Punches

1 piece designHigh hardness tip for durabilityStraighter tip prevents bindingModified parabolic striking end for greater resistance to mushrooming and chipping

Heat-treated for strength and ductilityModified parabolic striking end for resistance to mushrooming and chipping

Two-piece designHeat-treated for strength and ductilityModified parabolic striking end for resistance to mushrooming and chipping

Extra-longWell proportioned, hardened, properly tempered, and have a knurled gripFor following long cotter pins and the like into holes with out hindrance

Modified parabolic striking end for resistance to mushrooming and chippingFor metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points

For driving out and removing already loosened pins and keys after initial movement by a solid punchFull finish

Solid punches are used for loosening seized or tight pins or keys, or knocking out rivetsMany sizes are available to match different sized keys and pinsUsed in conjunction with pin punchesPunches are covered with a black oxide finish to protect from...

This tool can drive and remove roll pins and other hollow tension pinsAvailable in many fractional and metric sizes, the proper punch exists for all pin configurations

Used for piercing, or marking for starting drills, in metal and other materialsPoint sizes vary for larger or smaller holesAvailable in black oxide finish for additional rust protection

Two-piece designHeat-treated for strength and ductilityModified parabolic striking end for resistance to mushrooming and chipping

Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind

Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind

Head attached with wire rope to reduce shockHeat-treated punch, so it will not shatterLong, two-handed rubber handle to lessen shocks from blowsUrethane ring around head to reduce likelihood of chippingUsed to safely drive out pins and keys in machinery

Have a square knurled grip and will not roll when laid downHardened and properly temperedTips are accurately centered and ground at the proper angle to give maximum service

Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind

Heat-treared for strength and ductilityModified parabolic striking end for greater resistance to mushrooming and chippingFor use in extremely harsh environments

Heat-treared for strength and ductilityModified parabolic striking end for greater resistance to mushrooming and chippingFor use in extremely harsh environments

Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind

Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind

This tool can drive and remove roll pins and other hollow tension pinsAvailable in many fractional and metric sizes, the proper punch exists for all pin configurations

Prick punches are used to scribe lines in metal before cutting or rivetingThe point sizes vary for different widthsThe sharp angle of the punch is specifically designed to scribe lines in metal, and the tool is covered in a black oxide finish to prevent...

This tool can drive and remove roll pins and other hollow tension pinsAvailable in many fractional and metric sizes, the proper punch exists for all pin configurations

Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keysExtensive sizes are available as well as a black oxide finish for rust protection

Used to align holes through which rivets, pins, or bolts will be insertedNot for use when driving pins, rivets, or boltsVariable point size, shank size, and taper length for the perfect alignmentBlack oxide finish for additional rust protection

Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keysExtensive sizes are available as well as a black oxide finish for rust protection

Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind

Two-piece designHeat-treated for strength and ductilityModified parabolic striking end for resistance to mushrooming and chipping

Inside taper permits the punchings to clear easily through the barrelPunches have fully polished barrel and black enamel handleAdditional sizes available upon request

Aligns holes in 2 or more pieces of metal through which a bolt or screw is to be insertedModified parabolic striking end for greater resistance to mushrooming and chippingFor sheet metal working layout such as scribing and for punch starting holes for...

This tool can drive and remove roll pins and other hollow tension pinsAvailable in many fractional and metric sizes, the proper punch exists for all pin configurations

Prick punches are used to scribe lines in metal before cutting or rivetingThe point sizes vary for different widthsThe sharp angle of the punch is specifically designed to scribe lines in metal, and the tool is covered in a black oxide finish to prevent...

For driving out and removing already loosened pins and keys after initial movement by a solid punchFull finish

Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keysExtensive sizes are available as well as a black oxide finish for rust protection

Used for piercing, or marking for starting drills, in metal and other materialsPoint sizes vary for larger or smaller holesAvailable in black oxide finish for additional rust protection

Used to align holes through which rivets, pins, or bolts will be insertedNot for use when driving pins, rivets, or boltsVariable point size, shank size, and taper length for the perfect alignmentBlack oxide finish for additional rust protection

Used to align holes through which rivets, pins, or bolts will be insertedNot for use when driving pins, rivets, or boltsVariable point size, shank size, and taper length for the perfect alignmentBlack oxide finish for additional rust protection

Used to align holes through which rivets, pins, or bolts will be insertedNot for use when driving pins, rivets, or boltsVariable point size, shank size, and taper length for the perfect alignmentBlack oxide finish for additional rust protection

Brass punches are used instead of steel punches in non- marring applications and to constrain sparkingThe consumable brass is designed not to mar steelMany sizes are available for proper application

Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keysExtensive sizes are available as well as a black oxide finish for rust protection

This tool can drive and remove roll pins and other hollow tension pinsAvailable in many fractional and metric sizes, the proper punch exists for all pin configurations