Tools
A tool is an implement or device used directly upon a piece of material to shape it into a desired form. Hand tool,s any of the implements used by craftspersons in manual operations, such as chopping, chiseling, sawing, filing, or forging. Complementary tools, often needed as auxiliaries to shaping tools, include such implements as the hammer for nailing and the vise for holding. A craftsperson may also use instruments that facilitate accurate measurements: the rule, divider, square, and others. Power tools—usually handheld motor-powered implements such as an electric drill or electric saw—perform many of the old manual operations and as such may be considered hand tools.
-
Clamps & Vises
-
Electrical Tools
- Tools
-
Hand Tools
-
Marking Tools
-
Measuring & Leveling Tools
-
Power Tools
-
Tool Storage
- Hand Tool Organizers & Belts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
PROTO
Proto Socket Bits, 1/4 in Drive, 5/32 in Tip (1 EA / EA)
$10.59Heat-treatedPrecision machined tip for proper screw engagement577-47705/32$10.59 -
PROTO
Proto Torx Socket Bits, 3/8 in Drive, T45 Tip (1 EA / EA)
$11.95Bit holders have a hex opening to hold the bit, allowing the bit holder to take the full load of torqueFull polish finish577-5239-45W$11.95 -
PROTO
Proto Torqueplus Protoblack Deep Sockets, 3/8 in Drive, 13/16 in, 12 Points (1 EA / EA)
$11.79Concentric openingsReduces risk of fastener roundingApplies more torque to fastenerHigh strength, thin wall designHand use only577-5026B$11.79 -
PROTO
Proto Crowfoot Wrenches, 3/8 in Dr, 2 1/8 in Opening (1 EA / EA)
$64.47Anti-Slip Design open-end (ASD) has locking grooves that help prevent the wrench from slipping off the fastener when turningCrowfoot wrenches are used in hard-to-reach, restricted access situations where a standard wrench or ratchet cannot reachFull...577-4968CF$64.47 -
PROTO
Proto WR ANGLE 1-1/4 (1 EA / EA)
$65.124 different turning anglesUnique arc design increases surface contactFor greater access in tight work areas577-3140$65.12 -
PROTO
Proto Crowfoot Wrenches, 3/8 in Dr, 16 mm Opening, Nickel Chrome (1 EA / EA)
$32.58Anti-Slip Design open-end (ASD) has locking grooves that help prevent the wrench from slipping off the fastener when turningCrowfoot wrenches are used in hard-to-reach, restricted access situations where a standard wrench or ratchet cannot reachFull...577-4916MCF$32.58 -
PROTO
Proto 2 1/2-lb Slide Hammer (1 EA / EA)
$30.16Proto Slide HammerHole Diameter (in): 5/8577-4260H$30.16 -
PROTO
Proto Ergonomics Side Cutting Needle Nose Pliers, Forged Alloy Steel, 5 9/16 in (1 EA / EA)
$29.48Plastisol grips for added comfortInduction hardened cutting edges577-229-01G$29.48 -
PROTO
Proto 6 Piece Metric Hex Bit Socket Sets, 1/2 in (1 SET / SET)
$103.72Proto 6 Piece Metric Hex Bit Socket SetFull Polish Finish577-5441-SM$103.72 -
PROTO
Proto Double Faced Sledge Hammers, 2 1/2 lb, Cushion Grip Handle, 14 in HL (1 EA / EA)
$63.87For striking metal, concrete, and stoneStrong fiberglass handle with slip-resistant cushion grip577-1433G$63.87 -
PROTO
Proto Brass Drift Punches, 8 in, 1/2 in tip, Brass (1 EA / EA)
$15.93Non-sparkingNon-marringPrevents damage to object being struck577-49920$15.93 -
PROTO
Proto Torqueplus 12-Point Combination Wrench Sets, 16 Piece, 12 Points, Inch, Satin (1 ST / ST)
$2,727.76Increased torque applied to fastener with fewer rounded edgesUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove that prevents slippage and knuckle injuryImproves grip on worn, rounded fastenersBox end is...577-1200F-HD$2,727.76 -
PROTO
Proto Torqueplus Metric Sockets 1/4 in, 1/4 in Drive, 9 mm, 6 Points (1 EA / EA)
$6.47The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-4709M$6.47 -
PROTO
Proto Crowfoot Wrenches, 1/2 in Dr, 2 1/2 in Opening (1 EA / EA)
$106.08Anti-Slip Design open-end (ASD) has locking grooves that help prevent the wrench from slipping off the fastener when turningCrowfoot wrenches are used in hard-to-reach, restricted access situations where a standard wrench or ratchet cannot reachFull...577-5380CF$106.08 -
PROTO
Proto WR COMB REV SPL 11/16 #22 (1 EA / EA)
$32.3115° angled offset box end helps keep shank clear of obstructionsAnti-Slip Design (ASD) open endBlack chrome finish is corrosion resistant and visually distinctiveLoads are kept off the corners of the fastener which helps prevent fastener...577-SCV22$32.31 -
PROTO
Proto Deep Impact Sockets 1-1/2" Drive, 1 1/2 in Drive, 4 5/8 in, 6 Points (1 EA / EA)
$1,344.66Chamfered service endsOptimized socket wall thicknessThru hole and groove accept retaining ring and pin, when securing to power tool577-15074L$1,344.66 -
PROTO
Proto Torqueplus Impact Sockets, 1/2 in Drive, 1 1/2 in Opening, 6 Points (1 EA / EA)
$28.61The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersIdeal for use on stubborn or damaged fasteners and also on fasteners made from soft...577-7448H$28.61 -
PROTO
