Pin Vises

The #92 Swivel-head Pin Vise facilitates precise work on models, instruments and jewelryHardened collet opens to desired size

Help to reclaim precious time that is normally spent switching between tool attachments or searching for drill bits in a crowded tool boxEach end of this Pin Vise features a reversible collet for holding your favorite drill bits, taps and reamers

The #93 Adjustable Pin Vise can hold small drills, deburrers, wires, files, reamers and other small toolsIt's ideal for electronics assembly, toolmaking and model making

For holding small rods, wire, drills, taps and other small toolsTool steel collets at each end are hardened and grip firmly when screw chuck is tightenedNickel plated body is hollow to permit holding of long rods of wire

For holding small rods, wire, drills, taps and other small toolsTool steel collets at each end are hardened and grip firmly when screw chuck is tightenedNickel plated body is hollow to permit holding of long rods of wire

For holding small rods, wire, drills, taps and other small toolsTool steel collets at each end are hardened and grip firmly when screw chuck is tightenedNickel plated body is hollow to permit holding of long rods of wire

For holding small rods, wire, drills, taps and other small toolsTool steel collets at each end are hardened and grip firmly when screw chuck is tightenedNickel plated body is hollow to permit holding of long rods of wire

Jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtainedHandles and binding nuts are nickel-platedHole extends through the full length of the handles so that wires of any length and any diameter up to the full size of...

Jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtainedInsulating PVC handle which is octagon shaped, preventing them from rolling when laid downHole extends through the full length of the handles so that wires of...

Jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtainedHandles and binding nuts are nickel-platedHole extends through the full length of the handles so that wires of any length and any diameter up to the full size of...

Jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtainedInsulating PVC handle which is octagon shaped, preventing them from rolling when laid downHole extends through the full length of the handles so that wires of...

Reversible collets with two size capacities at each endBoth ends of each chuck are beveled, providing "back support"Knurled handle and binding nutOne chuck holds 0" to 0.031" and 0.093" to 0.125" diameter toolsOther chuck holds 0.031" to 0.062" and 0...

Special collet design with tapers at both ends, providing maximum clamping surfaceHave a smaller body diameter than the chuck, which allows fast opening/closing and rapid rotation between the thumb and finger when used on small work

Special collet design with tapers at both ends, providing maximum clamping surfaceHave a smaller body diameter than the chuck, which allows fast opening/closing and rapid rotation between the thumb and finger when used on small work

Special collet design with tapers at both ends, providing maximum clamping surfaceSmaller body diameter than the chuck which allows fast opening and closingSet of all four sizes in a protective case

Special collet design with tapers at both ends, providing maximum clamping surfaceHave a smaller body diameter than the chuck, which allows fast opening/closing and rapid rotation between the thumb and finger when used on small work