PROTO

Tethered tape measure sleeve with D-ring securely keeps tape measure attachedMade from durable ballistic nylon material to withstand heavy wearDesigned to conveniently hold a wide variety of tape...

Short blade feeler gauge0.0010-inch Blade thicknessSatin Finish

Non-MagneticFor checking the air gap in electronic ignition systems for all weather conditionsBlades etched with both decimal size and metric equivalent

Versatile all-angle ball jointFeatures telescoping handleIncludes pocket clip

Versatile all-angle ball jointFeatures telescoping handleIncludes pocket clip

Blades etched with both decimal size and metric equivalentEach blade has 2 different thicknesses, go and no-go

For use in setting gaps and spark plugs with high energy ignition systemsIncludes blade holder, electrode bender and six bent wire gauges in sizes .044-in, .045-in, .050-in, .054-in, .060-in, ...

Versatile all-angle ball jointFeatures telescoping handleIncludes pocket clip

Blades etched with both decimal size and metric equivalentBlades are offset at a right angle to help protect hands from a hot manifold while setting an overhead value1/2 inch wide bent gauges for...

1/2-in x 3-in metric blades in steel holderSizes: 0.06mm, 0.07mm, 0.08mm, 0.10mm, 0.15mm, 0.20mm, 0.25mm, 0.30mm, 0.35mm, 0.40mm, 0.45mm, 0.50mm, 0.55mm, 0.60mm, 0.70mm

Contains twenty-five short blades in holderShort blades etched with both decimal size and metric equivalentIncludes all blade sizes in between except .019"

Versatile all-angle ball jointFeatures telescoping handleIncludes pocket clip

Blades etched with both decimal size and metric equivalent

Short blades etched with both decimal size and metric equivalent

Includes compression gauge, O-ring, compression gauge and instructional pamphletFlexible hose and quick-disconnect coupler permit fast, easy engagement of threaded fitting into spark plug holeGauge...

The blades in the versatile Proto feeler gauge set are etched with metric sizes1/2 inch x 3-5/16 inch metric blades in steel holder

Spark plug electrode bender and eight bent wire gauges in sizes .020-in, .025-in, .028-in, .030-in, .032-in, .034-in .035-in .040-inGauges marked with both decimal size and metric equivalent

Long blade feeler gauge0.0015-inch Blade thickness0.01-lbs Weight

Blades etched with both decimal size and metric equivalentBlades etched with both decimal size and metric equivalent

Versatile all-angle ball jointFeatures telescoping handleIncludes pocket clip

Short blade feeler gauge0.0010-inch Blade thicknessSatin Finish

Long blade feeler gauge0.0015-inch Blade thickness0.01-lbs Weight

Blades etched with both decimal size and metric equivalent

Blades etched with both decimal size and metric equivalentEasily measures gap widthsDurable, flexible steel construction