Proto Torqueplus Metric Impact Sockets 3/4 in, 3/4 in Drive, 36 mm, 6 Points (1 EA / EA)
$28.99The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-07536M$28.99 -
PROTO
Proto Crowfoot Wrenches, 3/8 in Dr, 1 1/2 in Opening (1 EA / EA)
$47.44Anti-Slip Design open-end (ASD) has locking grooves that help prevent the wrench from slipping off the fastener when turningCrowfoot wrenches are used in hard-to-reach, restricted access situations where a standard wrench or ratchet cannot reachFull...577-4948CF$47.44 -
PROTO
Proto Torqueplus 6-Point Combination Flare Nut Wrenches, 5/8 in (1 EA / EA)
$35.87Applies more torque to fastenerIncreased torque applied to fastener with fewer rounded edgesImproves grip on worn, rounded fastenersModified square open end provides better fastener grip577-3755$35.87 -
PROTO
Proto 3/4" Drive Impact Universal Joint (1 EA / EA)
$72.88Tight tolerances for snug fit on fastenerBall and spring design which allows for a 30° working angleDesigned to withstand the high torque and force associated with impact tools in repetitive applicationFeatures two through holes and a groove to accept...577-07570A$72.88 -
PROTO
Proto WR ANGLE 15/16 (1 EA / EA)
$43.054 different turning anglesUnique arc design increases surface contactFor greater access in tight work areas577-3130$43.05 -
PROTO
Proto Torqueplus Sockets 1 in, 1 in Drive, 2 5/16 in, 12 Points (1 EA / EA)
$106.05The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-5774$106.05 -
PROTO
Proto 3/4X7/8 RATCHET OFFSET (1 EA / EA)
$35.12Full polish finish on handle provides corrosion resistance and easy to clean surfacesShorter length for access to confined workspaces12 point box end allows for fine indexing577-1185-A$35.12 -
PROTO
Proto 8 Pc. Long Folding Hex Key Sets (1 SET / SET)
$9.13Chrome plated steel case is 5-1/4-in longBlack oxide bits are 4-in long577-4991$9.13 -
PROTO
Proto TorquePlus Deep Sockets, 1/4 in Drive, 8 mm, 12 Points (1 EA / EA)
$9.42The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-4708LTM$9.42 -
PROTO
Proto 2 1/2" OD-7/8-14 UNF Reversible Adjusting Nut (1 EA / EA)
$27.77Proto Reversible Adjusting NutThread: 7/8-in -14 UNF577-4250N$27.77 -
PROTO
Proto Metric Extra Long Socket Bits, 1/2 in Drive, 12 mm Tip (1 EA / EA)
$22.78Made of heat-treated alloy steelFull Polish Finish577-5441-12MXL$22.78 -
PROTO
Proto Metric Impact Socket Bits, 3/8 in Drive, 10 mm Tip (1 EA / EA)
$14.79Heat-treatedPrecision machined tip for proper screw engagement577-7290-10M$14.79 -
PROTO
Proto Flare Nut Crowfoot Wrenches, 1/2 in Dr, 1 7/8 in Opening, 12 Pt (1 EA / EA)
$66.53Applies more torque to fastenerHigh strength, thin wall designReduces risk of fastener roundingSide lock hole577-5360FL$66.53 -
PROTO
Proto 7 Pc. Hex Bit Socket Sets, 3/8 in Drive (1 SET / SET)
$83.90Offered in a broad range of sizes for a variety of production assembly applicationsHex bit set includes socket bar and socket clipsNot for use on impact applications577-4900-7C$83.90 -
PROTO
Proto WR RAT BOX 1-1/8 X 1-1/4 (1 EA / EA)
$63.10Each wrench opening fits 2 different sizesFor servicing automotive, commercial, and residential air conditioners, refrigeration units, and freezers577-1199$63.10 -
PROTO
Proto 3/8 in Pear Head Ratchets, Premium, 11 in, Black Oxide (1 EA / EA)
$74.30Low-profile reversing lever design for quick, one hand operationTool steel drive gear for strength and durabilityKnurled slip-resistant grip577-5250XLBL$74.30 -
PROTO
Proto Socket Bits, 3/8 in Drive, 7/32 in Tip (1 EA / EA)
$11.34Heat-treatedPrecision machined tip for proper screw engagement577-49907/32$11.34 -
PROTO
Proto Nutdrivers, 11/32 in, 6 11/16 in Long (1 EA / EA)
$11.32Heat-treated shaft with hex tipColor-coded handles577-9211$11.32 -
PROTO
Proto Torqueplus 12-Point Combination Flare Nut Wrenches, 9/16 in (1 EA / EA)
$27.84Applies more torque to fastenerModified square open end provides better fastener gripUnique arc design increases surface contactIncreased torque applied to fastener with fewer rounded edgesImproves grip on worn, rounded fasteners577-3754T$27.84 -
PROTO
Proto Crowfoot Wrenches, 3/8 in Dr, 1 3/16 in Opening (1 EA / EA)
$43.53Anti-Slip Design open-end (ASD) has locking grooves that help prevent the wrench from slipping off the fastener when turningCrowfoot wrenches are used in hard-to-reach, restricted access situations where a standard wrench or ratchet cannot reachFull...577-4938CF$43.53 -
PROTO
Proto Torqueplus Metric Deep Impact Sockets 3/8 in, 3/8 in Drive, 7 mm, 6 Points (1 EA / EA)
$9.06The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-7007M$9.06 -
PROTO
Proto Torqueplus Impact Sockets, 1/2 in Drive, 1 7/16 in Opening, 6 Points (1 EA / EA)
$26.02The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersIdeal for use on stubborn or damaged fasteners and also on fasteners made from soft...577-7446H$26.02 -
PROTO
Proto Metric Hex Keys, 0.09 mm (25 EA / BAG)
$8.89Rust resistant finishSecure fastener fit577-46302$8.89