Tools
A tool is an implement or device used directly upon a piece of material to shape it into a desired form. Hand tool,s any of the implements used by craftspersons in manual operations, such as chopping, chiseling, sawing, filing, or forging. Complementary tools, often needed as auxiliaries to shaping tools, include such implements as the hammer for nailing and the vise for holding. A craftsperson may also use instruments that facilitate accurate measurements: the rule, divider, square, and others. Power tools—usually handheld motor-powered implements such as an electric drill or electric saw—perform many of the old manual operations and as such may be considered hand tools.
-
Clamps & Vises
-
Electrical Tools
- Tools
-
Hand Tools
-
Marking Tools
-
Measuring & Leveling Tools
-
Power Tools
-
Tool Storage
- Hand Tool Organizers & Belts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
PROTO
Proto Torqueplus Flex Head Wrench Sets, 7 Piece with Roll, Inch, 12 Point (1 SET / SET)
$279.51Increased torque applied to fastener with fewer rounded edgesUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove that prevents slippage and knuckle injury577-1270A$279.51 -
PROTO
Proto WR RAT BOX 16MM X 18MM 1 (1 EA / EA)
$27.23Full polish finish provides corrosion resistance and easy to clean surfacesBuilt in retaining ring in each ratchet wheel adds speed and convenience for greater accessibilityShorter length for access to confined workspaces12 point box end allows for fine...577-1196M$27.23 -
PROTO
Proto Long Hex Keys, 7/16 in (5 EA / BAG)
$34.34Rust resistant finishSecure fastener fit577-46228$34.34 -
PROTO
Proto Torqueplus Deep Sockets 1/4 in, 1/4 in Drive, 7/32 in, 6 Points (1 EA / EA)
$9.82The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-4707L$9.82 -
PROTO
Proto Deep Impact Sockets 1-1/2" Drive, 1 1/2 in Drive, 1 11/16 in, 6 Points (1 EA / EA)
$195.60Chamfered service endsOptimized socket wall thicknessThru hole and groove accept retaining ring and pin, when securing to power tool577-15027L$195.60 -
PROTO
Proto Deep Impact Sockets 1-1/2" Drive, 1 1/2 in Drive, 4 1/2 in, 6 Points (1 EA / EA)
$1,313.17Chamfered service endsOptimized socket wall thicknessThru hole and groove accept retaining ring and pin, when securing to power tool577-15072L$1,313.17 -
PROTO
Proto Torqueplus Impact Sockets 1/4 in, 1/4 in Drive, 5/8 in, 6 Points (1 EA / EA)
$7.32The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-6920H$7.32 -
PROTO
Proto Torqueplus Metric Sockets 3/8 in, 3/8 in Drive, 23 mm, 12 Points (1 EA / EA)
$9.48The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-5223M$9.48 -
PROTO
Proto Impact Socket Bits, 1/2 in Drive, 3/8 in Tip (1 EA / EA)
$18.64Heat-treatedPrecision machined tip for proper screw engagementThru hole and groove accept retaining ring and pin, when securing to power tool577-74413/8$18.64 -
PROTO
Proto Torqueplus 10 Piece Socket Sets, 3/8 in, 6 Point (1 SET / SET)
$81.82Reduced risk of fastener roundingSockets apply more torque to fastener577-52122$81.82 -
PROTO
Proto Offset Head Aviation Snips, Curved Handle, Cuts Right (1 EA / EA)
$31.27Compound leverage multiplies handle pressureIncreased control for intricate cuttingOffset handle keeps hands above working areaColor coded identification577-303RS$31.27 -
PROTO
Proto Torqueplus Metric Sockets 3/8 in, 3/8 in Drive, 20 mm, 6 Points (1 EA / EA)
$9.34The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-5220MH$9.34 -
PROTO
Proto 6" Reach Reversible Jaw (1 EA / EA)
$26.63Adjustable reversible jaw4 1/2 in reach577-4056-6$26.63 -
PROTO
Proto Metric Hex Keys, 2 mm (25 EA / BAG)
$8.80Rust resistant finishSecure fastener fit577-46308$8.80 -
PROTO
Proto Nutdriver Sets, 3/16 in; 7/32 in; 1/4 in; 9/32 in; 5/16 in; 11/32 in; 3/8 in (1 SET / SET)
$83.14Large, comfortable fluted handlesPrecision formed hex openingsColor coded identification577-9200C$83.14 -
PROTO
Proto Long Hex Keys, 5/16 in (5 EA / BAG)
$11.42Rust resistant finishSecure fastener fit577-46220$11.42 -
PROTO
Proto Torqueplus Impact Sockets 1 in, 1 in Drive, 2 1/2 in, 6 Points (1 EA / EA)
$135.81The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-10040$135.81 -
PROTO
Proto Torqueplus Deep Sockets 3/8 in, 3/8 in Drive, 3/4 in, 12 Points (1 EA / EA)
$13.63The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-5024$13.63 -
PROTO
Proto Square Drive Extensions, 3/8 in drive, 17 3/16 in (1 EA / EA)
$30.30Extensions help provide access to fasteners in areas that might otherwise be difficult to reachFull polish finish577-5263$30.30 -
