Chisels, Punches & Pins
-
Chisels
-
Pins
-
Planer Accessories
-
Planers
-
Punch & Chisel Parts & Accessories
-
Punch & Chisel Sets
-
Punches
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
MAYHEW TOOLS
Mayhew Tools Cold Chisels, 5 in Long, 1/4 in Cut, Black Oxide, 12 per box (1 EA / EA)
$6.78Cold chisels act to shape and cut cold metal onlyThese chisels are specially angled for strengthAvailable in a black oxide finish to deter rust479-10200$6.78 -
MAYHEW TOOLS
Mayhew Tools Center Punches, 4 in, 1/2 in tip, Alloy Steel (6 EA / BOX)
$46.12Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind479-24302$46.12 -
MAYHEW TOOLS
Mayhew Tools Pilot Punches - Series 112, 5 in, 7/32 in Tip, Alloy Steel (12 EA / BX)
$132.91This tool can drive and remove roll pins and other hollow tension pinsAvailable in many fractional and metric sizes, the proper punch exists for all pin configurations479-25006$132.91 -
MAYHEW TOOLS
Mayhew Tools Prick Punches - Full Finish, 6 in, 1/2 in Tip, Alloy Steel (12 EA / BOX)
$115.26Prick punches are used to scribe lines in metal before cutting or rivetingThe point sizes vary for different widthsThe sharp angle of the punch is specifically designed to scribe lines in metal, and the tool is covered in a black oxide finish to prevent...479-23003$115.26 -
MAYHEW TOOLS
Mayhew Tools Pilot Punches - Series 112, 3-1/2 in, 3/32 in Tip, Alloy Steel (12 EA / BOX)
$92.49This tool can drive and remove roll pins and other hollow tension pinsAvailable in many fractional and metric sizes, the proper punch exists for all pin configurations479-25002$92.49 -
MAYHEW TOOLS
Mayhew Tools Pin Punches - Full Finish, 4 in, 1/16 in tip, Alloy Steel (1 EA / EA)
$6.24Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keysExtensive sizes are available as well as a black oxide finish for rust protection479-21000$6.24 -
STANLEY
Stanley BLOCK PLANE 1-5/8"X 6" (1 EA / EA)
$73.29Grey cast iron base with side and bottom precision ground680-12-920$73.29 -
STANLEY
Stanley BLOCK PLANE 1-3/8"X 6" (1 EA / EA)
$69.01Grey cast iron base with side and bottom precision ground680-12-960$69.01 -
L.S. Starrett
L.S. Starrett Center Punches w/Square Shank Sets, Pointed, English, Round Plastic Case (1 SET / SET)
$135.98Have a square knurled grip and will not roll when laid downHardened and properly temperedTips are accurately centered and ground at the proper angle to give maximum service681-51285$135.98 -
STANLEY
Stanley Nail Set Packs, 3 Piece, Round, English (6 SET / BOX)
$56.54Hardened and temperedTips are cupped and chamferedSquare head prevents rolling680-58-230$56.54 -
STANLEY
Stanley Wood Chisels, 9 in Long, 1 1/2 in Cut (1 EA / EA)
$22.39Lacquered for corrosion protectionErgonomically designed, bi-material handle is impact-resistant680-16-324$22.39 -
STANLEY
Stanley Wood Chisels, 9 in Long, 1 1/4 in Cut (2 EA / BX)
$32.97Lacquered for corrosion protectionErgonomically designed, bi-material handle is impact-resistant680-16-320$32.97 -
MAYHEW TOOLS
Mayhew Tools Line-Up Punch - Full Finish, 12 in, 3/16 in Tip, Alloy Steel (12 EA / BOX)
$177.49Used to align holes through which rivets, pins, or bolts will be insertedNot for use when driving pins, rivets, or boltsVariable point size, shank size, and taper length for the perfect alignmentBlack oxide finish for additional rust protection479-22006$177.49 -
MAYHEW TOOLS
Mayhew Tools Pin Punches - Full Finish, 6 in, 5/16 in tip, Alloy Steel (1 EA / EA)
$8.01Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keysExtensive sizes are available as well as a black oxide finish for rust protection479-21019$8.01 -
MAYHEW TOOLS
