Tig Welding Wires

Increases resistance to intergranular corrosionDual classification ensures the maximum carbon content is 0.03%All Position Welding

Maximum carbon content is 0.03%Use for high temperature service applicationsDesigned for flat and horizontal welding positions

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Used for welding cast and wrought alloys of similar composition as well as dissimilar metals including stainless to mild steelsCan be used for welding high strength steelsVery high ferrite

Similar to type 309 except for the carbon content being lower than .03%Extra low carbon content provides good resistance to carbide precipitation and intergranular corrosionWorks well for dissimilar joints that undergo heat treatment

Similar to type 309 except for the carbon content being lower than .03%Extra low carbon content provides good resistance to carbide precipitation and intergranular corrosionWorks well for dissimilar joints that undergo heat treatment

Similar to type 309 except for the carbon content being lower than .03%Extra low carbon content provides good resistance to carbide precipitation and intergranular corrosionWorks well for dissimilar joints that undergo heat treatment

Similar to type 309 except for the carbon content being lower than .03%Extra low carbon content provides good resistance to carbide precipitation and intergranular corrosionWorks well for dissimilar joints that undergo heat treatment

Similar to type 309 except for the carbon content being lower than .03%Extra low carbon content provides good resistance to carbide precipitation and intergranular corrosionWorks well for dissimilar joints that undergo heat treatment

Similar to type 309 except for the carbon content being lower than .03%Extra low carbon content provides good resistance to carbide precipitation and intergranular corrosionWorks well for dissimilar joints that undergo heat treatment

Same analysis as ER308L but with a higher silicon contentHigher silicon content improves arc stability, bead appearance and wetting actionProduces exceptionally smooth welds for applications that require a good cosmetic appearancePrimarily used with...

Same analysis as ER308L but with a higher silicon contentHigher silicon content improves arc stability, bead appearance and wetting actionProduces exceptionally smooth welds for applications that require a good cosmetic appearancePrimarily used with...

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Features molybdenum grade that offers enhanced corrosion resistanceSuitable for all welding positions, except vertical down, has flux coating that renders smoother arc transfer and a self-peeling slag for easy removalLow carbon levels to eliminate...

Features molybdenum grade that offers enhanced corrosion resistanceSuitable for all welding positions, except vertical down, has flux coating that renders smoother arc transfer and a self-peeling slag for easy removalLow carbon levels to eliminate...

Features molybdenum grade that offers enhanced corrosion resistanceSuitable for all welding positions, except vertical down, has flux coating that renders smoother arc transfer and a self-peeling slag for easy removalLow carbon levels to eliminate...

Used for welding types 316 and 316L stainless steelsMaximum carbon content of 0.03% to reduce the possibility of formation of intergranular carbide precipitationPrimarily used for welding low carbon molybdenum bearing austenitic alloys

Used for welding types 304, 304L, 308 and 308L stainless steelsVery similar to type 308 but has a carbon content held to a max of 0.03% to avoid carbide precipitation

Extra low carbon electrode for the welding of type 304L, 321, and 347 stainless steelsControlled ferrite in the weld deposit gives excellent notch toughness at cryogenic temperaturesDeposits a max of 4% carbon in the weld metal to minimize the formation...

Used for welding types 304, 304L, 308 and 308L stainless steelsVery similar to type 308 but has a carbon content held to a max of 0.03% to avoid carbide precipitation

Used for welding types 304, 304L, 308 and 308L stainless steelsVery similar to type 308 but has a carbon content held to a max of 0.03% to avoid carbide precipitation

Used for welding types 304, 304L, 308 and 308L stainless steelsVery similar to type 308 but has a carbon content held to a max of 0.03% to avoid carbide precipitation

Used for welding types 304, 304L, 308 and 308L stainless steelsVery similar to type 308 but has a carbon content held to a max of 0.03% to avoid carbide precipitation

Used for welding types 304, 304L, 308 and 308L stainless steelsVery similar to type 308 but has a carbon content held to a max of 0.03% to avoid carbide precipitation

Used for welding types 304, 304L, 308 and 308L stainless steelsVery similar to type 308 but has a carbon content held to a max of 0.03% to avoid carbide precipitation

Used for welding types 304, 304L, 308 and 308L stainless steelsVery similar to type 308 but has a carbon content held to a max of 0.03% to avoid carbide precipitation

Used for welding types 304, 304L, 308 and 308L stainless steelsVery similar to type 308 but has a carbon content held to a max of 0.03% to avoid carbide precipitation

Used for welding types 304, 304L, 308 and 308L stainless steelsVery similar to type 308 but has a carbon content held to a max of 0.03% to avoid carbide precipitation

Used for welding types 304, 304L, 308 and 308L stainless steelsVery similar to type 308 but has a carbon content held to a max of 0.03% to avoid carbide precipitation