Tools
A tool is an implement or device used directly upon a piece of material to shape it into a desired form. Hand tool,s any of the implements used by craftspersons in manual operations, such as chopping, chiseling, sawing, filing, or forging. Complementary tools, often needed as auxiliaries to shaping tools, include such implements as the hammer for nailing and the vise for holding. A craftsperson may also use instruments that facilitate accurate measurements: the rule, divider, square, and others. Power tools—usually handheld motor-powered implements such as an electric drill or electric saw—perform many of the old manual operations and as such may be considered hand tools.
-
Clamps & Vises
-
Electrical Tools
- Tools
-
Hand Tools
-
Marking Tools
-
Measuring & Leveling Tools
-
Power Tools
-
Tool Storage
- Hand Tool Organizers & Belts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
PROTO
Proto Crowfoot Wrenches, 3/8 in Dr, 12 mm Opening (1 EA / EA)
$28.77Anti-Slip Design open-end (ASD) has locking grooves that help prevent the wrench from slipping off the fastener when turningCrowfoot wrenches are used in hard-to-reach, restricted access situations where a standard wrench or ratchet cannot reachFull...577-4912MCF$28.77 -
PROTO
Proto Deep Impact Sockets 1-1/2" Drive, 1 1/2 in Drive, 2 7/8 in, 6 Points (1 EA / EA)
$358.03Chamfered service endsOptimized socket wall thicknessThru hole and groove accept retaining ring and pin, when securing to power tool577-15046L$358.03 -
PROTO
Proto TorquePlus Protoblack 12-Point Combination Wrenches, 1 5/16 in Opening, 17 5/8in (1 EA / EA)
$68.97TorquePlus fastening system drives off fastener body, more easily removing damaged fastenersReduces risk of fastener roundingApplies more torque to fastenerUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove...577-1242B$68.97 -
PROTO
Proto Square Drive Extensions, 3/4 in drive, 8 in (1 EA / EA)
$83.68Extensions help provide access to fasteners in areas that might otherwise be difficult to reachFull polish finish577-5861$83.68 -
PROTO
Proto Long Hex Keys, 3/16 in (25 EA / BAG)
$13.83Rust resistant finishSecure fastener fit577-46212$13.83 -
PROTO
Proto Torque Multipliers, 8 17/32 in, 227 ft lb-750 ft lb (1 EA / EA)
$781.05Use with torque wrenches and heavy-duty power or impact socketsTubular reaction barSingle-stage planetary gear system577-6202A$781.05 -
PROTO
Proto Torqueplus Metric Impact Sockets 3/4 in, 3/4 in Drive, 27 mm, 6 Points (1 EA / EA)
$22.29The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-07527M$22.29 -
PROTO
Proto Torqueplus Sockets 1/2 in, 1/2 in Drive, 1 1/16 in, 12 Points (1 EA / EA)
$13.77The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-5434$13.77 -
PROTO
Proto Torqueplus Sockets, 3/4 in Drive, 1 in Opening, 12 Points (1 EA / EA)
$22.51The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-5532$22.51 -
PROTO
Proto Heavy-Duty Offset Striking Wrenches, 13 1/2 in, 2 5/16 in Opening (1 EA / EA)
$151.02Large striking surfaceHeavy box walls provide torque transmissionShort handle permits work in close quartersOffset provides clearance for knuckles and obstructionsBox opening remains on fastener when wrench is struck577-2637SW$151.02 -
PROTO
Proto Deep Impact Sockets 1-1/2" Drive, 1 1/2 in Drive, 3 9/16 in, 6 Points (1 EA / EA)
$534.01Chamfered service endsOptimized socket wall thicknessThru hole and groove accept retaining ring and pin, when securing to power tool577-15057L$534.01 -
PROTO
Proto Retaining Rings, 1 in Drive, 2.71 in Dia., Resin (10 EA / PK)
$71.99Helps secure sockets onto drive toolsOne-piece construction, no loose parts577-RR10040$71.99 -
PROTO
Proto Square Drive Extensions, 1/2 in drive, 5 in (1 EA / EA)
$16.54Extensions help provide access to fasteners in areas that might otherwise be difficult to reachFull polish finish577-5461$16.54 -
PROTO
Proto Torqueplus Deep Impact Sockets 1/2 in, 1/2 in Drive, 3/4 in, 8 Points (1 EA / EA)
$19.62The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-7324S$19.62 -
PROTO
Proto Torque Wrench Ratchet Repair Kits, 1/2 in Dr., For 6014/6014M/6068/6072 (1 KIT / KIT)
$17.47Ratchet wheels made from alloy steel for uncompromising strength and durabilityField repair your torque wrench ratchet head easily with the corresponding repair kit577-6014RK$17.47 -
PROTO
Proto Power Track ll Ergonomics Tongue and Groove Pliers, 4 5/8 in, Straight (1 EA / EA)
$19.23Precision milled undercut groove jointPlastisol grips for added comfortEasily adjustsForged undercut577-261SG$19.23 -
PROTO
Proto Torqueplus Deep Impact Sockets 1/4 in, 1/4 in Drive, 9/32 in, 6 Points (1 EA / EA)
$2.27The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-6509H$2.27 -
PROTO
Proto 164 Pc Starter Sets (1 SET / SET)
$3,371.43Assortment of sockets, wrenches, and other toolsPerfect for the professional or apprentice577-99700$3,371.43 -
PROTO
Proto BIT INSERT T27 TORX T PR (25 BIT / BAG)
$103.95Precision machined tip for proper screw engagement577-60538$103.95 -
PROTO
Proto Torqueplus Protoblack Deep Sockets, 1/2 in Drive, 1 1/4 in, 12 Points (1 EA / EA)