Mayhew Tools 6 Pc Metric Pin Punch Kits, Round, Metric, Pouch (1 KIT / KIT)
$59.32Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keysExtensive sizes are available as well as a black oxide finish for rust protection479-62080$59.32 -
MAYHEW TOOLS
Mayhew Tools 6 Pc. Solid Punch Kits, Round, English, Pouch (1 KIT / KIT)
$48.92479-61340$48.92 -
MAYHEW TOOLS
Mayhew Tools Diamond Point Chisel, 7 in Long, 3/8 in Cut, 6 per box (6 EA / BOX)
$109.87Diamond point chisels are used to make a V-shaped groove in metal, where the bottom of the cut comes to a sharp pointAlternate sizes are available for cutting the proper size of grooveThis product is finished with a black oxide for rust protection479-10604$109.87 -
L.S. Starrett
L.S. Starrett Drive Pin Punch Sets, 5 Piece, Round, English, Plain Box (1 ST / ST)
$75.36Well proportioned, hardened, properly tempered, and have a knurled grip for ease of handlingSpecial tempering makes head less likely to fracture from hard, off-center blow681-51187$75.36 -
MAYHEW TOOLS
Mayhew Tools Center Punches, 4 1/2 in, 5/32 in tip, Alloy Steel (1 EA / EA)
$5.03Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind479-74001$5.03 -
MAYHEW TOOLS
Mayhew Tools Cold Chisels, 7 in Long, 3/4 in Cut, Sand Blasted, 12 per box (1 EA / EA)
$10.20Cold chisels act to shape and cut cold metal onlyThese chisels are specially angled for strengthAvailable in a black oxide finish to deter rust479-70212$10.20 -
PROTO
Proto Drive Pin Punches, 4 13/16 in, 5/64 in tip, Tool Steel (1 EA / EA)
$7.81Two-piece designHeat-treated for strength and ductilityModified parabolic striking end for resistance to mushrooming and chipping577-471/4X3/32$7.81 -
IRWIN
Irwin Flat Chisels, 12 in Long, 1 in Cut, SDS-max Spline (1 EA / EA)
$16.24For general chiseling and breaking work in brickwork, concrete and loose stone, for example when laying cablesFully heat-treated for strength and long lifeForged from superior-grade steel, the working points of our chisels can be re-sharpened for...586-332003$16.24 -
PROTO
Proto Cold Chisels, 5 9/16 in Long, 7/16 in Cut (1 EA / EA)
$8.90Hand ground cutting edgeModified parabolic striking end to help reduce mushrooming and chipping577-86A3/8$8.90 -
C.S. Osborne
C.S. Osborne Arch Punches, 2 in tip, Carbon Steel (1 EA / EA)
$281.85Inside taper permits the punchings to clear easily through the barrelPunches have fully polished barrel and black enamel handleAdditional sizes available upon request565-149-2$281.85 -
PROTO
Proto Super-Duty Cold Chisels, 8 7/16 in Long, 3/4 in Cut (1 EA / EA)
$28.41Long knurled shankLarger striking surface than standard chiselHand ground cutting edgeHardened, quenched and tempered to precise specificationsPatented design577-86034$28.41 -
PROTO
Proto 7 Pc Drive Pin Punch Set, Round, English, Pouch (1 ST / ST)
$67.79Proto 7 Pc. Drive Pin Punch SetMade from S2 steel and specially heat-treated for greater strength and durabilityTwo-piece design allows the tip to be hard for durability while allowing it to be produced straight to help prevent bindingModified parabolic...577-47A$67.79 -
L.S. Starrett
L.S. Starrett Drive Pin Punch Sets, 8 Piece, Round, English, Round Wood Box (1 SET / SET)
$102.58Well proportioned, hardened, properly tempered, and have a knurled grip for ease of handlingSpecial tempering makes head less likely to fracture from hard, off-center blow681-52586$102.58 -
MAYHEW TOOLS
Mayhew Tools Pilot Punches - Series 112, 4-1/2 in, 3/16 in Tip, Alloy Steel (12 EA / BOX)
$109.69This tool can drive and remove roll pins and other hollow tension pinsAvailable in many fractional and metric sizes, the proper punch exists for all pin configurations479-25005$109.69 -
