Flange Wizard Pipe Flange Aligner, 1/2 in, 2 in, Magnetic (1 EA / EA)
Images may not be exact. Please refer to Part # and Description.
Need Some Help?
Get real service from real
people, that know the products!
Flange Wizard Pipe Flange Aligner, 1/2 in, 2 in, Magnetic (1 EA / EA) Specifications
-
Hole Diam [Max]:2 in
-
Hole Diam [Min]:1/2 in
-
Includes:(2) Small Cones for flange holes 1/2 in to 1-7/16 in in diameter;(2) Large Cones for flange holes 1/2 in to 1-15/16 in in diameter. (1) ON/OFF switch
-
Material:Aluminum
-
Pin Type:Magnetic
Help us improve our product information
Description
The Magnetic Flange Aligner with the newest OFF/ON 90 lb. holding power magnet technology.
The Magnetic Flange Aligner is your third hand and has no threads or nuts to deal with while working on your project. Thickness of the flange is no longer an issue.
Two (2) sizes of Centering Alignment Cones are included: Small Cones for flange holes 1/2 to 1-7/16-inch in diameter and Large Cones for flange holes 1/2 to 1-15/16-inch in diameter.
The New Aligner comes in a compact case that will protect the tool from damage and keep it together in one place ready to use.
The Magnetic Flange Aligner is your third hand and has no threads or nuts to deal with while working on your project. Thickness of the flange is no longer an issue.
Two (2) sizes of Centering Alignment Cones are included: Small Cones for flange holes 1/2 to 1-7/16-inch in diameter and Large Cones for flange holes 1/2 to 1-15/16-inch in diameter.
The New Aligner comes in a compact case that will protect the tool from damage and keep it together in one place ready to use.
Related Products
Flange Wizard
Flange Wizard On/Off Magnetic Block for Burning Guides, Two Blocks, Fits up to 1/8 in Thick Standard Square or Straight Edge (2 EA / BX)
$74.98
On/Off magnetic support blocks can be attached to any standard square or straight edge, up to 1/8 inch thick, to form your own burning guidesBlocks are machined from aluminum and have grooves on...
496-MSB202
Flange Wizard
Flange Wizard Pipe Flange Aligner, 1/2 in to 1-15/16 in, Threaded (1 SET / SET)
$116.04
The Magnetic Flange Aligner with the newest OFF/ON 90 lb. holding power magnet technology.The Magnetic Flange Aligner is your third hand and has no threads or nuts to deal with while working on your...
496-38240-TL
Flange Wizard
Flange Wizard Pipe Flange Aligner, 1/2 in to 1-7/16 in, Threaded (1 ST / ST)
$93.80
The Magnetic Flange Aligner with the newest OFF/ON 90 lb. holding power magnet technology.The Magnetic Flange Aligner is your third hand and has no threads or nuts to deal with while working on your...
496-38240-T
Flange Wizard
Flange Wizard Magnetic Centering Head with Vial, 1 in and Larger Pipe Capacity, Small (1 EA / EA)
$65.77
One piece Y-shaped body design with magnetic legsBuilt-in dial with 2-1/2° increments that turns 360°Hardened center punch marks set position by taping with a hammerUsed to establish and mark a...
496-53025-M
Flange Wizard
Flange Wizard Miter Marker, On/Off Magnet, 1-1/2 in to 18 in Pipe Cap, Corrosion/Moisture/Rust Resistant, Incl Case/Structural Adaptor (1 EA / EA)
$193.94
Features newest on/off magnet technologyUnique design allows you to telescope out over existing welds to layout angles or change the angles of pipe fittingsDesigned to accommodate 1 1/2 inch to 18...
496-MMS505
Flange Wizard
Flange Wizard Universal Magnetic Tape Holder, 5/8 in Square x 4 in L (1 EA / EA)
$16.52
A strong 25 pound pull magnet set in epoxy secures the tape holder to your workIt has been redesigned with no removable parts and works with most industrial measuring tapesIt is a great little...
496-89754