Puller Parts & Accessories

Proto Slide HammerHole Diameter (in): 5/8

Proto Reversible Adjusting NutThread: 7/8-in -14 UNF

Proto Gear and Bearing Separator Threaded RodThreaded

For bore diameters 3/4" to 2"

Replacement Puller JawDual Reach

Forcing screws are coated with an aerospace dry film lubricant to increase screw life, reduce wear and torque required for screw turningScrew threads must be kept clean at all times

Provides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore

T-Handle RodThread: 5/8-in -12 ACME

11/32-in Length2-in HeightInternal Thread: 5/8-in-12 AcmeExternal Thread: 7/8-in-14 UNF

Provides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore

Provides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore

Provides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore

Adjustable reversible jaw4 1/2 in reach

Proto Rear Axle Flange FootThread: 5/8-in-13

Proto Gear and Bearing Separator Threaded RodThreaded

Proto Blind Bearing AdapterTaper and Collet styles

Proto Cap Screw JawCan be used with 1/2-in cap screws

Proto Slotted CrossarmSlot Depth (in): 2-25/32

Provides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore

These pullers are primarily for the automotive industry where parts such as pulleysTreated steel screw; features a hex head that can be rotated with socket and ratchetIt has a floating tip that exerts the extraction force

Proto Slide HammerHole Diameter (in): 5/8

Proto Jawblock AssemblieIncludes J4056PN Jaw Pivot Pin, J4209JB Jaw Block, J4209LS Lock Jaw, and J4210RJ Reversible Jaw

Proto Blind Bearing ColletTaper and Collet styles

Forcing screws are coated with an aerospace dry film lubricant to increase screw life, reduce wear and torque required for screw turningScrew threads must be kept clean at all times

Threaded Crossarms12-in Thread size

60° TaperFor use with Forcing Screw

Adjustable reversible jaw4 1/2 in reach

Provides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore

60° TaperFor use with Forcing Screw

Provides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore

Provides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore

Provides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore

These pullers are primarily for the automotive industry where parts such as pulleysTreated steel screw; features a hex head that can be rotated with socket and ratchetIt has a floating tip that exerts the extraction force

Proto Standard TipFor use with J4012 Forcing Screw

Provides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore

Provides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore

Forcing screws are coated with an aerospace dry film lubricant to increase screw life, reduce wear and torque required for screw turningScrew threads must be kept clean at all times

Replacement Puller JawDual Reach

Proto Inside Hook JawInternal Thread: 5/8-in -12 ACMEUse with 5/8-in Hole (min.)

Proto Inside JawAvailable in open stock as well in sets: J4290B, J4289B, J4235A, J4235B, J4250, J4251, J4252, J4255