Wheel Brush Parts & Accessories

For mounting brushes with a 5/8-11 UNC nut to other threaded spindlesCompatible with Right Angle Grinders

Vortec Pro Drill Accessory KitIncludes: (1) 3 in. Crimped Wire Wheel 1/4 in. Stem; 2 in. Crimped Wire Cup brush, 1/4 in. Stem; 3 in. Abrasive Flap Wheel, 80 Grit AO, 1/4 in. Stem; 3/4 in. Crimped Wire End Brush, 1/4 in. Stem

For Unmounted Flap WheelsUsed in pairs

For mounting small diameter wheels into a collet or chuckCan reach speeds of 20,000 to 25,000 RPM

Arbor Adapters for use with Vortec Pro Crimped Wire Cup BrushSturdy Metal Construction

For mounting small diameter wheels into a collet or chuckCan reach speeds of 20,000 to 25,000 RPM

For medium and wide face brushesUsed in pairs

For mounting small diameter wheels into a collet or chuckCan reach speeds of 20,000 to 25,000 RPM

For mounting brushes with a 5/8-11 UNC nut to other threaded spindlesCompatible with Right Angle Grinders

For mounting small diameter wheels into a collet or chuckCan reach speeds of 20,000 to 25,000 RPM

For medium and wide face brushesUsed in pairs

For medium and wide face brushesUsed in pairs

Plastic adapters for use with wire wheels and brushes

For mounting small diameter wheels into a collet or chuckCan reach speeds of 20,000 to 25,000 RPM

For medium and wide face brushesUsed in pairs

Plastic adapters for use with wire wheels and brushes

Plastic adapters for use with wire wheels and brushes

For medium and wide face brushesUsed in pairs

Arbor Adapters for use with Vortec Pro Crimped Wire Cup BrushSturdy Metal Construction

For mounting small diameter wheels into a collet or chuckCan reach speeds of 20,000 to 25,000 RPM

For medium and wide face brushesUsed in pairs

Plastic adapters for use with wire wheels and brushes

For Unmounted Flap WheelsUsed in pairs

For medium and wide face brushesUsed in pairs

For mounting brushes with a 5/8-11 UNC nut to other threaded spindlesCompatible with Right Angle Grinders

For medium and wide face brushesUsed in pairs

Vortec Pro Mini-Grinder KitIncludes: (1) 4-1/2 in. Flap Disc, Zirconium Grain, 60 grit, 7/8 in. AH; 3 in. Knot Wire Cup Brush, 5/8 in - 11 AH; 4 in. Standard Twist Knot Wheel, 5/8 in - 11 AH

For use with TIGER, Vortec Pro and High Density Flap DiscsCan be mounted with threaded hole

For 1 in to 3 in Type 1 wheels only1/4 in Stem

For cut-off wheels and unitized wheelsFor type 1 wheels only

For mounting small diameter wheels into a collet or chuckCan reach speeds of 20,000 to 25,000 RPM

For mounting small diameter wheels into a collet or chuckCan reach speeds of 20,000 to 25,000 RPM