Tools
A tool is an implement or device used directly upon a piece of material to shape it into a desired form. Hand tool,s any of the implements used by craftspersons in manual operations, such as chopping, chiseling, sawing, filing, or forging. Complementary tools, often needed as auxiliaries to shaping tools, include such implements as the hammer for nailing and the vise for holding. A craftsperson may also use instruments that facilitate accurate measurements: the rule, divider, square, and others. Power tools—usually handheld motor-powered implements such as an electric drill or electric saw—perform many of the old manual operations and as such may be considered hand tools.
-
Clamps & Vises
-
Electrical Tools
- Tools
-
Hand Tools
-
Marking Tools
-
Measuring & Leveling Tools
-
Power Tools
-
Tool Storage
- Hand Tool Organizers & Belts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
PROTO
Proto 5249 Ratchet Repair Kit (1 KIT / KIT)
$19.16Male drive plugFeatures spring loaded pellet instead of a spring loaded ball577-5249RK$19.16 -
PROTO
Proto WR FLARE NUT RATCH 9/16 (1 EA / EA)
$41.28Non-reflective black oxide finish for use where non-plated products are required12 point flare nut box end allows for fine indexing, helping to improve speed and accessPivoting head allows user to place the wrench over the connected pipes to reach the...577-3818$41.28 -
PROTO
Proto Impact Socket Adapters, 1" (female square); 1 1/2" (male square) drive, 3 1/2" (1 EA / EA)
$93.12For electric- or air-powered drive toolsHeat-treated577-10004$93.12 -
PROTO
Proto Torx Socket Bits, 1/4 in Drive, T20 Tip (1 EA / EA)
$15.85Bit holders have a hex opening to hold the bit, allowing the bit holder to take the full load of torqueFull polish finish577-4739-20W$15.85 -
PROTO
Proto Torqueplus Sockets 1/2 in, 1/2 in Drive, 3/4 in, 6 Points (1 EA / EA)
$11.54The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-5424H$11.54 -
PROTO
Proto 7 Piece Hex Bit Impact Socket Set, 1/2 in Drive, 6 Points, Inch (1 ST / ST)
$127.99Made of forged steelSize stamped on tool for easy identificationSide locking hole577-74152$127.99 -
PROTO
Proto Torqueplus Metric Impact Sockets 1 in, 1 in Drive, 27 mm, 6 Points (1 EA / EA)
$37.37The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-10027M$37.37 -
PROTO
Proto Torqueplus Metric Impact Sockets 1 in, 1 in Drive, 46 mm, 6 Points (1 EA / EA)
$57.15The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-10046M$57.15 -
PROTO
Proto Long Hex Keys, 5/32 in (25 EA / BAG)
$13.14Rust resistant finishSecure fastener fit577-46210$13.14 -
PROTO
Proto Torqueplus Impact Sockets, 3/4 in Drive, 2 in Opening, 12 Points (1 EA / EA)
$51.12The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersIdeal for use on stubborn or damaged fasteners and also on fasteners made from soft...577-07532T$51.12 -
PROTO
Proto 10 Ton Proto-Ease Press-N-Pull Sets, 16 in x 22 in x 4 in (1 SET / SET)
$1,192.77Presses parts into place without hydraulicsFunctions as many different pullers either by itself or in combination with other Proto Pullers577-4293B$1,192.77 -
PROTO
Proto Torqueplus Deep Impact Sockets , 1 in Drive, 2 7/16 in Opening, 6 Points (1 EA / EA)
$185.89The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto impact sockets are ideal for use on stubborn or damaged fasteners, and also on...577-10039L$185.89 -
PROTO
Proto Spline Sockets, #5 Spline, 2 1/16 in, 6 Points (1 EA / EA)
$163.04Proto Spline tools are designed to service high tensile strength fasteners used widely on military and commercial aircraft and in heavy machinery applications where vibration is prevalentSpline sockets help tighten high strength bolts to high torque...577-09933$163.04 -
PROTO
Proto 6-Point Universal Sockets, 3/8 in Drive, 11/16 in, 6 Points (1 EA / EA)
$35.34Proto 6 Point Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materialsThe TorquePlus design is a high performance drive configuration which allows for quick and easy socket engagement to the...577-5278HA$35.34 -
PROTO
Proto Hinge Handles, 1/2 in Drive, Flex Handle, 24 in Long (1 EA / EA)
$68.77Pro-grade alloy steel with nickel-chrome finishPivoting drive head577-5469$68.77 -
PROTO
Proto TorquePlus Protoblack 12-Point Combination Wrenches, 11/16 in Opening, 10 1/8 in (1 EA / EA)
$24.81TorquePlus fastening system drives off fastener body, more easily removing damaged fastenersReduces risk of fastener roundingApplies more torque to fastenerUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove...577-1222BASD$24.81 -
PROTO
Proto Torqueplus 12-Point Combination Wrenches, Polish Finish, 3/8" Opening, 6" (1 EA / EA)
$21.44Torqueplus fastening system drives off fastener body, more easily removing damaged fastenersReduces risk of fastener roundingApplies more torque to fastenerUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove...577-1212-T500$21.44 -
