L.S. Starrett

The tape line which has a tough-baked yellow enamel-coated line instead of a satin chrome finished lineThe well-designed case is made of steel covered with tough, durable red vinylThe long handle and...

Spring-TemperedQuick Reading

High quality precision steel rule is flat with permanent adhesive backCut to size with scissorsFor mounting on workbenches, saw tables, drafting tables, etc.

Specially selected tool steel is hardened and tempered to the proper hardnessKnurled finger grips for ease of handlingA special tempering process makes the head less likely to fracture from a hard,...

Rust resistantQuick readingDurable

Convenient attachment of scribers and test indicator shanks to surface gauges, magnetic bases, indicator tool post holders and gauge rods5/16 in, 3/8 in Spindle hole diameters; 9/64 in, 5/32 in, 3/16...

Specially selected tool steel is hardened and tempered to the proper hardnessKnurled finger grips for ease of handlingA special tempering process makes the head less likely to fracture from a hard,...

Single workpiece and miter angles

The gage has a total of 29 holes, each marked with the drill size in inches and the decimal equivalent

Micrometer data output connector assembly, 2 meters long

Will firmly hold square or round shanksPlunger operated by knurled sleeveSpring inside sleeve causes plunger to back off when pressure is removedRound shanks can be gripped, but care must be...

With 1/4" high speed steel pilot drillSet-screw in the body allows easy pilot drill replacementPermits instant change of hole saw blades without tools and without removing the arbor from the...

Measuring rods are solid and assembled on one side of the micrometer headRods are insulatedHardened and ground anvilsQuick-reading figures ¢¢¬¢â¬âœ every thousandth numberedEach rod marked with length

Rounded ends ¢¢¬¢â¬âœ no ragged edges make stock easier to work withEach piece marked with thickness and in individual envelopeWith convenient 3/16" (5 mm) hole punched in the end for hangingFor use...

Legs are made from flat stockFulcrum stud is hardened and has a smooth bearing surfaceStrong, flexible bow springHigh-grade steel construction

Bodies are made from steel, nicely knurled and nickel-platedBlades are made from the best quality steel, properly tempered and nickel-platedAll blades are replaceableBlades can be reversed into the...

Highly useful tools for internal linear measurements such as measuring cylinders, rings, setting calipers, comparing gages, and measuring parallel surfacesThe extension rods are made of steel tubing,...

Multi-purpose uses include45â miter, depth gage, height gage, marking or scribing gage, a level, a plumb, and a precision ruleSteel scriberReversible lock bolt allows blade to be turned over or...

Multi-purpose uses include45â miter, depth gage, height gage, marking or scribing gage, a level, a plumb, and a precision ruleSteel scriberReversible lock bolt allows blade to be turned over or...

Rust resistantQuick readingDurable

Powerful, permanent magnet attaches to the threaded studNo clamps, rods, or snugs needed5/16 in - 24 threaded stud back replaces standard lug backAnti-magnetic indicators are not requiredFor...

Fully hardened molybdenum high speed steelIdeal blades for long wear life and top performance in sawing a wide range of materialsWithstands heavier feed pressures better than other hacksaw bladesFor...

Squareness accuracy to .0002" (0.005mm) for every 6" (150mm)Beam machined at the inner corner for clearance

This gage is the generally accepted standard for non-ferrous metalsScrew slotting cutters are also made to this gageFor gaging sheet, plate, and wire made of non-ferrous metals like copper, brass,...

Multi-purpose uses include: 45â miter, depth gage, height gage, marking or scribing gage, a level, a plumb, and a precision ruleHardened, machine divided graduations, bladeReversible lock bolt allows...

Convenient attachment of scribers and test indicator shanks to surface gauges, magnetic bases, indicator tool post holders and gauge rods5/16 in, 3/8 in Spindle hole diameters; 9/64 in, 5/32 in, 3/16...

Pitch marked on leafNarrow design of leaves permits checking of internal threads and external threadsSteel case with folding leaves at both endsFor determining the pitch of various threads

Multi-purpose uses include45â miter, depth gage, height gage, marking or scribing gage, a level, a plumb, and a precision ruleReversible lock bolt allows blade to be turned over or end-for-end,...

Solid nutStrong, flexible bow springFulcrum stud is hardenedBearing surfaces of legs are large enough to prevent any side deflectionAdjustment screw is centrally located in the legs to assure smooth...

Rust resistantQuick readingDurable

Smooth, jeweled lever actionPositive reversing switchHard chrome-plated ratchet contact pointHalf-shaded yellow for clarityInterchangeable contact tips

Straight leavesLeaves made of finest tempered-steel, carefully finished to correct thickness, individually tested and marked with thicknessLocking device on most gagesLeaves easily removed or...

Non-rotating, blade-type rodsComes with the combination ratchet and speeder for uniform pressure and quicker adjustment2 1/2" base length0.45 x 1/8" rod sizeAdjustable measuring rod

Extra-longWell proportioned, hardened, properly tempered, and have a knurled gripFor following long cotter pins and the like into holes with out hindrance

Multi-purpose uses include: 45â miter, depth gage, height gage, marking or scribing gage, a level, a plumb, and a precision ruleHardened, machine divided graduations, bladeReversible lock bolt allows...

Parallel, accurate, flexible rules are made of anodized aluminumEdges are smooth, square and straightRules lie flat, resist bending and feature large, easy-to-read screen printed numbers

Rounded ends ¢¢¬¢â¬âœ no ragged edges make stock easier to work withEach piece marked with thickness and in individual envelopeWith convenient 3/16" (5 mm) hole punched in the end for hangingFor use...

Insulated rod holder to eliminate expansion by heat when hand heldAttractive nickel-plated finishsatin-chrome finish on micrometer head reading surfacesRods are accurately graduated in inches...

In a compact, sturdy plastic rewindable dispenser caseRewind feature permits retracting thinner feeler stock into the case, preventing damageMade of the finest tempered steelMarked every 6" or 150 mm...