PROTO
Proto Socket Bits, 3/8 in Drive, 5/16 in Tip (1 EA / EA)
$13.76Heat-treatedPrecision machined tip for proper screw engagement577-49905/16$13.76 -
PROTO
Proto Open End Wrenches, 5/8 in; 3/4 in Opening, 8 9/16 in Long, Chrome (1 EA / EA)
$23.11Increased torque applied to fastener with fewer rounded edgesUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove preventing slippage and knuckle injury577-3031$23.11 -
PROTO
Proto Metric Socket Bits, 1/2 in Drive, 12 mm Tip (1 EA / EA)
$21.26Made of heat-treated alloy steelHex opening holds the bit allowing the bit holder to take the torque load577-5441-12M$21.26 -
PROTO
Proto Torqueplus Deep Sockets 3/4 in, 3/4 in Drive, 1 3/8 in, 6 Points (1 EA / EA)
$48.29The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners...577-5544HL$48.29 -
PROTO
Proto Deep Impact Sockets 1-1/2" Drive, 1 1/2 in Drive, 3 11/16 in, 6 Points (1 EA / EA)
$766.64Chamfered service endsOptimized socket wall thicknessThru hole and groove accept retaining ring and pin, when securing to power tool577-15059L$766.64 -
PROTO
Proto Torqueplus Impact Sockets, 1/2 in Drive, 3/4 in Opening, 6 Points (1 EA / EA)
$10.19The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersIdeal for use on stubborn or damaged fasteners and also on fasteners made from soft...577-7424H$10.19 -
PROTO
Proto PULLER STEP PLATE 1-3/8 (1 EA / EA)
$8.34Provides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore577-4040-6$8.34 -
PROTO
Proto Torqueplus Metric Impact Sockets 1/4 in, 1/4 in Drive, 9 mm, 6 Points (1 EA / EA)
$4.63The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto Impact Sockets are ideal for use on stubborn or damaged fasteners, and also on...577-6909M$4.63 -
PROTO
Proto Impact Socket Adapters, 1 1/2" (female square); 1" (male square) drive, 4 3/16" (1 EA / EA)
$193.47For electric- or air-powered drive toolsHeat-treated577-15007$193.47 -
PROTO
Proto Torqueplus Deep Impact Sockets, 3/4 in Drive, 3/4 in Opening, 6 Points (1 EA / EA)
$29.95The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersProto impact sockets are ideal for use on stubborn or damaged fasteners, and also on...577-07512L$29.95 -
PROTO
Proto Torqueplus Impact Sockets, 3/4 in Drive, 11/16 in Opening, 6 Points (1 EA / EA)
$22.13The TorquePlus internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded, or rusted fastenersIdeal for use on stubborn or damaged fasteners and also on fasteners made from soft...577-07511$22.13 -
PROTO
Proto Double Faced Sledge Hammer, 3 lb, Cushion Grip Handle, 14" (1 EA / EA)
$60.57For striking metal, concrete, and stoneStrong fiberglass handle with slip-resistant cushion grip577-1434G$60.57 -
PROTO
Proto SET FEELER GA METRIC 15 (1 ST / ST)
$13.891/2-in x 3-in metric blades in steel holderSizes: 0.06mm, 0.07mm, 0.08mm, 0.10mm, 0.15mm, 0.20mm, 0.25mm, 0.30mm, 0.35mm, 0.40mm, 0.45mm, 0.50mm, 0.55mm, 0.60mm, 0.70mm577-00MM15$13.89 -
PROTO
Proto Metric Extra Long Socket Bits, 1/2 in Drive, 17 mm Tip (1 EA / EA)
$27.35Made of heat-treated alloy steelFull Polish Finish577-5441-17MXL$27.35 -
PROTO
Proto SET TORX KEY 10 PC (1 SET / SET)
$68.76Rust resistant finishSecure fastener fitHeat-treated577-4961$68.76 -
PROTO
Proto Metric Socket Bits, 1/2 in Drive, 14 mm Tip (1 EA / EA)
$23.19Made of heat-treated alloy steelHex opening holds the bit allowing the bit holder to take the torque load577-5441-14M$23.19 -
$7.28 -
PROTO
Proto Crowfoot Wrenches, 3/8 in Dr, 1 3/8 in Opening (1 EA / EA)
$58.92Anti-Slip Design open-end (ASD) has locking grooves that help prevent the wrench from slipping off the fastener when turningCrowfoot wrenches are used in hard-to-reach, restricted access situations where a standard wrench or ratchet cannot reachFull...577-4944CF$58.92 -
PROTO
Proto 25 Blade Feeler Gauge Set, 0.0015 in to 0.040 in Thickness, Inch/Metric, 1/2 in x 3 in (1 ST / ST)
$17.71Contains twenty-five short blades in holderShort blades etched with both decimal size and metric equivalentIncludes all blade sizes in between except .019"577-000AA$17.71 -
PROTO
Proto 9 Piece Torqueplus Metric Combination Wrench Sets, 12 Points, 10-19mm, Polish (1 SET / SET)
$206.87Increased torque applied to fastener with fewer rounded edgesUnique arc design increases surface contactAnti-Slip Design (ASD) wrench has a locking groove that prevents slippage and knuckle injury577-1200HM-T500$206.87 -
PROTO
Proto Sockets 1/2" Drive, 1/2 in Drive, 13/16 in, 8 Points (1 EA / EA)
$17.22For square nuts577-5426S$17.22