Tools
A tool is an implement or device used directly upon a piece of material to shape it into a desired form. Hand tool,s any of the implements used by craftspersons in manual operations, such as chopping, chiseling, sawing, filing, or forging. Complementary tools, often needed as auxiliaries to shaping tools, include such implements as the hammer for nailing and the vise for holding. A craftsperson may also use instruments that facilitate accurate measurements: the rule, divider, square, and others. Power tools—usually handheld motor-powered implements such as an electric drill or electric saw—perform many of the old manual operations and as such may be considered hand tools.
-
Clamps & Vises
-
Electrical Tools
- Tools
-
Hand Tools
-
Marking Tools
-
Measuring & Leveling Tools
-
Power Tools
-
Tool Storage
- Hand Tool Organizers & Belts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Gentec
Gentec Crimping Tools, 3/16 in; 1/4 in (1 EA / EA)
$62.99Made of high quality alloy, with a one piece forged jaw for super strength331-C-5SP$62.99 -
Greenlee
Greenlee 21982 WIRE DISPENSER (1 EA / EA)
$2,502.77Spindles are angled to contain reels and act as a brake while paying out wireThe spool rack has an adjustable guide loop and can be turned 360⼠independent of the base332-910$2,502.77 -
APEX
Apex Square Drive Sockets, 3/8 in Drive, 3/8 in Tip (1 EA / EA)
$47.54Proprietary steel and heat treat process yields strength and long lifeCutting-edge machining process results in tighter tolerances and superior product consistency071-834-F$47.54 -
Apex Tool Group
Apex Tool Group 13 Piece Bit Socket Sets, 1/4 in, 3/8 in & 1/2 in (1 EA/EA)
$81.27Heat treated socket bases for durability and serviceability Professional, full polish chrome Convenient storage rail329-80725$81.27 -
Crescent/Lufkin
Crescent/Lufkin Executive Thinline Measuring Tapes, 1/4 in; 6 mm x 6 ft; 2 m (1 EA / EA)
$30.76Easy-to-read bladePower retractionFor office, briefcase, or pocket182-W606ME$30.76 -
GEARWRENCH
GEARWRENCH 11 Piece Bit Socket Sets, 3/8 in, SAE (1 ST / ST)
$73.13Heat treated socket bases for durability and serviceabilityProfessional, full polish chromeConvenient storage rail329-80555$73.13 -
GEARWRENCH
GEARWRENCH 37 Piece Surface Drive Socket Sets, 1/2 in, 12 Point (1 EA / EA)
$230.28Surface Drive technology reduces fastener roundingChamfered opening to guide fastener into socketLarge hard-stamped size identificationDouble line (SAE) and knurled (metric) ring to easily identify standard versus metric socketsFull polish finish cleans...329-80730$230.28 -
CRESCENT/WISS
Crescent/Wiss High Leverage Multi-Purpose Shears, 7 3/4 in, Black (1 EA / EA)
$41.21Corrosion-resistant nickel-plated steel bladesCurved handle design for comfortable grip and minimal hand fatigueSerrated cutting edgeAbility to cut thin wire for floral designs and other crafts186-2DAN$41.21 -
GEARWRENCH
GEARWRENCH 5 Pc. SAE Ratcheting Flex Flare Nut Wrench Set (1 ST / ST)
$252.10Quickly ratchet flare nuts and bolts without removing the wrench from the fastenerFlex head provides access to difficult-to-reach hose fittings and gets around other obstructionsFlare nut wrench head easily slips over lines329-89100$252.10 -
GEARWRENCH
GEARWRENCH 7 Piece Combination Ratcheting Wrench Sets, SAE (1 SET / SET)
$74.13Ratcheting box end needs as little as 5‚° to move fasteners vs. 30‚° for standard wrenchesBright, full polish chrome finishThe original patented ratcheting wrenchSurface Drive on box end provides off-corner loading for better grip and reduced fastener...329-9317$74.13 -
GEARWRENCH
GEARWRENCH Quick Release Teardrop Ratchets, 1/4 in, Chrome (1 EA / EA)
$27.11Quick-release drive tool retentionFull polish chrome handleBright chrome finish329-81014$27.11 -
GEARWRENCH
GEARWRENCH 6 Piece Bit Socket Sets, 1/4 in, Metric (1 ST / ST)
$44.69Heat treated socket bases for durability and serviceabilityProfessional, full polish chromeConvenient storage rail329-80321$44.69 -
GEARWRENCH
GEARWRENCH 1/2 in Drive Standard Sockets, 1.256 in, 12 Point (1 EA / EA)
