Tools
A tool is an implement or device used directly upon a piece of material to shape it into a desired form. Hand tool,s any of the implements used by craftspersons in manual operations, such as chopping, chiseling, sawing, filing, or forging. Complementary tools, often needed as auxiliaries to shaping tools, include such implements as the hammer for nailing and the vise for holding. A craftsperson may also use instruments that facilitate accurate measurements: the rule, divider, square, and others. Power tools—usually handheld motor-powered implements such as an electric drill or electric saw—perform many of the old manual operations and as such may be considered hand tools.
-
Clamps & Vises
-
Electrical Tools
- Tools
-
Hand Tools
-
Marking Tools
-
Measuring & Leveling Tools
-
Power Tools
-
Tool Storage
- Hand Tool Organizers & Belts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Nupla
NUPLA BD-8ECS 8-LB DOUBLE FACESLEDGE HAMMER W/32 (2 EA / BX)
$135.11Drop forged, heat treated and tempered carbon steel sledge head with dual machined striking faces and chamfers Durable Ergo-Power fiberglass handle is all-weather, chemical, and insect-resistant Ergonomic non-slip grip for slippery conditions545-27-708$135.11 -
Klein Tools
KLEIN TOOLS ELECTRICIAN'S SCISSORS 51/4-INCH (1 EA / EA)
$22.20Designed for telecom and electrical applications, and heavy-duty use Strong tough tempered steel Nickel-plated finish resists corrosion Scraper and file on outside of both blades Screw hinge permits adjustment409-2100-5$22.20 -
Nupla
NUPLA BD8-18 8LB.DOUBLEFACE SLEDGE HAMMER W/18" HANDL (2 EA / BOX)
$57.84Forged-steel head Reinforced head joint545-27-088$57.84 -
STANLEY
STANLEY T15 TORX SCREWDRIVER (6 EA / BX)
$8.22Ergonomically designed handle with slip-resistant textured grip for comfortable hold Heat-treated alloy steel bars hold up to repeated use Sets designed to satisfy wide range of fastening needs680-60-011$8.22 -
Klein Tools
Klein Tools Torpedo Levels, 9 in, 3 Vials, Aluminium, Magnetic, V-Grooved (1 EA/EA)
$26.77High-visibility orange body is easy-to-see on conduit and at the job site Large, easy-to-read high-visibility vials at three angles: level, 90 and 45 degrees409-935R$26.77 -
JPW Industries
DISCONTINUED - NO SALE: Wilton B.A.S.H Utility Vise and Hammer Combo, 6-1/2 in Jaw, 3-3/16 in Throat Depth, Swivel Base (1 EA)
$306.72DISCONTINUED - NO SALE: DISCONTINUED - NO SALE: Wilton B.A.S.H Utility Vise and Hammer Combo, 6-1/2 in Jaw, 3-3/16 in Throat Depth, Swivel Base (1 EA)825-11128BH$306.72 -
Stanley Products
Stanley Products Reversible Safety Wire Twister Pliers, Straight Jaw, 8 3/4 in Long (1 EA/EA)
$154.18Cuts stainless steel wire Heat-treated cutting edges Automatic spring return speeds operation and reduces fatigue Right and left twist capability Holds wire securely and resists kinking Easy access to confined, restricted areas For aviation and other...577-196-TT$154.18 -
DeWalt
DeWalt XR Compact Cordless Chainsaws, 12 in, Trigger Switch, 25.2 ft/s (1 EA / EA)
$331.64Low kick-back 12 in Oregon bar and chain for construction and outdoor cutting applicationsHigh-efficiency brushless motor maximizes runtime and motor lifeCompact and lightweight design for maximum user control115-DCCS620B$331.64 -
LENOX
LENOX 9" X 1" X .050" CARBIDETIPPED (1 EA / EA)
$22.29High performance carbides are welded to increase durability and prevent tooth loss Tall blade profile delivers straight cuts and long life in demanding metal cutting applications Each tooth is precision ground to quickly cut through difficult metals433-20142249108RCT$22.29 -
C.H. Hanson
C.H. Hanson Brass Stencil Letter & Number Sets, Brass, 2 in (1 ST/EA)
$181.31Durable brass for long-lasting service Clean up easily with paint solvent Quick, legible signs on all surfaces Use brush, spray ink, paint or markers Reusablelong lasting337-10151$181.31 -
C.H. Hanson
C.H. Hanson Pivot Squares, With Pouch (1 EA / EA)
$163.92Precisely measure any angle, pitch or risePositive lock and machined scale337-03060$163.92 -
