Tools
A tool is an implement or device used directly upon a piece of material to shape it into a desired form. Hand tool,s any of the implements used by craftspersons in manual operations, such as chopping, chiseling, sawing, filing, or forging. Complementary tools, often needed as auxiliaries to shaping tools, include such implements as the hammer for nailing and the vise for holding. A craftsperson may also use instruments that facilitate accurate measurements: the rule, divider, square, and others. Power tools—usually handheld motor-powered implements such as an electric drill or electric saw—perform many of the old manual operations and as such may be considered hand tools.
-
Clamps & Vises
-
Electrical Tools
- Tools
-
Hand Tools
-
Marking Tools
-
Measuring & Leveling Tools
-
Power Tools
-
Tool Storage
- Hand Tool Organizers & Belts
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
IRWIN HANSON
Irwin Hanson Re-threading Hexagon Fractional Dies Right & Left-hand (HCS) (5 EA / BX)
$50.25Designed for repairing damaged bolts and studs585-7229$50.25 -
IRWIN HANSON
Irwin Hanson Re-threading Hexagon Fractional Dies Right & Left-hand (HCS) (5 EA / CTN)
$90.80Designed for repairing damaged bolts and studs585-7254$90.80 -
IRWIN HANSON
Irwin Hanson Hexagon Metric Dies (HCS) (5 EA / MCS)
$58.25Ideal for automotive repair and machinery where metric threads are specified585-6959$58.25 -
IRWIN HANSON
Irwin Hanson Taper Pipe Taps (HCS), Taper, NPT (1 EA / EA)
$9.39Cuts internal threads in pipesNominal size of the tap is that of the pipe fitting being tappedAvailable in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP)Ideal for pipe fittingsTapered at a rate of 3/4" per foot585-1904$9.39 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 1/4 in-20 NC, Chamfer - 1 1/2 Threads (1 EA / EA)
$16.52Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1520$16.52 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 5/16 in-18 NC, Chamfer - 8 to 10 Threads (1 EA / EA)
$3.59Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1327$3.59 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 1/4 in-20 NC, Chamfer - 8 to 10 Threads (1 EA / EA)
$3.04Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1320$3.04 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 1 in-14 NS, Chamfer - 3 to 5 Threads (1 EA / EA)
$24.60Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1467ZR$24.60 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 3/8 in-16 NC, Chamfer - 1 1/2 Threads (1 EA / EA)
$5.24Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1534$5.24 -
IRWIN
Irwin Aircraft Extension Fractional Straight Shank Drill Bits, 3/8 in, 6 in L, Bulk (6 BIT / CTN)
$70.28Ideal for drilling in hard-to-reach areas and for running wires and cableBit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistanceFor general use in wood, metal, and plastic135-degree split...585-66624$70.28 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 1/4 in-28 NF, Chamfer - 3 to 5 Threads (5 EA / CTN)
$16.76Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1423$16.76 -
IRWIN
Irwin Aircraft Extension Fractional Straight Shank Drill Bits, 5/32 in, 6 in L, Bulk (6 BIT / CTN)
$14.28Ideal for drilling in hard-to-reach areas and for running wires and cableBit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistanceFor general use in wood, metal, and plastic135-degree split...585-66610$14.28 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 1/2 in-20 NF, Chamfer - 3 to 5 Threads (5 EA / CT)
$32.68Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1445$32.68 -
Stanley Products
Stanley Products Hexagon Machine Screw Dies (HCS) (5 CTN/ST)
$19.83Ideal for maintenance and repair work Recommended for use with hexagon die stock Die can be used with a wrench or socket when space is limited585-6431$19.83 -
IRWIN
Irwin Left-Hand Mechanics Length Cobalt High Speed Steel Drill Bits, 13/32 in, Split (6 EA / CT)
$103.83Constructed of M-42 8% cobalt high speed steel for super abrasive resistance in tough metalsHeavy-duty spiral flute design produces faster chip ejectionShorter cutting tips reduce torque for drilling in high tensile strength materials135-degree split...585-30526$103.83 -
Stanley Products
Stanley Products Hexagon Metric Dies (HCS) (1 EA/BX)
$21.99Ideal for automotive repair and machinery where metric threads are specified585-6634$21.99 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 1/4 in-20 NC, Chamfer - 3 to 5 Threads, Bulk (1 EA / EA)
$3.30Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1420$3.30 -
IRWIN
Irwin Aircraft Extension Fractional Straight Shank Drill Bits, 7/32 in, 6 in L, Bulk (6 BIT / CTN)