$8.65Surface Drive technology reduces fastener roundingChamfered opening to guide fastener into socketLarge hard-stamped size identificationDouble line (SAE) and knurled (metric) ring to easily identify standard versus metric socketsFull polish chrome finish...329-80759$8.65 -
GEARWRENCH
GEARWRENCH 12 Piece Bit Socket Sets, 3/8 in, SAE (1 EA / EA)
$88.05Heat treated socket bases for durability and serviceabilityProfessional, full polish chromeConvenient storage rail329-80581$88.05 -
GEARWRENCH
GEARWRENCH 23 Piece Surface Drive Socket Sets With 84 Tooth Ratchet, 1/2 in, SAE (1 ST / ST)
$135.46Surface Drive technology reduces fastener rounding84 tooth, full polish chrome, thin profile ratchetKnurled full polish chrome extensionsFull polish chrome sockets with large hard stamp size markings329-80707$135.46 -
GEARWRENCH
GEARWRENCH 7 Piece Bit Socket Sets, 3/8 in, SAE (1 ST / ST)
$74.48Heat treated socket bases for durability and serviceabilityProfessional, full polish chromeConvenient storage rail329-80574$74.48 -
GEARWRENCH
GEARWRENCH 10 Piece Bit Socket Sets, 1,4 in and 3/8 in, SAE (1 ST / ST)
$81.27Heat treated socket bases for durability and serviceabilityProfessional, full polish chromeConvenient storage rail329-80588$81.27 -
GEARWRENCH
GEARWRENCH 7 Piece Combination Ratcheting Wrench Sets, Metric (1 SET / SET)
$74.13Ratcheting box end needs as little as 5‚° to move fasteners vs. 30‚° for standard wrenchesBright, full polish chrome finishThe original patented ratcheting wrenchSurface Drive on box end provides off-corner loading for better grip and reduced fastener...329-9417$74.13 -
General Tools
General Tools Wire Gages, #0-#36, Satin Finish (1 EA / EA)
$29.75American Standard wire gage used for gaging non-ferrous wire and metals such as copper, brass and aluminumChrome finished, heavy gage hardened and tempered tool steelDecimal equivalents of each size are stamped on reverse side318-20$29.75 -
General Tools
General Tools Heavy-Duty Steel Automatic Center Punch, 6 in, .083 in Tip, Steel (1 EA / EA)
$38.70Replaceable hardened steel point and shaftSpring tension adjusts for light or heavy strokes and markingOne-handed spring impact operation; no hammer needed318-78$38.70 -
General Tools
General Tools 1/16" TO 1/2" DRILL GAGE (1 EA / EA)
$15.57Hole sizes and decimal equivalents are permanently etched on faceMade of heat treated heavy gage steel, machined and ground to close tolerances318-14$15.57 -
C.H. Hanson
C.H. Hanson Heavy Duty Steel Hand Stamps, 3 1/8 in, S, Steel (1 EA / EA)
$15.47Individual stamps for moderate industrial applicationsCrafted for hand-held, hammer-struck marking337-21151-S$15.47 -
GEARWRENCH
GEARWRENCH Tap Adapters, 3/8 - 1/2 in Tap Size (1 EA / EA)
$28.24Sliding "T" for adaptersDesigned for use with the GearRatchet SystemFeatures patented Twist Lock Guide System329-3883$28.24 -
Greenlee
Greenlee FISHTAPE STEEL-65' (1 EA / EA)
$68.05Nylon fish tapes are non-conductive, curl resistant for fast, clean fishingNylon fish tape is good for fishing in conduit with wire or cable presentSteel fish tape is oil-tempered spring steel for excellent fishing performanceRugged case design improves...332-FTS438-65$68.05 -
Greenlee
Greenlee 01696 25 FT FISH TAPE (3 EA / PKG)
$47.84Case has crank handleFlat tape reaches easily above ceilings, under carpets, and through walls to install wire332-438-2X$47.84 -
GEARWRENCH
GEARWRENCH 13 Piece, Surface Drive Socket Sets With 24 Tooth Ratchet, 3/4 in, SAE (1 EA / EA)
$291.26Surface Drive technology reduces fastener rounding24 tooth full polish chrome quick-release ratchetKnurled full polish chrome extensionsFull polish chrome flex handle with knurled gripFull polish chrome sockets with large hard stamp size markings329-80879$291.26 -
GEARWRENCH
GEARWRENCH 7 Piece Bit Socket Sets, 1/2 in, Metric (1 ST / ST)
$81.27Heat treated socket bases for durability and serviceabilityProfessional, full polish chromeConvenient storage rail329-80720$81.27 -
BESSEY
BESSEY classiX Heavy Duty Pad Clamp, 16 in, 5 1/2 in, 3,660 lb (1 EA / EA)
$130.64All-steel bar clamp with heavy-duty padHeat-treated, high carbon ACME threaded spindle provides durability and high-load capacityDesigned for heavier applications013-GSM40$130.64 -