C.H. Hanson
C.H. Hanson Brass Stencil Letter & Number Sets, Brass, 1 in (1 SET/PK)
$119.28Durable brass for long-lasting service Clean up easily with paint solvent Quick, legible signs on all surfaces Use brush, spray ink, paint or markers Reusablelong lasting337-10148$119.28 -
C.H. Hanson
C.H. Hanson Brass Stencil Letter & Number Sets, Brass, 4 in (1 SET/ST)
$414.07Durable brass for long-lasting service Clean up easily with paint solvent Quick, legible signs on all surfaces Use brush, spray ink, paint or markers Reusablelong lasting337-10154$414.07 -
Klein Tools
Klein Tools Heavy-Duty Long Nose Pliers, Alloy Steel, 8 7/16 in (1 EA/EA)
$350.97Induction hardened cutting knives for long life Heavier design for greater cutting power Extended handles provide added reach and leverage409-D203-8NCR$350.97 -
Klein Tools
Klein Tools Standard Diagonal Cutter Pliers, 6 1/8 in (1 EA/EA)
$49.02Tapered nose for easy working in confined areas409-D202-6C$49.02 -
Pferd
Pferd Carbide Tree/Radius Shaped Bur Bit, 1/2"Dia. x 1"L Cut, 3R Double Cut (1 EA/EA)
$41.52Manufactured in compliance with the highest quality standards Outstanding quality, long service life and excellent stock removal performance allow for economical work with diverse materials, delivering excellent results Easily identified by...419-22754$41.52 -
Klein Tools
Klein Tools Folding Wood Rules, 6 ft, Wood (1 EA/EA)
$42.14Stud center in red Markings on both sides have a tough, abrasion resistant coating409-901-6$42.14 -
Klein Tools
Klein Tools RATCHET BOX WRENCH (1 EA/ST)
$35.12Laminated construction for strength Different size opening at each end Ratchet reverses by turning ratchet over For use in confined spaces and on long studs409-68203$35.12 -
Martin Tools
Martin Tools BODY HMR (1 EA/ST)
$64.14Cross grooved Extra wide faces are cross grooved and used for shrinkage on large surfaces - chisel end used on sharp corners276-153S$64.14 -
Martin Tools
Martin Tools BODY HMR (1 EA/CT)
$45.57Both high and low-crown faces for "on or off dolly" work For fender and high-crowned panel dinging or bumping276-161G$45.57 -
Martin Tools
Martin Tools 12-Point Flare Nut Wrenches, 7/8 in (1 EA)
$46.45Drop forged from steel bar These wrenches are similar to box end wrenches, except they do not completely encircle the nut Special purpose single end wrenches designed for use on flare nuts and fittings on tubing assemblies primarily for hydraulic,...276-BLK4128$46.45 -
Martin Tools
MARTIN TOOLS 1-1/16 SE WR (1 EA / EA)
$43.94Drop forged from steel bar Special purpose single-end wrenches have an extra thick 15-degree angled opening designed for heavy industrial service Single head open end wrenches (also referred to as ''Engineer's'' wrenches) are drop forged from steel bar276-7$43.94 -
Martin Tools
Martin Tools BODY HMR (1 EA)
$56.79Excellent for finishing Cross peen used for working in sharp corners around mouldings and for caulking276-153G$56.79 -
Martin Tools
Martin Tools 12-Point Flare Nut Wrenches, 1 in (1 EA)
$46.65Drop forged from steel bar These wrenches are similar to box end wrenches, except they do not completely encircle the nut Special purpose single end wrenches designed for use on flare nuts and fittings on tubing assemblies primarily for hydraulic,...276-BLK4132$46.65 -
Martin Tools
MARTIN TOOLS 1-7/16 SE WR (1 EA / EA)
$82.26Drop forged from steel bar Special purpose single-end wrenches have an extra thick 15-degree angled opening designed for heavy industrial service Single head open end wrenches (also referred to as ''Engineer's'' wrenches) are drop forged from steel bar276-9$82.26 -
Martin Tools
Martin Tools BODY HMR (1 EA/CA)
$64.14Sharp point - long reach For low spots on high crown panels and other work with long reach276-158GMS$64.14 -
Martin Tools
Martin Tools 12-Point Flare Nut Wrenches, 1 1/8 in (1 EA)
$57.35Drop forged from steel bar These wrenches are similar to box end wrenches, except they do not completely encircle the nut Special purpose single end wrenches designed for use on flare nuts and fittings on tubing assemblies primarily for hydraulic,...276-BLK4136$57.35 -