$24.92Concentric openingsReduces risk of fastener roundingApplies more torque to fastenerHigh strength, thin wall designHand use only577-5340B$24.92 -
PROTO
Proto Torqueplus 12-Point Double End Flare Nut Wrenches, 5/8 in; 11/16 in (1 EA / EA)
$34.27Applies more torque to fastenerIncreased torque applied to fastener with fewer rounded edgesImproves grip on worn, rounded fastenersModified square open end provides better fastener grip577-3772T$34.27 -
PROTO
Proto Torx Socket Bits, 3/8 in Drive, T20 Tip (1 EA / EA)
$11.99Bit holders have a hex opening to hold the bit, allowing the bit holder to take the full load of torqueFull polish finish577-5239-20W$11.99 -
PROTO
Proto Torqueplus Deep Impact Sockets 1/2 in, 1/2 in Drive, 1 9/16 in, 6 Points (1 EA / EA)
$44.88The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-7350H$44.88 -
PROTO
Proto Spline Non-Reversing Combination Wrenches, 13/16 in Opening, 11 7/16 in (1 EA / EA)
$27.88Fractional spline wrenches can be used on fractional 4, 6, 12 point, spline and Torx fastenersBox end is countersunk for easy application to the fastenerSpline design was created for use with specialty spline bolts which are used when weight and size of...577-SCR26$27.88 -
PROTO
Proto Square Drive Adapters, 1/2" (female square); 3/4" (male square) drive, 1 19/32" (1 EA / EA)
$13.86Proto Square Drive AdapterFull Polish finish577-5653$13.86 -
PROTO
Proto 98 Pc Starter Maintenance Sets (1 SET / SET)
$1,540.0433 - Sockets and Accessories21 - Wrenches13 - Striking and Struck Tools5 - Pliers12 - Screwdrivers14 - Miscellaneous Tools98 pieces3/8-in drive toolsDesigned for fastener sizes 1/4-in - 1-1/4-in577-99480$1,540.04 -
PROTO
Proto TorquePlus Super Short Sockets, 3/8 in Drive, 5/16 in, 6 Points (1 EA / EA)
$7.72The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto 6 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-5210HS$7.72 -
PROTO
Proto Deep Impact Sockets 1-1/2" Drive, 1 1/2 in Drive, 4 1/4 in, 6 Points (1 EA / EA)
$920.47Chamfered service endsOptimized socket wall thicknessThru hole and groove accept retaining ring and pin, when securing to power tool577-15068L$920.47 -
PROTO
Proto Torqueplus 12-Point Combination Wrenches - Satin Finish, 5/8 in Opening, 8 in (1 EA / EA)
$20.70Torqueplus fastening system drives off fastener body, more easily removing damaged fastenersReduces risk of fastener roundingApplies more torque to fastenerUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove...577-1220ASD$20.70 -
PROTO
Proto Torqueplus Protoblack Metric 12-Pt Combination Wrenches, 20mm Opening, 290.2mm (1 EA / EA)
$25.24Torqueplus fastening system drives off fastener body, more easily removing damaged fastenersReduces risk of fastener roundingApplies more torque to fastenerUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove...577-1220MBASD$25.24 -
PROTO
Proto Deep Impact Sockets 1-1/2" Drive, 1 1/2 in Drive, 3 13/16 in, 6 Points (1 EA / EA)
$666.91Chamfered service endsOptimized socket wall thicknessThru hole and groove accept retaining ring and pin, when securing to power tool577-15061L$666.91 -
PROTO
Proto Torqueplus Sockets 3/8 in, 3/8 in Drive, 3/16 in, 6 Points (1 EA / EA)
$6.14The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-5206H$6.14 -
PROTO
Proto Torqueplus Protoblack Deep Sockets, 3/8 in Drive, 9/16 in, 12 Points (1 EA / EA)
$9.37Concentric openingsReduces risk of fastener roundingApplies more torque to fastenerHigh strength, thin wall designHand use only577-5018B$9.37 -
PROTO
Proto Protoblack Hinge Handles, 3/8 in Drive, Flex Handle, 8 1/2 in Long (1 EA / EA)
$31.75Black Oxide finishHead Flexes 90° from horizontalMade of heat-treated alloy steel577-5265BL$31.75 -
PROTO
Proto Torqueplus 12-Point Combination Wrenches - Satin Finish, 3/8 in Opening, 6 in (1 EA / EA)
$15.18Torqueplus fastening system drives off fastener body, more easily removing damaged fastenersReduces risk of fastener roundingApplies more torque to fastenerUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove...577-1212ASD$15.18 -
PROTO
Proto Hex Keys, 9/64 in (25 EA / BAG)
$8.02Rust resistant finishSecure fastener fit577-46109$8.02 -
PROTO
Proto Super Heavy-Duty Metric Offset Slugging Wrenches, 441 mm, 85 mm Opening (1 EA / EA)
$407.35Heavy box walls provide greater torque transmissionBox opening remains on fastener when wrench is struckHigh strength rectangular design withstands heavy sledgingStraight handle resists springing for easier nut turningFor close quarter work where hammer...577-HD085M$407.35 -
PROTO
Proto Impact Sockets 1-1/2" Drive, 3 7/16 in, 6 Points (1 EA / EA)
$337.62The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersChamfered service endsHeat-treated577-15055$337.62 -
PROTO
Proto Internal Retaining Ring Pliers, 5 3/8 in (1 EA / EA)
$16.47Precision formed and induction hardened fixed tipsMade for an accurate fit and long wear577-390$16.47 -
PROTO
Proto Torqueplus Protoblack Sockets, 1/2 in Drive, 1/2 in, 12 Points (1 EA / EA)
$8.07Concentric openingsReduces risk of fastener roundingApplies more torque to fastenerHigh strength, thin wall designHand use only577-5416B$8.07