needed Features Acme threads for maximum...

Two hole and level in one time-saving operation Uses push button Quik Pin nuts for fast action Features stub acme threads for maximum clamping and hardened steel for lasting use