Klein Tools
Klein Tools Keystone-Tip Cushion-Grip Screwdrivers, 5/16 in, 10 15/16 in Overall L (1 EA/CA)
$16.78Handle resists slippage Handle resists oil, gas, and water Heat-treated and tempered shank Cushion-Grip handle for greater torque and comfort Premium chrome-plated for smooth feel and corrosion resistance Internal flanges inside handle provide solid,...409-602-6$16.78 -
Klein Tools
Klein Tools PowerLine Padded Tool Belt (1 EA/CA)
$76.44Cushioned pad for stability and comfort Tapered front for comfort while bending Heavy Duty 2" wide nylon web belt with rugged closure409-5704XL$76.44 -
Klein Tools
Klein Tools Standard Long-Nose Pliers, Steel, 6 5/8 in (1 EA)
$37.47Slim head design for working in confined areas Hot-riveted joint ensures smooth action and no handle wobble Knurled jaws for sure wrapping and looping Curved handles provide greater tool control409-D301-6$37.47 -
Klein Tools
Klein Tools Midget Standard-Nose Diagonal Cutters, 4 3/16 in, Bevel (1 EA/CA)
$54.11Drop forged, hardened, and tempered construction Pliers halves are matched side to side, jaw to jaw, and hot riveted Semi-flush cutting knives Tapered nose Precision machined, mating surfaces and design dimensions, to extremely close tolerances409-D257-4C$54.11 -
Klein Tools
Klein Tools Side-Cutting Pliers, 9 3/8 in Length, Journeyman Handle (1 EA)
$61.95Soft handle material on outer surface for comfort and a firm grip Hard black material on inner surface and handle ends for toughness and durability Induction hardened cutting knives Hot-riveted joint High-leverage design for 46% greater cutting and...409-J213-9NE$61.95 -
Martin Tools
Martin Tools 12-Point Flare Nut Wrenches, 1 1/16 in (1 EA)
$51.03Drop forged from steel bar These wrenches are similar to box end wrenches, except they do not completely encircle the nut Special purpose single end wrenches designed for use on flare nuts and fittings on tubing assemblies primarily for hydraulic,...276-BLK4134$51.03 -
Martin Tools
Martin Tools 12-Point Flare Nut Wrenches, 15/16 in (1 EA/BOX)
$48.48Drop forged from steel bar These wrenches are similar to box end wrenches, except they do not completely encircle the nut Special purpose single end wrenches designed for use on flare nuts and fittings on tubing assemblies primarily for hydraulic,...276-BLK4130$48.48 -
Martin Tools
Martin Tools BODY HMR (1 EA/BOX)
$59.29Blunt point - long reach For low spots on high crown panels and other work with long reach Will not pick holes in the metal276-158GM$59.29 -
$59.67 -
C.H. Hanson
C.H. Hanson Brass Stencil Letter & Number Sets, Brass, 2 in (1 ST/BOX)
$153.22Durable brass for long-lasting service Clean up easily with paint solvent Quick, legible signs on all surfaces Use brush, spray ink, paint or markers Reusablelong lasting337-10111$153.22 -
Klein Tools
Klein Tools Insulated High-Leverage NE-Type Side Cutter Pliers, 9 1/4 in Length (1 EA/BOX)
$127.34Smooth streamlined nose with knurled jaws Ultra-durable "2000 Series" cutting knives for ACSR, bolts, nails, and most hardened wire Pliers halves are matched side-to-side, jaw-to-jaw, and hot riveted 2-layer insulation tested to 1000-volts Precision...409-D213-9NE-CR-INS$127.34 -
Pferd
Pferd Carbide Cylindrical/Radius Bur Bit, 1/2"Dia. x 1"L Cut, 1/4" Shank, Alt. Diamond (1 EA/BOX)
$52.91Manufactured in compliance with the highest quality standards Outstanding quality, long service life and excellent stock removal performance allow for economical work with diverse materials, delivering excellent results Easily identified by...419-25882$52.91 -
Klein Tools
Klein Tools Side-Cutting Pliers, 9 3/8 in Length, Journeyman Handle (1 EA/BOX)
$73.13Soft handle material on outer surface for comfort and a firm grip Hard black material on inner surface and handle ends for toughness and durability Induction hardened cutting knives Hot-riveted joint High-leverage design for 46% greater cutting and...409-J213-9NECR$73.13