Tools
A tool is an implement or device used directly upon a piece of material to shape it into a desired form. Hand tool,s any of the implements used by craftspersons in manual operations, such as chopping, chiseling, sawing, filing, or forging. Complementary tools, often needed as auxiliaries to shaping tools, include such implements as the hammer for nailing and the vise for holding. A craftsperson may also use instruments that facilitate accurate measurements: the rule, divider, square, and others. Power tools—usually handheld motor-powered implements such as an electric drill or electric saw—perform many of the old manual operations and as such may be considered hand tools.
-
Clamps & Vises
-
Electrical Tools
- Tools
-
Hand Tools
-
Marking Tools
-
Measuring & Leveling Tools
-
Power Tools
-
Tool Storage
- Hand Tool Organizers & Belts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
IRWIN
Irwin Aircraft Extension Fractional Straight Shank Drill Bits, 1/8 in, 6 in L, Bulk (30 BIT / MCS)
$82.95Ideal for drilling in hard-to-reach areas and for running wires and cableBit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistanceFor general use in wood, metal, and plastic135-degree split...585-66608$82.95 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), Taper, 7/8-9 (1 EA / EA)
$19.70Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1361$19.70 -
Stanley Products
Stanley Products Metric Thread Taps (HCS) (3 BOX/EA)
$14.47Ideal for auto repair and machinery where metric threads are specified585-8331$14.47 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), Plug, 3/4-10 (3 EA / BX)
$46.58Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-8158ZR$46.58 -
IRWIN
Irwin Aircraft Extension Fractional Straight Shank Drill Bits, 3/8 in, 6 in L, Carded (3 BIT / BOX)
$25.69Ideal for drilling in hard-to-reach areas and for running wires and cableBit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistanceFor general use in wood, metal, and plastic135-degree split...585-66724$25.69 -
IRWIN
Irwin Aircraft Extension Fractional Straight Shank Drill Bits, 1/8 in, 6 in L, Carded (3 BIT / BOX)
$10.33Ideal for drilling in hard-to-reach areas and for running wires and cableBit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistanceFor general use in wood, metal, and plastic135-degree split...585-66708$10.33 -
IRWIN HANSON
Irwin Hanson Adjustable Tap Handle and Reamer Wrenches, Carded (1 EA / EA)
$25.48Straight handle design provides leverage, especially when using larger diameter tapesDesigned for use with taps, reamers, screw extractors and other tools with a square shank585-12088$25.48 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), Plug, 7/16-20, Carded (3 EA / BOX)
$18.91Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-8140$18.91 -
IRWIN HANSON
Irwin Hanson Machine Screw Taps (HCS), Plug, #12-24 (3 EA / BOX)
$11.67Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-8032$11.67 -
IRWIN HANSON
Irwin Hanson Machine Screw Taps (HCS), 10-24 NC, Chamfer - 8 to 10 Threads (5 EA / CTN)
$16.52Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1028$16.52 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), Plug, 3/8-24, Bulk (5 EA / CTN)
$25.89Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1436$25.89 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), Taper, 1-8 (1 EA / EA)
$24.60Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1365ZR$24.60 -
IRWIN
Irwin Aircraft Extension Fractional Straight Shank Drill Bits, 3/16 in, 6 in L, Carded (3 BIT / BOX)
$10.99Ideal for drilling in hard-to-reach areas and for running wires and cableBit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistanceFor general use in wood, metal, and plastic135-degree split...585-66712$10.99 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), Bottom, 1-14 (1 EA / EA)
$21.66Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1567$21.66 -
Ridgid
Ridgid Pipe Tap, 1/2 in Pipe Size, 14 Threads per Inch, NPT, RH (1 EA / EA)
$44.59Made from carbon steel in right hand configuration onlyThese taps are especially suited for restricted area workAll taps have taper of 3/4 inch per footMarked with drill size for pilot hole632-35830$44.59 -
IRWIN HANSON
Irwin Hanson Metric Thread Taps (HCS) (3 EA / BX)
$12.07Ideal for auto repair and machinery where metric threads are specified585-8322ZR$12.07 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), Plug, 3/4-16 (3 EA / BOX)
$45.92Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-8160$45.92 -
Stanley Products
Stanley Products Hexagon Taper Pipe Dies (HCS) (1 EA/DOZ)
$13.20Ideal for plumbing and air applications585-7005$13.20 -
STANLEY
Stanley Super Wonder Bar Pry Bars, 15 1/2 in, Offset; Gooseneck Claw (1 EA / EA)
