Punches

Manufactured from shock-resistant tool steel for unequalled strength, toughness, and durabilityFull shank heat treatPin area precision ground to prevent any "binding" in work area

Manufactured from shock-resistant tool steel for unequalled strength, toughness, and durabilityFull shank heat treatPin area precision ground to prevent any "binding" in work area

Manufactured from shock-resistant tool steel for unequalled strength, toughness, and durabilityFull shank heat treatPin area precision ground to prevent any "binding" in work area

Manufactured from shock-resistant tool steel for unequalled strength, toughness, and durabilityFull shank heat treatPin area precision ground to prevent any "binding" in work area

Softened and tapered striking end reduces potential to chipGround surface for ease of identificationPrecision Harded working endsUsed for marking center lines and pilot drill locations

Aligns holes in two or more pieces of metal through which a bolt or screw is to be insertedModified parabolic striking end for resistance to mushrooming and chippingFor installing pins and rivets and for starting their removal

Aligns holes in two or more pieces of metal through which a bolt or screw is to be insertedModified parabolic striking end for resistance to mushrooming and chippingFor installing pins and rivets and for starting their removal

Aligns holes in two or more pieces of metal through which a bolt or screw is to be insertedModified parabolic striking end for resistance to mushrooming and chippingFor installing pins and rivets and for starting their removal

Heat treated Sheffield forged steelInside taper for clearance

Ends are ground square for accurate pin drivingTool steel punches are uniformly heat treated and centerless ground to withstand the hardest use

Replaceable hardened steel point and shaftSpring tension adjusts for light or heavy strokes and markingOne-handed spring impact operation; no hammer needed

Replacement steel point for Heavy Duty Automatic Center PunchMade from hardened tool steel

Heat treated Sheffield forged steelInside taper for clearance

Unique ball bearing actionAll-steel solid point is replaceableLong wearing alloy steel parts

Ends are ground square for accurate pin drivingTool steel punches are uniformly heat treated and centerless ground to withstand the hardest use

Softened and tapered striking end reduces potential to chipGround surface for ease of identificationPrecision Harded working endsUsed for marking center lines and pilot drill locations

Six tapered and hollow, hardened steel punches

Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free

Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free

Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free

Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free

Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free

Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free

Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free

Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free

Heat-treatedSmooth ground points

Heat-treatedSmooth and correctly tapered point

Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free

Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free

Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free

Head attached with wire rope to reduce shockHeat-treated punch, so it will not shatterLong, two-handed rubber handle to lessen shocks from blowsUrethane ring around head to reduce likelihood of chippingUsed to safely drive out pins and keys in machinery

Head attached with wire rope to reduce shockHeat-treated punch, so it will not shatterLong, two-handed rubber handle to lessen shocks from blowsUrethane ring around head to reduce likelihood of chippingUsed to safely drive out pins and keys in machinery

Heat-treated

Heat treated Sheffield forged steelInside taper for clearance

Eliminates hand sawing and filing when making keyways for push button switchesFor 7/8" or 1-7/32" push button holes

Non-sparkingNon-marringPrevents damage to object being struck

1 piece designHigh hardness tip for durabilityStraighter tip prevents bindingModified parabolic striking end for greater resistance to mushrooming and chipping

Used to align holes through which rivets, pins, or bolts will be insertedNot for use when driving pins, rivets, or boltsVariable point size, shank size, and taper length for the perfect alignmentBlack oxide finish for additional rust protection

For driving out and removing already loosened pins and keys after initial movement by a solid punchFull finish

Inside taper permits the punchings to clear easily through the barrelPunches have fully polished barrel and black enamel handleAdditional sizes available upon request