Grease Fittings

Designed for fast production line installation in untapped holes to save thread tapping costsCircumferential serrations on shank provide a hydraulic tight seal when fitting is installed properly

Features dirt excluding plunger check valve

Features dirt excluding plunger check valve

For use on gear box housings and bearings, (such as king pins, universal joints, etc.), where excessive lubricant pressures are not desirableThese safety valves open at the pre-determined pressures shown in table

Alemite Compressed Air Components allow you to accurately and reliably regulate, clean, dry and lubricate the air going into your systemThese high quality components improve productivity by reducing the risk of down time due to poor quality air supply

Greater corrosion resistance than stainless steel‚ Ideal for use in harsh chemical environments and marine applications‚ 

Greater corrosion resistance than stainless steel‚ Ideal for use in harsh chemical environments and marine applications‚ 

For installations where protruding fittings cannot be usedFittings sit flush, and are not easily damagedFor use on line shafting pulleys or revolving bearings

This type of fitting is designed for use on cars, trucks and a variety of industrial machinesIt features a dirt excluding check ball to reduce dirt contamination

This type of fitting is designed for use on cars, trucks and a variety of industrial machinesIt features a dirt excluding check ball to reduce dirt contamination

Used extensively to avoid tapping costs in a wide variety of applicationsAlemite serrated shank grips securely and simplifies the replacement of damaged fittings in old or oversized holesRecommended only for low and medium pressures

Used extensively to avoid tapping costs in a wide variety of applicationsAlemite serrated shank grips securely and simplifies the replacement of damaged fittings in old or oversized holesRecommended only for low and medium pressures

Used extensively to avoid tapping costs in a wide variety of applicationsAlemite serrated shank grips securely and simplifies the replacement of damaged fittings in old or oversized holesRecommended only for low and medium pressures

Used extensively to avoid tapping costs in a wide variety of applicationsAlemite serrated shank grips securely and simplifies the replacement of damaged fittings in old or oversized holesRecommended only for low and medium pressures

Thread forming fittings have special tapered drive threads to reshape the material in an untapped hole to provide a leak-proof sealThey are most effectively installed by spinning into the untapped hole, but they also may be driven straight into the...

All have high pressure ball check unless otherwise specifiedRoHS compliantTrivalent clear zinc plating

Carbon steel fitting with zinc-plated finishUsed on industrial machines and heavy equipment

To improve reliability of the check valve in these fittings, keep input passages free of foreign particlesRedundancy of seal should be provided in critical applications where back pressure must be maintained

Carbon steel fitting with zinc-plated finishUsed on industrial machines and heavy equipment

For use on gear box housings and bearings, (such as king pins, universal joints, etc.), where excessive lubricant pressures are not desirableThese safety valves open at the pre-determined pressures shown in table