WELLER

Designed for continuous production, rework, and repair solderingAutomatically powers down after 99 min of inactivityMicroprocessor controlled with digital LED displaySlim, comfortable pencil with ETA...

Pistol grip designFingertip trigger selects high (1st trigger position) or low output (2nd trigger position)Ready to use in six seconds

Tips compatible with W60P, W100PG ironsPrecision ground copper tips are plated with iron, nickel and chromiumIndividually bagged for point-of-purchase displayIMPORTANT: Use only Weller tips. Use of...

Tips compatible with Weller soldering gunsIMPORTANT: Use only Weller tips. Use of Non-Weller components may void product warranty if the non-Weller component causes damage to the unit

Sensor hole in the base of tip is fitted with a stainless steel linerPrevents the tip from seizing to the sensor

Sensor hole in the base of tip is fitted with a stainless steel linerPrevents the tip from seizing to the sensor

Tips compatible with W60P, W100PG ironsPrecision ground copper tips are plated with iron, nickel and chromiumIndividually bagged for point-of-purchase displayIMPORTANT: Use only Weller tips. Use of...

Tips compatible with Weller soldering gunsIMPORTANT: Use only Weller tips. Use of Non-Weller components may void product warranty if the non-Weller component causes damage to the unit

Designed for use with modular iron models SL325, SL335, SL345 and SL500 or Standard Series modular iron handles 7400, 7500, 7760, and 7770Temperature is determined by heater wattage and tip design

Fine quality consumer mini ironLightweight and pencil thinReplaceable nickel-plated copper tipStainless steel barrelHeat and impact resistant handle

For irons with barrel diameters up to 15/32"

Tips compatible with W60P, W100PG ironsPrecision ground copper tips are plated with iron, nickel and chromiumIndividually bagged for point-of-purchase displayIMPORTANT: Use only Weller tips. Use of...

Nickel-plated copper tips are available in a variety of stylesMTG series tips are iron plated for heavy-duty soldering ironsHanging bag for point-of-purchase display

Tips compatible with W60P, W100PG ironsPrecision ground copper tips are plated with iron, nickel and chromiumIndividually bagged for point-of-purchase displayIMPORTANT: Use only Weller tips. Use of...

Tips compatible with Weller soldering gunsIMPORTANT: Use only Weller tips. Use of Non-Weller components may void product warranty if the non-Weller component causes damage to the unit

Sensor hole in the base of tip is fitted with a stainless steel linerPrevents the tip from seizing to the sensor

Designed for use with modular iron models SL325, SL335, SL345 and SL500 or Standard Series modular iron handles 7400, 7500, 7760, and 7770Temperature is determined by heater wattage and tip design

Sensor hole in the base of tip is fitted with a stainless steel linerPrevents the tip from seizing to the sensor

No holesFits PH Series tools

Replacement heater for soldering ironEasy to install and remove

Voltage input of 120 VTime heat-up of 110 seconds

Sensor hole in the base of tip is fitted with a stainless steel linerPrevents the tip from seizing to the sensor

Designed for use with modular iron models SL325, SL335, SL345 and SL500 or Standard Series modular iron handles 7400, 7500, 7760, and 7770Temperature is determined by heater wattage and tip design

Requires new BA60 Barrel Nut Assembly if the EC234 is being used on irons manufactured prior to 2000.Voltage input of 24 V

Designed for use with modular iron models SL325, SL335, SL345 and SL500 or Standard Series modular iron handles 7400, 7500, 7760, and 7770Temperature is determined by heater wattage and tip design

Replacement sensor assembly for soldering ironPremium quality parts extend life of tool

Sensor hole in the base of tip is fitted with a stainless steel linerPrevents the tip from seizing to the sensor

Preassembled Irons are a combination of the most popular modular components, and include handle, heater, and tipHandle is 3-wire grounded with 4-1/2-ft cord and features "soft touch" acid- and...

Stainless steel constructionFor use with 6966EK heat gun

Replacement cord assembly for soldering ironPremium quality parts extend life of tool

Precision groundProvides maximum heat transfer from heater to tipIMPORTANT: Use only Weller tips. Use of non-Weller component causes damage to the unit

Replacement heating elementPreassembled irons are a combination of the most popular modular components, and include handle, heater, and tipIncludes four screws and capsHandle is 3-wire grounded with...

Line voltage high quality portable tool¢¢¬‚¦ controlled output and temperatureWeller "closed loop" method of controlling max tip temperature, protecting temperature sensitive componentsIron features...

Tips compatible with W60P, W100PG ironsPrecision ground copper tips are plated with iron, nickel and chromiumIndividually bagged for point-of-purchase displayIMPORTANT: Use only Weller tips. Use of...

Tips compatible with W60P, W100PG ironsPrecision ground copper tips are plated with iron, nickel and chromiumIndividually bagged for point-of-purchase displayIMPORTANT: Use only Weller tips. Use of...

Designed for use with Weller EC1201P, EC1204P, EC1201A, TC201T soldering ironsIncludes base, sponge and receptacle

Replacement tip for soldering pencilSensor hole in the base of tip is fitted with a stainless steel linerPrevents the tip from seizing to the sensor

Sensor hole in the base of tip is fitted with a stainless steel linerPrevents the tip from seizing to the sensor

Replacement heater for soldering ironEasy to install and remove

Lightweight and completely portableReady to use in 30 secondsSturdy metal tank holds enough gas for htree hours of operationDoes not require cords, batteries or cartridges