Tools
A tool is an implement or device used directly upon a piece of material to shape it into a desired form. Hand tool,s any of the implements used by craftspersons in manual operations, such as chopping, chiseling, sawing, filing, or forging. Complementary tools, often needed as auxiliaries to shaping tools, include such implements as the hammer for nailing and the vise for holding. A craftsperson may also use instruments that facilitate accurate measurements: the rule, divider, square, and others. Power tools—usually handheld motor-powered implements such as an electric drill or electric saw—perform many of the old manual operations and as such may be considered hand tools.
-
Clamps & Vises
-
Electrical Tools
- Tools
-
Hand Tools
-
Marking Tools
-
Measuring & Leveling Tools
-
Power Tools
-
Tool Storage
- Hand Tool Organizers & Belts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
GEARWRENCH
GEARWRENCH Center Punches, 5 in, 5/32 in Tip, Alloy Steel (1 EA / EA)
$8.88Softened and tapered striking end reduces potential to chipGround surface for ease of identificationPrecision Harded working endsUsed for marking center lines and pilot drill locations329-82270$8.88 -
GEARWRENCH
GEARWRENCH Center Punches, 4 1/4 in Long, 15/16 in Tip, Alloy Steel (1 EA / EA)
$8.88Softened and tapered striking end reduces potential to chipGround surface for ease of identificationPrecision Harded working endsUsed for marking center lines and pilot drill locations329-82269$8.88 -
Klein Tools
Klein Tools Center Punches, 5 in, 3/8 in tip, Carbon Steel (1 EA / EA)
$12.54Heat-treatedSmooth ground points409-66312$12.54 -
Ampco Safety Tools
Ampco Safety Tools Center Punches, 6 in, 5/8 in tip, Aluminum Bronze (1 EA / EA)
$51.48Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free065-P-1293$51.48 -
Ampco Safety Tools
Ampco Safety Tools Center Punches, 5 in, 1/2 in tip, Aluminum Bronze (1 EA / EA)
$36.77Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free065-P-1292$36.77 -
Ampco Safety Tools
Ampco Safety Tools Center Punches, 4 1/2 in, 3/8 in tip, Aluminum Bronze (1 EA / EA)
$24.54Non-SparkingNon-MagneticCorrosion-resistantMade in the USABeryllium-free065-P-1291$24.54 -
MAYHEW TOOLS
Mayhew Tools Center Punches - Full Finish, 4 1/2 in, 5/32 in tip, Alloy Steel (1 EA / EA)
$5.40Used for piercing, or marking for starting drills, in metal and other materialsPoint sizes vary for larger or smaller holesAvailable in black oxide finish for additional rust protection479-24001$5.40 -
Klein Tools
Klein Tools Center Punches, 4 1/4 in, 1/4 in tip, Carbon Steel (1 EA / EA)
$11.12Heat-treatedSmooth ground points409-66310$11.12 -
PROTO
Proto Center Punches, 4 7/8 in, Tool Steel (1 EA / EA)
$8.96Modified parabolic striking end for resistance to mushrooming and chippingFor metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points577-413/8$8.96 -
Klein Tools
Klein Tools Center Punches, 4 1/2 in, 5/16 in tip, Carbon Steel (1 EA / EA)
$11.75Heat-treatedSmooth ground points409-66311$11.75 -
PROTO
Proto Center Punches, 5 5/8 in, Tool Steel (1 EA / EA)
$9.63Modified parabolic striking end for resistance to mushrooming and chippingFor metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points577-411/2$9.63 -
Klein Tools
Klein Tools Center Punches, 6 in, 1/2 in tip, Carbon Steel (1 EA / EA)
$13.15Heat-treatedSmooth ground points409-66313$13.15 -
PROTO
Proto Center Punches, 5 1/4 in, Tool Steel (1 EA / EA)
$10.31Modified parabolic striking end for resistance to mushrooming and chippingFor metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points577-417/16$10.31 -
MAYHEW TOOLS
Mayhew Tools Center Punch - Full Finish, 6-1/4 in, 3/8 in Tip, Alloy Steel (1 EA / EA)
$11.35Used for piercing, or marking for starting drills, in metal and other materialsPoint sizes vary for larger or smaller holesAvailable in black oxide finish for additional rust protection479-24004$11.35 -
PROTO
Proto Center Punches, 4 5/8 in, Tool Steel (1 EA / EA)
$7.27Modified parabolic striking end for resistance to mushrooming and chippingFor metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points577-415/16$7.27 -
MAYHEW TOOLS
Mayhew Tools Center Punches, 4 in, 3/32 in tip, Alloy Steel (1 EA / EA)
$4.75Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind479-74000$4.75 -
MAYHEW TOOLS
Mayhew Tools Center Punches, 5 in, 3/16 in tip, Alloy Steel (1 EA / EA)
$5.47Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind479-74002$5.47 -
PROTO
Proto Center Punches, 4 1/4 in, Tool Steel (1 EA / EA)
