Punch & Chisel Sets

Non marring¢¢¬¢‚¬ideal for work where a strong positive blow is necessary without damaging the work surfaceNon-sparking¢¢¬¢‚¬ideal for working on heavy equipment, in mines and explosive atmospheresFlat tip is used for installing and removing pins and...

Non marring¢¢¬¢‚¬ideal for work where a strong positive blow is necessary without damaging the work surfaceNon-sparking¢¢¬¢‚¬ideal for working on heavy equipment, in mines and explosive atmospheresFlat tip is used for installing and removing pins and...

Non marring¢¢¬¢‚¬ideal for work where a strong positive blow is necessary without damaging the work surfaceNon-sparking¢¢¬¢‚¬ideal for working on heavy equipment, in mines and explosive atmospheresFlat tip is used for installing and removing pins and...

Made from S2 steel and specially heat-treated for greater strength and durabilityTwo-piece design allows the tip to be hard for durability while allowing it to be produced straight to help prevent bindingModified parabolic striking end to help reduce...

Non-marring/non-sparking, will not damage harder steel materialsKnurled handle for a more secure gripComes in an anti-slip pouch with hook and loop fastening system with individual slots for convenient storagePopular uses: aligning steel, car repairs,...

Hollow Punches are used to create precise gaskets and washers in softer materials, like cloth, vinyl, leather, light sheet metal, and gasket metal.Many sizes, kits, handles, and mandrels are available for extensive configurations.The dual cutting heads...

Made of tool steel, hardened and centerless groundFor use on work that's not accessible with shorter punchesKnurled bodyPacked in a vinyl caseGround square end

Set includes four long taper punches for installing or removing pins and shafts to align holesHeat-treated alloy steelSoftened and tapered striking end reduces potential for chipping

4 in long with knurled bodiesHeat-treated tool steel with centerless-ground ends

Heat treated Sheffield forged steelMachined to close tolerances for creating precise holes in gasket material, rubber and soft metals

Set includes pin punches for removing or driving out pins and rivetsHeat-treated alloy steelSoftened and tapered striking end reduces potential for chipping

For punching holes in leather, rubber, canvas, cardboard, plastic and other materialsMade of forged steelSide clearance hole for easy removal of punched material

Body is knurled with threaded coupling to prevent slippage

Set includes four cold chisels designed to cut metal, including wrought iron, steel, brass and aluminumHeat-treated alloy steelSoftened and tapered striking end reduces potential for chipping

Set includes four cold chisels, four pin punches, one long taper punch, one center punch, one starter and one starter punchHeat-treated alloy steelComes with convenient pouch for storage and transport

Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keysExtensive sizes are available as well as a black oxide finish for rust protection

Set includes cold chisels, solid punches and pin punchesBlack oxide finish for additional rust protection

Pilot punches, an original Mayhew patented design, also called a roll pin punch, are a punch that fits tightly within a roll pinThis tool can drive and remove roll pins and other hollow tension pinsAvailable in many fractional and metric sizes, the...

Hollow Punches are used to create precise gaskets and washers in softer materials, like cloth, vinyl, leather, light sheet metal, and gasket metalMany sizes, kits, handles, and mandrels are available for extensive configurationsThe dual cutting heads...

The Mayhew 85002 Handguard Set, 4-Piece, includes: 12205 - 3/4-Inch by 12-Inch Hand guarded Chisel, 35005 - 3-Inch Hand guarded Brick Set, 35705 - 2-1/4-Inch by 7-3/4-Inch Handguard Mason Chisel, 94105 - 2-1/2-Inch Hand guarded Floor ChiselMayhew stands...

Made from S2 heat-treated steel for strength and durabilityModified parabolic striking end reduces mushrooming and chippingCorrosion- and rust-resistant black oxide finish extends life of tools

Hand ground cutting edgeHardened, quenched and tempered to precise specifications

Properly hardenedUsed for accurate transferring of threaded, drilled or tapped holes

Hollow Punches are used to create precise gaskets and washers in softer materials, like cloth, vinyl, leather, light sheet metal, and gasket metalMany sizes, kits, handles, and mandrels are available for extensive configurationsThe dual cutting heads...

Hollow Punches are used to create precise gaskets and washers in softer materials, like cloth, vinyl, leather, light sheet metal, and gasket metalMany sizes, kits, handles, and mandrels are available for extensive configurationThe dual cutting heads also...

Hand ground cutting edgeHardened, quenched and tempered to precise specifications

Made from S2 steel and specially heat-treated for strength and durabilityOne-piece design for strength and durabilityReverse taper to help prevent bindingModified parabolic striking end to help reduce mushrooming and chippingBlack oxide finish to help...

Hollow Punches are used to create precise gaskets and washers in softer materials, like cloth, vinyl, leather, light sheet metal, and gasket metalMany sizes, kits, handles, and mandrels are available for extensive configurationsThe dual cutting heads...

Center punches are used for piercing, marking or starting drills in metal and other materialsThe points differ to achieve the most appropriate hole sizeThis punch is not meant for scribing lines in metalA black oxide finish is added to protect from rust

Handle resists deformation, most solvents, and corrosive liquidsCarbon alloy steel blades are 3-in (76mm) longPrecision ground blade with lacquered coating for corrosion protectionCutting edge is honed and ready for use right off the shelfIncluded blade...

Hand ground cutting edgeHardened, quenched and tempered to precise specifications

1 piece designShock resistant tool steelHand ground cutting edgeHardened, quenched, and tempered to precise specifications

Larger striking surface than standard chisels allows the safe use of a larger striking tool and directs more power to the cutting edge.Cutting edge is ground to exact angle for easy cutting.A polished identification panel on one of the flats is marked...

Made from S2 steel and specially heat-treated for strength and durabilityOne-piece design for strength and durabilityReverse taper to help prevent bindingModified parabolic striking end to help reduce mushrooming and chippingBlack oxide finish to help...

One-piece construction forged for strengthHardened, quenched, and tempered for long life and durabilityPowder-coated finish for easy visibility

Alloy steel construction with a sand blasted finishIncludes 1/8, 3/16, 1/4 in. Pin Punches; 3/16 in. Center Punch; 3/16 in. Solid Punch; 3/8, 5/8, 1/2 in. Cold Chisels; Pouch

Have a square knurled grip and will not roll when laid downHardened and properly temperedTips are accurately centered and ground at the proper angle to give maximum service