$26.68Ideal for drilling in hard-to-reach areas and for running wires and cableBit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistanceFor general use in wood, metal, and plastic135-degree split...585-66614$26.68 -
IRWIN
Irwin Aircraft Extension Fractional Straight Shank Drill Bits, 9/64 in, 6 in L, Bulk (6 BIT / CTN)
$19.51Ideal for drilling in hard-to-reach areas and for running wires and cableBit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistanceFor general use in wood, metal, and plastic135-degree split...585-66609$19.51 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 3/4 in-16 NF, Chamfer - 3 to 5 Threads (1 EA / EA)
$14.81Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1460$14.81 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 1/2 in-13 NC, Chamfer - 8 to 10 Threads (1 EA / EA)
$6.54Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1344$6.54 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 5/8 in-11 NC, Chamfer - 8 to 10 Threads (1 EA / EA)
$7.83Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1352$7.83 -
IRWIN HANSON
Irwin Hanson Machine Screw Taps (HCS), 10-32 NF (25 EA / CA)
$70.68Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1231ZR$70.68 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 1 in-8 NC, Chamfer - 3 to 5 Threads (1 EA / EA)
$24.60Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1465$24.60 -
IRWIN HANSON
Irwin Hanson Machine Screw Taps (HCS), 8-32 NC, Chamfer - 3 to 5 Threads (1 EA / EA)
$11.69Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1124$11.69 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 1 in-8 NC, Chamfer - 1 1/2 Threads (1 EA / EA)
$24.60Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1565ZR$24.60 -
IRWIN HANSON
Irwin Hanson Spark Plug Taps (HCS) (1 EA / EA)
$13.72Ideal for threading or re-threading spark plug holesSpark plug taps available in standard and metric threads585-2459$13.72 -
IRWIN HANSON
Irwin Hanson Machine Screw Taps (HCS), 6-48 NS (5 EA / CTN)
$14.56Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1121$14.56 -
Stanley Products
Stanley Products Hexagon Metric Dies (HCS) (5 EA/PK)
$21.99Ideal for automotive repair and machinery where metric threads are specified585-6627$21.99 -
Stanley Products
Stanley Products Re-threading Hexagon Fractional Dies Right & Left-hand (HCS) (1 EA/ST)
$23.40Designed for repairing damaged bolts and studs585-7745$23.40 -
IRWIN HANSON
Irwin Hanson Adjustable Tap Handle and Reamer Wrenches, Bulk (1 EA / EA)
$66.48Straight handle design provides leverage, especially when using larger diameter tapesDesigned for use with taps, reamers, screw extractors and other tools with a square shank585-12498$66.48 -
IRWIN HANSON
Irwin Hanson Fractional Taps (HCS), 5/16 in-18 NC, Chamfer - 1 1/2 Threads (1 EA / EA)
$19.04Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1527$19.04 -
IRWIN HANSON
Irwin Hanson Machine Screw Taps (HCS), 6-48 NS, Chamfer - 1 1/2 Threads (5 EA / CTN)
$14.53Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1221$14.53 -
Stanley Products
Stanley Products Re-threading Hexagon Fractional Dies Right & Left-hand (HCS) (1 EA/PKG)
$23.68Designed for repairing damaged bolts and studs585-7744$23.68 -
Stanley Products
Stanley Products Hexagon Taper Pipe Dies (HCS) (5 CTN/EA)
$21.58Ideal for plumbing and air applications585-6711$21.58 -
IRWIN HANSON
Irwin Hanson Machine Screw Taps (HCS), 10-32 NF, Chamfer - 3 to 5 Threads (1 EA / EA)
$15.22Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1131$15.22 -
Stanley Products
Stanley Products Re-threading Hexagon Fractional Dies Right & Left-hand (HCS) (1 EA/CT)
$24.18Designed for repairing damaged bolts and studs585-7260$24.18 -
IRWIN
Irwin Aircraft Extension Fractional Straight Shank Drill Bits, 1/8 in, 6 in L, Bulk (30 BIT / MCS)
$82.95Ideal for drilling in hard-to-reach areas and for running wires and cableBit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistanceFor general use in wood, metal, and plastic135-degree split...585-66608$82.95 -
IRWIN HANSON
Irwin Hanson Machine Screw Taps (HCS), 10-24 NC, Chamfer - 8 to 10 Threads (5 EA / CTN)
$16.52Ideal for routine maintenance, repair work and for re-threading where high accuracy and tolerance thread is not criticalStraight flutes are ground to provide rapid chip removal for efficient threadingDesigned for hand threading work in a variety of...585-1028$16.52 -
IRWIN
Irwin Aircraft Extension Fractional Straight Shank Drill Bits, 5/16 in, 6 in L, Bulk (6 BIT / CTN)
$54.07Ideal for drilling in hard-to-reach areas and for running wires and cableBit is constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistanceFor general use in wood, metal, and plastic135-degree split...585-66620$54.07