$17.89Tightly radius bend angle for precise positioningExtra-long tongue for better grip and longer reach for hard-to-get-at placesArch in center of bar gives more swing during nail pulling¢¢¬¢‚¬no need for a wood blockWorks as a panel lift: position pry end...680-55-525$17.89 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 9/16 in-18 NF, Chamfer - 3 to 5 Threads (5 EA / MCS)
$9.85Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1449$9.85 -
Ridgid
Ridgid Pipe Tap, 1 in Pipe Size, 11-1/2 Threads per Inch, NPT, RH (1 EA / EA)
$96.27Made from carbon steel in right hand configuration onlyThese taps are especially suited for restricted area workAll taps have taper of 3/4 inch per footMarked with drill size for pilot hole632-35840$96.27 -
Stanley Products
Stanley Products Hexagon Metric Dies (HCS) (1 EA/PK)
$11.65Ideal for automotive repair and machinery where metric threads are specified585-6956$11.65 -
STANLEY
Stanley Carpet Knife Blades, 2 1/4 in, High Carbon Steel (5 EA / CD)
$3.45Features double cutting edgeHigh carbon steel bladeFits Stanley and most other carpet knives680-11-525$3.45 -
Stanley Products
Stanley Products Hexagon Machine Screw Dies (HCS) (3 EA/ST)
$14.39Ideal for maintenance and repair work Recommended for use with hexagon die stock Die can be used with a wrench or socket when space is limited585-9434$14.39 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), Bottom, 9/16-18 (1 EA / EA)
$9.56Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1549$9.56 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), Bottom, 9/16-12 (1 EA / EA)
$11.06Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1548ZR$11.06 -
Ridgid
Ridgid E5118 1 1/4 NPT TAP (1 EA / EA)
$134.44Made from carbon steel in right hand configuration onlyThese taps are especially suited for restricted area workAll taps have taper of 3/4 inch per footMarked with drill size for pilot hole632-35845$134.44 -
Ridgid
Ridgid E5112 1/8 NPT TAP (1 EA / EA)
$23.16Made from carbon steel in right hand configuration onlyThese taps are especially suited for restricted area workAll taps have taper of 3/4 inch per footMarked with drill size for pilot hole632-35815$23.16 -
STANLEY
Stanley 3/4" X 30" RIPPING BAR (1 EA / EA)
$13.26Ideal for basic demolition workHigh carbon steelSlotted claw and beveled ends for functionality and performanceForged one-piece steel construction for increased strength and durabilityYellow powder-coated claw end for high visibility680-55-130$13.26 -
Ridgid
Ridgid E5114 3/8" NPT Tap (1 EA / EA)
$36.73Made from carbon steel in right hand configuration onlyThese taps are especially suited for restricted area workAll taps have taper of 3/4 inch per footMarked with drill size for pilot hole632-35825$36.73 -
Ridgid
Ridgid E5119 1 1/2 NPT TAP (1 EA / EA)
$180.44Made from carbon steel in right hand configuration onlyThese taps are especially suited for restricted area workAll taps have taper of 3/4 inch per footMarked with drill size for pilot hole632-35850$180.44 -
Ridgid
Ridgid E5116 3/4" NPT Tap (1 EA / EA)
$64.04Made from carbon steel in right hand configuration onlyThese taps are especially suited for restricted area workAll taps have taper of 3/4 inch per footMarked with drill size for pilot hole632-35835$64.04 -
STANLEY
Stanley Forged Hexagonal Steel Ripping Bars, 3/4 in x 36 in, Chisel and Claw (1 EA / EA)
$14.50Ideal for basic demolition workHigh carbon steelSlotted claw and beveled ends for functionality and performanceForged one-piece steel construction for increased strength and durabilityYellow powder-coated claw end for high visibility680-55-136$14.50 -
Stanley Products
IRWIN 1/4 BSP PIPE TAP BULK (3 EA / PKG)
$20.61Cuts internal threads in pipes Nominal size of the tap is that of the pipe fitting being tapped Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) Ideal for pipe fittings Tapered at a rate of 3/4" per foot585-1912zr$20.61 -
Stanley Products
Stanley Products Adjustable Round Fractional Dies Right & Left-hand (HCS) (1 EA/DZ)
$15.10Adjustable round dies ideal for precision threading Left-hand dies cut threads with a left-hand rotation585-4049$15.10 -
IRWIN HANSON
Irwin Hanson Hexagon Machine Screw Dies (HCS) (5 EA / MCS)
$54.60Ideal for maintenance and repair workRecommended for use with hexagon die stockDie can be used with a wrench or socket when space is limited585-6848$54.60 -
Stanley Products
Stanley Products Round Fractional Dies (HCS) (5 EA/CA)
$49.16Solid round fractional dies ideal for general purpose threading Adjustable round dies ideal for precision threading585-3820$49.16 -
Stanley Products
Stanley Products Round Fractional Dies (HCS) (5 CTN/CA)
$47.90Solid round fractional dies ideal for general purpose threading Adjustable round dies ideal for precision threading585-3827$47.90 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), Plug, 5/8-11 (3 EA / BOX)
$35.93Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-8152$35.93 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), Plug, 9/16-18 (3 EA / BOX)
$29.61Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-8149$29.61