APEX
APEX Magnetic Quick Release Bit Holders, 1/4 in Drive, 2 29/32 in Length (1 EA / EA)
$46.08Bit holders let you use a variety of insert bits in power tool applicationsYou get economy and flexibility Å“ and fasteners can be magnetically held to the bitAllows fast, easy insert bit changes while assuring that bits stay securely in the bit...071-QR-M-490-A$46.08 -
APEX
APEX Magnetic Quick Release Bit Holders, 1/4 in Drive, 2 in Length (1 EA / EA)
$89.11Bit holders let you use a variety of insert bits in power tool applicationsYou get economy and flexibility Å“ and fasteners can be magnetically held to the bitAllows fast, easy insert bit changes while assuring that bits stay securely in the bit...071-QR-M-490-2$89.11 -
APEX
APEX Hex Power Drive Bit Holders, 1/4 in, 8 in Long (1 EA / EA)
$52.19Proprietary steel and heat treat process yields greater strength and longer bit lifeCutting-edge machining process results in tighter tolerances and superior product consistencyProvide a better and more consistent fit to fasteners, leading to better...071-490-8$52.19 -
APEX
APEX Hex Power Drive Bit Holders, 1/4 in, 6 in Long (1 EA / EA)
$35.58Proprietary steel and heat treat process yields greater strength and longer bit lifeCutting-edge machining process results in tighter tolerances and superior product consistencyProvide a better and more consistent fit to fasteners, leading to better...071-490-6$35.58 -
APEX
APEX Hex Power Drive Bit Holders, 1/4 in, 5 in Long (1 EA / EA)
$45.10Proprietary steel and heat treat process yields greater strength and longer bit lifeCutting-edge machining process results in tighter tolerances and superior product consistencyProvide a better and more consistent fit to fasteners, leading to better...071-490-5$45.10 -
APEX
APEX Hex Power Drive Bit Holders, 1/4 in, 4 in Long (1 EA / EA)
$37.02Proprietary steel and heat treat process yields greater strength and longer bit lifeCutting-edge machining process results in tighter tolerances and superior product consistencyProvide a better and more consistent fit to fasteners, leading to better...071-490-4$37.02 -
APEX
APEX Hex Power Drive Bit Holders, 1/4 in, 3 in Long (1 EA / EA)
$38.01Proprietary steel and heat treat process yields greater strength and longer bit lifeCutting-edge machining process results in tighter tolerances and superior product consistencyProvide a better and more consistent fit to fasteners, leading to better...071-490-3$38.01 -
APEX
APEX Hex Power Drive Bit Holders, 1/4 in, 10 in Long (1 EA / EA)
$55.86Proprietary steel and heat treat process yields greater strength and longer bit lifeCutting-edge machining process results in tighter tolerances and superior product consistencyProvide a better and more consistent fit to fasteners, leading to better...071-490-10$55.86 -
CRESCENT
Crescent A-N Connector Pliers Repair Kits, Pads and Pins, White (1 EA / EA)
$8.40Comes with replacement inserts and pins for Crescent A-N connector pliers 52910NThe kit consists of 2 pins and 2 padsJaw pads are non-marring181-52910KITN$8.40 -
Greenlee
Greenlee FISHTAPE STEEL-125' (1 EA / EA)
$101.10Nylon fish tapes are non-conductive, curl resistant for fast, clean fishingNylon fish tape is good for fishing in conduit with wire or cable presentSteel fish tape is oil-tempered spring steel for excellent fishing performanceRugged case design improves...332-FTS438-125$101.10 -
GEARWRENCH
GEARWRENCH 27 Piece Surface Drive Socket Sets, 1/2 in, 6 Point (1 EA / EA)
$216.74Surface Drive technology reduces fastener roundingChamfered opening to guide fastener into socketLarge hard-stamped size identificationDouble line (SAE) and knurled (metric) ring to easily identify standard versus metric socketsFull polish finish cleans...329-80729$216.74 -
General Tools
General Tools Arch Punch Sets, Round, English, Plastic Roll Pouch (1 SET / SET)
$97.01Heat treated Sheffield forged steelMachined to close tolerances for creating precise holes in gasket material, rubber and soft metals318-1271ST$97.01