Tap Wrenches

Self-centering hardened steel jaws and knurled chuck sleeve provide a positive gripThe sliding T-handle fits into tight spaces while providing excellent leverage

Provides 5 degree ratcheting arc with reversible leverFeatures patented Twist Lock Guide SystemVortex drive

Ratchet can be set for right or left hand operation or locked for non-ratchet useSelf-centering hardened tool steel jaws and knurled chuck sleeveSliding T-handle for fitting into tight spaces

Twist lock guide system keeps dies centered while cutting threadsWorks 1" diameter hex shaped dies

Die adapter is designed for round and hex shaped diesProvides 5 degree ratcheting arc with reversible lever eliminating hand-over-hand turningAutolocking feature allows for safe removal of tap adapterSpring-loaded cap allows for quick-release of large...

Sliding "T" for adaptersDesigned for use with the GearRatchet SystemFeatures patented Twist Lock Guide System

Self-centering hardened steel jaws and knurled chuck sleeve provide a positive gripThe sliding T-handle fits into tight spaces while providing excellent leverage

Ratchet can be set for right or leftAlso locks for non-ratchet

Sliding "T" for adaptersDesigned for use with the GearRatchet SystemFeatures patented Twist Lock Guide System

Three position gear box for quick, efficient ratcheting actionDesigned for use with taps, reamers, screw extractors and other tools with a square shank

Straight handle design provides greater leverage, especially when using larger diameter tapes

End of TR-50 wrench has 3/8" square drive to accommodate socket wrench or extension when desiredDesigned for use with taps, reamers, screw extractors and other tools with a square shank

Designed for use with taps, reamers, screw extractors and other tools with a square shankAdjusted and tightened to size by twisting knurled nut

For holding taps, drills, reamers, and other small tools to be turned by handCentered body, for use on lathe centers or on upright drilling machines to start the tap straightJaws conform to the tool being held, making it rigid and less apt to...

Will firmly hold square or round shanksPlunger operated by knurled sleeveSpring inside sleeve causes plunger to back off when pressure is removedRound shanks can be gripped, but care must be usedGripping surfaces are properly tempered

For holding taps, drills, reamers, and other small tools to be turned by handCentered body, for use on lathe centers or on upright drilling machines to start the tap straightJaws conform to the tool being held, making it rigid and less apt to...

Three position gear box for quick, efficient ratcheting actionDesigned for use with taps, reamers, screw extractors and other tools with a square shank

Will firmly hold square or round shanksPlunger operated by knurled sleeveSpring inside sleeve causes plunger to back off when pressure is removedRound shanks can be gripped, but care must be usedGripping surfaces are properly tempered

Designed for use with taps, reamers, screw extractors and other tools with a square shankAdjusted and tightened to size by twisting knurled nut

Designed for use with taps, reamers, screw extractors and other tools with a square shankAdjusted and tightened to size by twisting knurled nut

Designed for use with taps, reamers, screw extractors and other tools with a square shankAdjusted and tightened to size by twisting knurled nut

For holding taps, drills, reamers, and other small tools to be turned by handCentered body, for use on lathe centers or on upright drilling machines to start the tap straightJaws conform to the tool being held, making it rigid and less apt to...

Three position gear box for quick, efficient ratcheting actionDesigned for use with taps, reamers, screw extractors and other tools with a square shank

For holding taps, drills, reamers, and other small tools to be turned by handCentered body, for use on lathe centers or on upright drilling machines to start the tap straightJaws conform to the tool being held, making it rigid and less apt to...

End of TR-50 wrench has 3/8" square drive to accommodate socket wrench or extension when desiredDesigned for use with taps, reamers, screw extractors and other tools with a square shank

Straight handle design provides greater leverage, especially when using larger diameter tapes

Will firmly hold square or round shanksPlunger operated by knurled sleeveSpring inside sleeve causes plunger to back off when pressure is removedRound shanks can be gripped, but care must be usedGripping surfaces are properly tempered

Will firmly hold square or round shanksPlunger operated by knurled sleeveSpring inside sleeve causes plunger to back off when pressure is removedRound shanks can be gripped, but care must be usedGripping surfaces are properly tempered

Designed for use with taps, reamers, screw extractors and other tools with a square shankAdjusted and tightened to size by twisting knurled nut

Designed for use with taps, reamers, screw extractors and other tools with a square shankAdjusted and tightened to size by twisting knurled nut

Ratchet can be set for right or leftAlso locks for non-ratchet