$7.53Modified parabolic striking end for resistance to mushrooming and chippingFor metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points577-411/4$7.53 -
MAYHEW TOOLS
Mayhew Tools Center Punch - Full Finish, 6 in, 5/16 in Tip, Alloy Steel (1 EA / EA)
$7.90Used for piercing, or marking for starting drills, in metal and other materialsPoint sizes vary for larger or smaller holesAvailable in black oxide finish for additional rust protection479-24003$7.90 -
MAYHEW TOOLS
Mayhew Tools Center Punches, 4 in, 3/8 in tip, Alloy Steel (1 EA / EA)
$6.26Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind479-24301$6.26 -
MAYHEW TOOLS
Mayhew Tools Center Punches, 3 1/4 in, 1/4 in tip, Alloy Steel (12 EA / BOX)
$72.79Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind479-24200$72.79 -
L.S. Starrett
L.S. Starrett Center Punches w/Square Shank, 5 in, 1/4 in tip, Steel (1 EA / EA)
$103.77Have a square knurled grip and will not roll when laid downHardened and properly temperedTips are accurately centered and ground at the proper angle to give maximum service681-51284$103.77 -
MAYHEW TOOLS
Mayhew Tools Center Punch, 6 in, 5/16 in tip, Alloy Steel (1 EA / EA)
$6.83Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind479-74003$6.83 -
MAYHEW TOOLS
Mayhew Tools Center Punches, 6 1/4 in, 3/8 in tip, Alloy Steel (1 EA / EA)
$10.41Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind479-74004$10.41 -
MAYHEW TOOLS
Mayhew Tools Center Punches, 4 in, 1/2 in tip, Alloy Steel (6 EA / BOX)
$46.12Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind479-24302$46.12 -
MAYHEW TOOLS
Mayhew Tools Center Punches, 4 1/2 in, 5/32 in tip, Alloy Steel (1 EA / EA)
$5.03Center punches are used for piercing, marking or starting drills in metal and other materialsA black oxide finish is added to protect from rustDesigned using state-of-the-art technology and with customers in mind479-74001$5.03 -
MAYHEW TOOLS
Mayhew Tools Center Punch - Full Finish, 5 in, 3/16 in tip, Alloy Steel (1 EA / EA)
$6.13Used for piercing, or marking for starting drills, in metal and other materialsPoint sizes vary for larger or smaller holesAvailable in black oxide finish for additional rust protection479-24002$6.13 -
MAYHEW TOOLS
Mayhew Tools Center Punches - Full Finish, 4 in, 3/32 in tip, Alloy Steel (1 EA / EA)
$5.34Used for piercing, or marking for starting drills, in metal and other materialsPoint sizes vary for larger or smaller holesAvailable in black oxide finish for additional rust protection479-24000$5.34 -
L.S. Starrett
L.S. Starrett Center Punches w/Square Shank, 4 1/2 in, 3/16 in tip, Steel (6 EA / BOX)
$100.07Have a square knurled grip and will not roll when laid downHardened and properly temperedTips are accurately centered and ground at the proper angle to give maximum service681-51283$100.07 -
L.S. Starrett
L.S. Starrett Center Punches w/Round Shank, 4 in, 5/32 in tip, Steel (12 EA / BOX)
$148.25Made of specially selected steel, hardened and properly temperedWell proportioned, nicely finished and have a knurled finger gripPoints are ground at the proper angle to give maximum service, and the tips are accurately centered681-50486$148.25 -
L.S. Starrett
L.S. Starrett Center Punches w/Round Shank, 5 in, 1/4 in tip, Steel (1 EA / EA)
$14.91Made of specially selected steel, hardened and properly temperedWell proportioned, nicely finished and have a knurled finger gripPoints are ground at the proper angle to give maximum service, and the tips are accurately centered681-50487$14.91 -
L.S. Starrett
L.S. Starrett Center Punches w/Round Shank, 4 in, 1/8 in tip, Steel (1 EA / EA)
$12.11Made of specially selected steel, hardened and properly temperedWell proportioned, nicely finished and have a knurled finger gripPoints are ground at the proper angle to give maximum service, and the tips are accurately centered681-50485$12.11 -
L.S. Starrett
L.S. Starrett Center Punches w/Round Shank, 3 in, 1/16 in tip, Steel (12 EA / BOX)
$143.80Made of specially selected steel, hardened and properly temperedWell proportioned, nicely finished and have a knurled finger gripPoints are ground at the proper angle to give maximum service, and the tips are accurately centered681-50482$143.80 -
PROTO
Proto Center Punches, 6 1/4 in, Tool Steel (1 EA / EA)
$14.84Modified parabolic striking end for resistance to mushrooming and chippingFor metal working layout such as marking intersecting lines, hole locations, and pilot drill starting points577-415/8$14.84