Dixon Valve

Recommended for low-pressure discharge and suction service for compatible liquidsWorking pressure may vary with the construction of the hose, the type of clamping system used and the applicationNot...

Buna seals are standard in all couplersGlobal cam and groove are intended for the transfer of products such as water and sewage in non-critical applications in the agricultural and construction...

Supplied standard with a Buna-N gasketPrecision machined to rigid tolerancesStainless pins will not rust or bind, providing great strength and safetyRecess holds gasket firmly in place and ensures...

Blow-out proof stem designTemperature range: -20‚°F to 356‚°FNot recommended as a throttling valveFor use with water, oil and gas

Four-piece constructionStainless steel band and housingCorrosion-resistant

Buna seals are standard in all couplersGlobal cam and groove are intended for the transfer of products such as water and sewage in non-critical applications in the agricultural and construction...

For use with center punch clamp tools F1, F38, F40 and F100Preformed

Buna seals are standard in all couplersGlobal cam and groove are intended for the transfer of products such as water and sewage in non-critical applications in the agricultural and construction...

Four-piece constructionMaximum recommended torque 50 in‚·lb

Safety clip includedSupplied with rubber washer (AWR4)Brass, iron, or 316 stainless steel constructionPressure rating of 150 psi at ambient temperature 70‚° F

Blow-out proof stem designTemperature range: -20‚°F to 356‚°FNot recommended as a throttling valveFor use with water, oil and gas

Buna seals are standard in all couplersGlobal cam and groove are intended for the transfer of products such as water and sewage in non-critical applications in the agricultural and construction...

For Cam & Groove couplingsNot to be used in pressure applications for safety and environmental reasons

Buna seals are standardPressure rating for adapters is based on the seal of the mating part

Rugged steel constructionDesigned for use with C2 or 51960 band clamp tools

Supplied standard with a Buna-N gasketPrecision machined to rigid tolerancesStainless pins will not rust or bind, providing great strength and safetyRecess holds gasket firmly in place and ensures...

Designed for normal operation at 90 PSIDesigned to operate at ambient temperature 70‚°F

Pressure rating: 600 PSI WOG; 150 PSI working steam pressureForged brass bodyBlow-out proof stemsPTFE seat, seal and thrust washerChrome-plated brass ball and plated steel handle

Interchangeable with many other makesSemi-automatic pull sleeve to connectCouplers shut-off when disconnectedBrass, steel, and 303 stainless steel construction

Supplied standard with a Buna-N gasketPrecision machined to rigid tolerancesStainless pins will not rust or bind, providing great strength and safetyRecess holds gasket firmly in place and ensures...

Pressure rating: 600 PSI WOG; 150 PSI working steam pressureForged brass bodyBlow-out proof stemsPTFE seat, seal and thrust washerChrome-plated brass ball and plated steel handle

Four-piece constructionStainless steel band and housingCorrosion-resistant

For use with C2 or 51960 band clamp toolsStrapping only

Buna seals are standard in all couplersGlobal cam and groove are intended for the transfer of products such as water and sewage in non-critical applications in the agricultural and construction...

Four-piece constructionMaximum recommended torque 50 in‚·lb

The spud part of the coupling serves as one half of the Boss Ground Joint connection and is usually fixed to the equipmentThe stem part that is clamped to the hose is the other halfThe two halves are...

Used to install band clampsClamp adapter for F100 tool only

Buna seals are standardPressure rating for adapters is based on the seal of the mating part

The WS series interchanges with Snap-Tite 7500 seriesExtensively used in oil field and off shore oil rig applications

Four-piece constructionMaximum recommended torque 50 in‚·lb

Universally recommended for steam hose connectionsWidely used for air, water, fluid petroleum, chemicals and liquid petroleum gas up to 1 in IDCan be applied to many types of rubber, synthetic,...

Buna seals are standard in all couplersGlobal cam and groove are intended for the transfer of products such as water and sewage in non-critical applications in the agricultural and construction...

Pre-formed clampsCan be center punched or rolled overFor hose assemblies

Interchangeable with many other makesSemi-automatic pull sleeve to connectCouplers shut-off when disconnectedBrass, steel, and 303 stainless steel construction

Buna seals are standard in all couplersGlobal cam and groove are intended for the transfer of products such as water and sewage in non-critical applications in the agricultural and construction...

Pressure rating: 600 PSI WOG; 150 PSI working steam pressureForged brass bodyBlow-out proof stemsPTFE seat, seal and thrust washerChrome-plated brass ball and plated steel handle

Pressure rating: 600 PSI WOG; 150 PSI working steam pressureForged brass bodyBlow-out proof stemsPTFE seat, seal and thrust washerChrome-plated brass ball and plated steel handle