MAYHEW TOOLS
Mayhew Tools Prick Punches - Full Finish, 4-1/2 in, 5/16 in Tip, Alloy Steel (1 EA / EA)
$6.05Prick punches are used to scribe lines in metal before cutting or rivetingThe point sizes vary for different widthsThe sharp angle of the punch is specifically designed to scribe lines in metal, and the tool is covered in a black oxide finish to prevent...479-23001$6.05 -
MAYHEW TOOLS
Mayhew Tools Cold Chisels, 7 1/2 in Long, 7/8 in Cut, Sand Blasted, 6 per box (1 EA / EA)
$13.03Cold chisels act to shape and cut cold metal onlyThese chisels are specially angled for strengthAvailable in a black oxide finish to deter rust479-70216$13.03 -
MAYHEW TOOLS
Mayhew Tools Extra Long Pin Punches - Full Finish, 8 in, 3/8 in tip, Alloy Steel (1 EA / EA)
$10.78For driving out and removing already loosened pins and keys after initial movement by a solid punchFull finish479-21504$10.78 -
MAYHEW TOOLS
Mayhew Tools Pin Punches - Full Finish, 10 in, 1/2 in tip, Alloy Steel (6 EA / BOX)
$103.10Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keysExtensive sizes are available as well as a black oxide finish for rust protection479-21401$103.10 -
MAYHEW TOOLS
Mayhew Tools Center Punch - Full Finish, 5 in, 3/16 in tip, Alloy Steel (1 EA / EA)
$6.13Used for piercing, or marking for starting drills, in metal and other materialsPoint sizes vary for larger or smaller holesAvailable in black oxide finish for additional rust protection479-24002$6.13 -
MAYHEW TOOLS
Mayhew Tools Line-Up Punch - Full Finish, 9 in, 5/32 in Tip, Alloy Steel (1 EA / EA)
$9.48Used to align holes through which rivets, pins, or bolts will be insertedNot for use when driving pins, rivets, or boltsVariable point size, shank size, and taper length for the perfect alignmentBlack oxide finish for additional rust protection479-22011$9.48 -
MAYHEW TOOLS
Mayhew Tools Line-Up Punch - Full Finish, 10 in, 3/16 in Tip, Alloy Steel (1 EA / EA)
$12.17Used to align holes through which rivets, pins, or bolts will be insertedNot for use when driving pins, rivets, or boltsVariable point size, shank size, and taper length for the perfect alignmentBlack oxide finish for additional rust protection479-22012$12.17 -
MAYHEW TOOLS
Mayhew Tools Rivet Buster, 6-1/4 in Long, 3/4 in Cut, 12 per box (12 EA / BOX)
$181.51The rivet buster is used to cut off the heads of rivetsSimple removal479-11300$181.51 -
MAYHEW TOOLS
Mayhew Tools 6 Pc. Cold Chisel Kit, Alloy Steel, English, Pouch (1 KT / KT)
$59.84Durable alloy steel constructionCorrosion-resistant black oxide finishConvenient pouch for transport and storage479-60560$59.84 -
MAYHEW TOOLS
Mayhew Tools 5 Pc Extra Long Pin Punch Kits, Round, English, Pouch (1 KIT / KIT)
$64.28Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keysExtensive sizes are available as well as a black oxide finish for rust protection479-62065$64.28 -
MAYHEW TOOLS
Mayhew Tools 5 Pc Punch Kits, Round, English, Solid Punch, Pin Punches, Pouch (1 KIT / KIT)
$39.60Solid punches are used for loosening seized or tight pins or keys, or knocking out rivetsMany sizes are available to match different sized keys and pinsUsed in conjunction with pin punchesPunches are covered with a black oxide finish to protect from...479-62020$39.60 -
MAYHEW TOOLS
Mayhew Tools Line-Up Punch - Full Finish, 15 in, 3/8 in Tip, Alloy Steel (1 EA / EA)
$28.97Used to align holes through which rivets, pins, or bolts will be insertedNot for use when driving pins, rivets, or boltsVariable point size, shank size, and taper length for the perfect alignmentBlack oxide finish for additional rust protection479-22017$28.97