Lifting Clamps

One man can handle plates with this clamp Dual springs hold cam on the work while the second clamp is placed 100 % proof tested with certificate of test attached to each clamp

Recommended for turning plates from horizontal to vertical as well as through a 180 degree arc The convex, serrated cam swivels on a ball joint so that the area of cam engagement increases as load increases Drop forged body and shackle 100% proof tested...

Recommended for turning plates from horizontal to vertical as well as through a 180 degree arc The convex, serrated cam swivels on a ball joint so that the area of cam engagement increases as load increases Drop forged body and shackle 100% proof tested...

Designed to carry or pull any object that will fit into its jaws Grips and releases automatically

"GX" clamp is entirely drop forged and heat treated Can be used for both vertical and horizontal-to-vertical lifting Exclusive feature is a patented wear indicator system When any of cam's straight line, convex teeth are flattened between unique wear...

Clamps lifts from either horizontal or vertical position Locks open or closed with a lever Has large throat that gives a secure bite and wide grip range Be sure clamp is in lock closed position before making lift 100% proof tested with certificate of...

Designed for a secure bite or add shaped, wide flanged beams Designed to be used with the short leg under the plate when lifting the plate from horizontal to vertical position Replacement parts are same as for standard "GX" clamps 100% proof tested with...

Available in a 1/2, 1 and 2 ton capacity Drop forged and heat treated components, with gripping surfaces of case hardened alloy steel Exclusive feature is a patented wear indicator system When any of cam's straight line, convex teeth are flattened...

Lifts drums with or without heads removed Drums can be lifted from either horizontal or vertical positions and then reversed Snaps onto drum and is held there by it's spring-loaded cam even when there is no load This clamp is not suitable for lifting...

"GX" clamp is entirely drop forged and heat treated Can be used for both vertical and horizontal-to-vertical lifting Exclusive feature is a patented wear indicator system When any of cam's straight line, convex teeth are flattened between unique wear...

Designed for a secure bite or add shaped, wide flanged beams Designed to be used with the short leg under the plate when lifting the plate from horizontal to vertical position Replacement parts are same as for standard "GX" clamps 100% proof tested with...

"GX" clamp is entirely drop forged and heat treated Can be used for both vertical and horizontal-to-vertical lifting Exclusive feature is a patented wear indicator system When any of cam's straight line, convex teeth are flattened between unique wear...

"GX" clamp is entirely drop forged and heat treated Can be used for both vertical and horizontal-to-vertical lifting Exclusive feature is a patented wear indicator system When any of cam's straight line, convex teeth are flattened between unique wear...

Double sling assembly consisting of 9/32" alloy chain Chain legs connected by Quik-Alloy coupling links

Fitted with the chain connector in place of the clamp shackle Use of this clamp increases the flexibility of multiple leg chain slings Clamp is made of drop forged and heat treated alloy steel

Available in a 1/2, 1 and 2 ton capacity Drop forged and heat treated components, with gripping surfaces of case hardened alloy steel Exclusive feature is a patented wear indicator system When any of cam's straight line, convex teeth are flattened...

Clamps lifts from either horizontal or vertical position Locks open or closed with a lever Has large throat that gives a secure bite and wide grip range Be sure clamp is in lock closed position before making lift 100% proof tested with certificate of...

Designed to lift stacked plates from horizontal to vertical positions The long sharp leg can be driven between the top two plates to fully engage the clamp 100% proof tested with certificate of test attached to each clamp Replacement parts are same as...

Designed for a secure bite or add shaped, wide flanged beams Designed to be used with the short leg under the plate when lifting the plate from horizontal to vertical position Replacement parts are same as for standard "GX" clamps 100% proof tested with...

Recommended for turning plates from horizontal to vertical as well as through a 180 degree arc The convex, serrated cam swivels on a ball joint so that the area of cam engagement increases as load increases Drop forged body and shackle 100% proof tested...

Has a rubber covered pad and cam of relatively smooth metal conditioned to grip tightly Should be used to lift plates with a hardness over 43 Rockwell C/400 Brinell Lifts heavy plates with minimum marring 100% proof tested with certificate of test...

Designed to carry or pull any object that will fit into its jaws Grips and releases automatically

Designed for a secure bite or add shaped, wide flanged beams Designed to be used with the short leg under the plate when lifting the plate from horizontal to vertical position Replacement parts are same as for standard "GX" clamps 100% proof tested with...

Available in a 1/2, 1 and 2 ton capacity Drop forged and heat treated components, with gripping surfaces of case hardened alloy steel Exclusive feature is a patented wear indicator system When any of cam's straight line, convex teeth are flattened...

Magswitch: Heavy Lifters, 1,300 lb WWL, 1 in Grip Description:Dual hook for stability Lock on and off Magswitch technology Replaceable pole shoes Use single hook for lift to sheer 

Magswitch: Heavy Lifters, 762 lb Load Cap, 1/2 in Grip Description:Dual hook for stability Lock on and off Magswitch technology Replaceable pole shoes Use single hook for lift to sheer 

Apex Tool Group: GX Replacement Cam/Pad Kits, 1 ton WWL Description:Replacement cam/pad kit for 1 ton clamps used for industrial plate steel lifting Repair kit for one-ton Merril GX Clamp Kit contains: 1 Cam, 1 Pad, 1 Cam Pin, 1 T-Spring, 1 Pad Pin,...

Apex Tool Group: GX Clamps, 1 ton WWL, 1/16 in-3/4 in Grip Description:"GX" clamp is entirely drop forged and heat treated Can be used for both vertical and horizontal-to-vertical lifting Exclusive feature is a patented wear indicator system When...

Apex Tool Group: GX Clamps, 1/2 ton WWL, 1/16 in-5/8 in Grip Description:"GX" clamp is entirely drop forged and heat treated Can be used for both vertical and horizontal-to-vertical lifting Exclusive feature is a patented wear indicator system When...