Tools
A tool is an implement or device used directly upon a piece of material to shape it into a desired form. Hand tool,s any of the implements used by craftspersons in manual operations, such as chopping, chiseling, sawing, filing, or forging. Complementary tools, often needed as auxiliaries to shaping tools, include such implements as the hammer for nailing and the vise for holding. A craftsperson may also use instruments that facilitate accurate measurements: the rule, divider, square, and others. Power tools—usually handheld motor-powered implements such as an electric drill or electric saw—perform many of the old manual operations and as such may be considered hand tools.
-
Clamps & Vises
-
Electrical Tools
- Tools
-
Hand Tools
-
Marking Tools
-
Measuring & Leveling Tools
-
Power Tools
-
Tool Storage
- Hand Tool Organizers & Belts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
PROTO
Proto Foot Pound Fixed Head Torque Wrenches, 1 in, 400 ft·lb to 2000 ft·lb (1 EA / EA)
$4,685.94Weight and overall length are for torque wrench assembled with both extension handlesCalibrated to ± 3% of torque reading clockwise, 6% counterclockwise, at 20% to 100% of full scaleCertified wrenches to ±2% one direction are available upon request577-6025$4,685.94 -
PROTO
Proto Torqueplus Metric 6-Point Combination Wrenches, 7 mm Opening, 131.1 mm (1 EA / EA)
$15.82Torqueplus fastening system drives off fastener body, more easily removing damaged fastenersReduces risk of fastener roundingApplies more torque to fastenerUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove...577-1207MHA$15.82 -
PROTO
Proto Socket Bits, 1/2 in Drive, 3/4 in Tip (1 EA / EA)
$25.25Heat-treatedPrecision machined tip for proper screw engagement577-54413/4$25.25 -
PROTO
Proto Torqueplus 21 Piece Metric Socket Sets, 3/8 in, 12 Point (1 SET / SET)
$157.76Reduce risk of fastener roundingSockets apply more torque to fastener577-52215$157.76 -
PROTO
Proto Adjustable Jaw Puller, 2 Way, 8 in, 6 tons, Wheel Hub (1 SET / SET)
$251.23Used to pull gears off a hubPullers can get a grip without damaging the case-hardened gear teeth577-4217$251.23 -
PROTO
Proto Socket Bits, 1/4 in Drive, 1/8 in Tip (1 EA / EA)
$11.07Heat-treatedPrecision machined tip for proper screw engagement577-47701/8$11.07 -
PROTO
Proto Inch Pound/Centimeter Kilogram Dial Torque Wrenches, 3/8 in, 384 N-M (1 EA / EA)
$279.26Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scaleTorsion drive design--accuracy not effected by hand positionDual scale (English/metric) with clockwise and counterclockwise operation--fewer wrenches needed to complete...577-6181F$279.26 -
PROTO
Proto Drive Pin Punches, 6 3/4 in, 1/4 in Tip, Tool Steel (1 EA / EA)
$10.03Two-piece designHeat-treated for strength and ductilityModified parabolic striking end for resistance to mushrooming and chipping577-471/2X1/4$10.03 -
PROTO
Proto Torqueplus Metric Sockets 1/4 in, 1/4 in Drive, 11 mm, 6 Points (1 EA / EA)
$6.47The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-4711M$6.47 -
PROTO
Proto Torqueplus Metric Deep Sockets 1/2 in, 1/2 in Drive, 25 mm, 12 Points (1 EA / EA)
$20.13The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-5325M$20.13 -
PROTO
Proto ProtoGrip Hi Strength Magnetic Impact Sockets, 3/8 in Dr, 8 mm, 6 Pt (1 EA / EA)
$13.74Allows room for more magnet material, helping increase total magnetic strengthDesigned to easily pick up heavy fasteners and hold them tightly during useImpact sockets with high-impact strength are used in automated and hand impact socket...577-7208MHF$13.74 -
PROTO
Proto Phillips Screwdriver Bits, 1/2 in Drive, #2 Tip (1 EA / EA)
$18.71Bit holders have a hex opening to hold the bit allowing the bit holder to take the full load of torqueMade of heat-treated alloy steelPolished chrome finish577-5402$18.71 -
PROTO
Proto Extra Long Hex Socket Bits, 3/8 in Drive, 5/32 in Tip (1 EA / EA)
$12.53Full Polish finishMade using a heat-treated alloy for wear resistance which helps minimize distortion for a long life577-49905/32XL$12.53 -
PROTO
Proto Torqueplus Sockets 3/8 in, 3/8 in Drive, 1 in, 6 Points (1 EA / EA)
$10.18The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-5232H$10.18 -
PROTO
Proto Torqueplus Sockets 1/2 in, 1/2 in Drive, 5/16 in, 12 Points (1 EA / EA)
$8.69The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-5410$8.69 -
PROTO
Proto Vinyl Tool Kit Pouches, 7 Compartments, Red, Vinyl (1 EA / EA)
$11.32Red canvasStitched and reinforced edges for strengthReinforced pocketsTie strap closure577-25TR03C$11.32 -
PROTO
Proto Heavy-Duty Pipe Wrenches, 3 1/2 in Opening, 18 in OAL (1 EA / EA)
$73.71Jaw provides maximum strengthInstant grip, easy-release full floating hook jawLarge knurl and power threads for positive jaw adjustment577-818HD$73.71 -