PROTO
Proto Long Hex Key Sets, 13 Pc., Hex Tip, Inch (1 SET / SET)
$16.70Rust-resistant finishSecure fastener fit577-4983$16.70 -
PROTO
Proto Torqueplus Metric 6-Point Combination Wrenches, 12 mm Opening, 171.4 mm (1 EA / EA)
$20.02Torqueplus fastening system drives off fastener body, more easily removing damaged fastenersReduces risk of fastener roundingApplies more torque to fastenerUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove...577-1212MHASD$20.02 -
PROTO
Proto Torqueplus 12-Point Short Box Wrenches, 5/8" x 3/4", 6 1/8" L (1 EA / EA)
$32.80Torqueplus fastening system drives off fastener body, more easily removing damaged fastenersApplies more torque to fastenerReduces risk of fastener roundingAnti-Slip Design (ASD) wrench has a locking groove prevents slippage and knuckle injury577-1131$32.80 -
PROTO
Proto 6 Piece Torx Bit Socket Sets, 3/8 in (1 SET / SET)
$78.40Proto 6 Piece Torx Bit Socket SetFull Polish Finish577-5238C$78.40 -
PROTO
Proto 7 Piece Short Hex Bit Socket Sets, 3/8 in (1 SET / SET)
$96.17Proto 7 Piece Short Hex Bit Socket SetMade of alloy steelPolished chrome finishSet includes socket bar and socket clipsShort hex bit set for working in tight spaces577-4990-7ST$96.17 -
PROTO
Proto Torqueplus Metric Deep Impact Sockets 3/4 in, 3/4 in Drive, 43 mm, 6 Points (1 EA / EA)
$61.96The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-07543ML$61.96 -
PROTO
Proto Torqueplus 12-Point Metric Combination Wrenches, Satin, 19mm Opening, 247.6mm (1 EA / EA)
$31.78TorquePlus fastening system drives off fastener body, more easily removing damaged fastenersReduces risk of fastener roundingApplies more torque to fastenerUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove...577-1219MASD$31.78 -
PROTO
Proto Diagonal Cutting Pliers, 4 5/8 in, Diagonal (1 EA / EA)
$27.38Plastisol grips for added comfortInduction hardened cutting edges577-285G$27.38 -
PROTO
Proto Internal Retaining Ring Pliers, 9 in (1 EA / EA)
$28.70Precision formed and induction hardened fixed tipsMade for an accurate fit and long wear577-394$28.70 -
PROTO
Proto Torque MulTipliers, 1/2in;3/4 in Drive, 1200 ft lb Torque (1 EA / EA)
$2,010.53Use with torque wrenches and heavy-duty power or impact socketsTubular reaction barSingle-stage planetary gear system577-6212CERT$2,010.53 -
PROTO
Proto Super-Duty Drive Pin Punches, 5 3/4 in, 1/4 in tip, Tool Steel (1 EA / EA)
$11.16Heat-treared for strength and ductilityModified parabolic striking end for greater resistance to mushrooming and chippingFor use in extremely harsh environments577-48014$11.16 -
PROTO
Proto Torx Socket Bits, 1/4 in Drive, T15 Tip (1 EA / EA)
$15.13Bit holders have a hex opening to hold the bit, allowing the bit holder to take the full load of torqueFull polish finish577-4739-15W$15.13 -
PROTO
Proto PULLER SET STND 10 TON (1 SET / SET)
$1,167.52Required for large parts with heavy press-fitsReaches to over 12" and spread of 11"Makes over 10 different adjustable and straight jaw pullers577-4292B$1,167.52 -
PROTO
Proto TorquePlus Sockets, 2 1/2 in Drive, 2 7/8 in, 6 Points (1 EA / EA)
$876.14The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-25046$876.14 -
PROTO
Proto Torqueplus Impact Sockets 1/4 in, 1/4 in Drive, 5/16 in, 6 Points (1 EA / EA)
$7.72The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-6910H$7.72 -
PROTO
Proto Impact Sockets 1-1/2" Drive, 2 in, 6 Points (1 EA / EA)
$150.55The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersChamfered service endsHeat-treated577-15032$150.55 -
$4.37 -
PROTO
Proto Extra Long Hex Socket Bits, 3/8 in Drive, 5/16 in Tip (1 EA / EA)
$16.12Full Polish finishMade using a heat-treated alloy for wear resistance which helps minimize distortion for a long life577-49905/16XL$16.12 -
PROTO
Proto Short Socket Bits, 3/8 in Drive, 7/32 in Tip (1 EA / EA)
$13.27Made using a heat-treated alloy for wear resistance which helps minimize distortion for a long lifeHex opening holds the bit allowing the bit holder to take the torque load577-49907/32ST$13.27 -
PROTO
Proto Torqueplus Impact Sockets 1 in, 1 in Drive, 3 3/8 in, 6 Points (1 EA / EA)
$235.19The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-10054$235.19 -
PROTO
Proto Impact Sockets 3/4 in Drive, 13/16 in, 4 Points (1 EA / EA)
$33.97Chamfered service endsConcentric openingsLarge clearance holesHeat-treatedOptimized socket wall thickness577-07513SS$33.97 -
PROTO
Proto Magnetic Nut Setter Power Drive Bits, 7/16 in x 1 7/8 in (10 EA / BAG)
$92.19One-piece constructionPrecision machined and formed shank and body577-61656$92.19 -
PROTO
Proto Metric Socket Bits, 3/8 in Drive, 8 mm Tip (1 EA / EA)
$14.34Made of heat-treated alloy steelHex opening holds the bit allowing the bit holder to take the torque load577-4990-8M$14.34