PROTO
Proto Torqueplus Metric Deep Impact Sockets 1/2 in, 1/2 in Drive, 25 mm, 6 Points (1 EA / EA)
$21.42The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-7325M$21.42 -
PROTO
Proto Deep Impact Sockets 1-1/2" Drive, 1 1/2 in Drive, 2 5/16 in, 6 Points (1 EA / EA)
$205.24Chamfered service endsOptimized socket wall thicknessThru hole and groove accept retaining ring and pin, when securing to power tool577-15037L$205.24 -
PROTO
Proto Torqueplus 6-Point Combination Flare Nut Wrenches, 9/16 in (1 EA / EA)
$30.81Applies more torque to fastenerIncreased torque applied to fastener with fewer rounded edgesImproves grip on worn, rounded fastenersModified square open end provides better fastener grip577-3754$30.81 -
PROTO
Proto Torqueplus Impact Sockets 3/8 in, 3/8" Dr, 5/16 in, 6 Pt (1 EA / EA)
$6.24The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-7210H$6.24 -
PROTO
Proto ProtoGrip Hi Strength Magnetic Impact Sockets, 3/8 in Dr, 13 mm, 6 Pt (1 EA / EA)
$15.55Allows room for more magnet material, helping increase total magnetic strengthDesigned to easily pick up heavy fasteners and hold them tightly during useImpact sockets with high-impact strength are used in automated and hand impact socket...577-7213MHF$15.55 -
PROTO
Proto Wobble Extensions, 3/8 in drive, 8 in (1 EA / EA)
$20.08Provides up to a 17° angle of operationSocket can be pushed past the detent ball for straight driving577-5261W$20.08 -
PROTO
Proto Torqueplus 12-Point Combination Wrenches - Satin Finish, 11/16" Opening, 8 1/2" (1 EA / EA)
$22.65Torqueplus fastening system drives off fastener body, more easily removing damaged fastenersReduces risk of fastener roundingApplies more torque to fastenerUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove...577-1222ASD$22.65 -
PROTO
Proto Torqueplus Metric 6-Point Double End Flare Nut Wrenches, 10 mm; 12 mm (1 EA / EA)
$29.98Applies more torque to fastenerIncreased torque applied to fastener with fewer rounded edgesImproves grip on worn, rounded fastenersModified square open end provides better fastener grip577-3710M$29.98 -
PROTO
Proto Foot Pound/Meter Kilogram Dial Torque Wrenches, 3/8 in, 50 ft lb (1 EA / EA)
$268.53Memory needle pinpoints peak torqueEasy to read dialsWithstands up to 20% accidental overload without losing calibrationDual scales577-6113F$268.53 -
PROTO
Proto TorquePlus Super Short Sockets, 3/8 in Drive, 11/16 in, 6 Points (1 EA / EA)
$8.86The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto 6 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-5222HS$8.86 -
PROTO
Proto Torqueplus Sockets 1/4 in, 1/4 in Drive, 7/32 in, 6 Points (1 EA / EA)
$5.69The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-4707$5.69 -
PROTO
Proto SKT BAR 9 W/10 CLIPS 3/8 (1 SET / SET)
$2.69Proto Socket BarAll clips fit all bars577-2572$2.69 -
PROTO
Proto Torqueplus Metric Impact Sockets 1/2 in, 1/2 in Drive, 16 mm, 6 Points (1 EA / EA)
$8.32The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-7416M$8.32 -
PROTO
Proto Hex Keys, 5/32 in (25 EA / BAG)
$7.56Rust resistant finishSecure fastener fit577-46110$7.56 -
PROTO
Proto Hex Keys, 3/16 in (25 EA / BAG)
$10.36Rust resistant finishSecure fastener fit577-46112$10.36 -
PROTO
Proto Deep Impact Sockets 1-1/2" Drive, 1 1/2 in Drive, 1 3/4 in, 6 Points (1 EA / EA)
$170.15Chamfered service endsOptimized socket wall thicknessThru hole and groove accept retaining ring and pin, when securing to power tool577-15028L$170.15 -
PROTO
Proto Pear Head Ratchet, Premium, 3/8 in Dr, 8-1/2 in L, Full Polish (1 EA / EA)
$69.18Low-profile reversing lever design for quick, one hand operationTool steel drive gear for strength and durabilityKnurled slip-resistant grip577-5249XL$69.18 -
PROTO
Proto Torqueplus Impact Sockets 1/4 in, 1/4 in Drive, 3/16 in, 6 Points (1 EA / EA)
$6.34The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-6906H$6.34 -
PROTO
Proto Torqueplus Impact Sockets 1 in, 1 in Drive, 1 15/16 in, 6 Points (1 EA / EA)
$57.53The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-10031$57.53 -
PROTO
Proto Wrench, Ratcheting Box 7 mm x 8 mm (1 EA / EA)
$14.84Full polish finish provides corrosion resistance and easy to clean surfacesBuilt in retaining ring in each ratchet wheel adds speed and convenience for greater accessibilityShorter length for access to confined workspacesThe wrench self-aligns with the...577-1191M-A$14.84 -
PROTO
Proto Screwdriver Socket Bits, 1/4 in Drive, 3/16 in, 1 7/8 in L (1 EA / EA)
$14.46Bit holders have a hex opening to hold the bit, allowing the bit holder to take the full load of torqueFull polish finish577-4744$14.46 -
PROTO
Proto Torqueplus Metric Deep Sockets 3/8 in, 3/8 in Drive, 9 mm, 12 Points (1 EA / EA)
$8.72The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-5009M$8.72