Peakworks

Tank Trolley is designed for use on water and fuel storage tanksTank Trolley provides a 5000 lb anchorage as required by OSHA and ANSI standardsTank Trolley simply rides on the top lip of the...

Lightweight and portable, so you can take it with you from job to job, saving you time and moneyThe PeakWorks series aluminum tripod features adjustable/locking legs, so you can find just the right...

Lightweight and portable, so you can take it with you from job to job, saving you time and moneyThe PeakWorks series aluminum tripod features adjustable/locking legs, so you can find just the right...

Lightweight and portable, so you can take it with you from job to job, saving you time and moneyThe PeakWorks series aluminum tripod features adjustable/locking legs, so you can find just the right...

Lightweight and portable, so you can take it with you from job to job, saving you time and moneyThe PeakWorks series aluminum tripod features adjustable/locking legs, so you can find just the right...

Lightweight and portable, so you can take it with you from job to job, saving you time and moneyThe PeakWorks series aluminum tripod features adjustable/locking legs, so you can find just the right...

Lightweight and portable, so you can take it with you from job to job, saving you time and moneyThe PeakWorks series aluminum tripod features adjustable/locking legs, so you can find just the right...

Lightweight and portable, so you can take it with you from job to job, saving you time and moneyThe PeakWorks series aluminum tripod features adjustable/locking legs, so you can find just the right...

Lightweight and portable, so you can take it with you from job to job, saving you time and moneyThe PeakWorks series aluminum tripod features adjustable/locking legs, so you can find just the right...

Slim Line tool lanyard for smaller, lighter toolsDurable for long-lasting useCapacity of 15 lb

The PeakWorks tool tethering system includes two specially designed lanyards that connect the tool anchor clamp to either the operator or to a suitable anchor pointThe wrist lanyard features a built...

The PeakWorks tool tethering system includes two specially designed lanyards that connect the tool anchor clamp to either the operator or to a suitable anchor pointThe wrist lanyard features a built...

The PeakWorks tool tethering system includes two specially designed lanyards that connect the tool anchor clamp to either the operator or to a suitable anchor pointThe wrist lanyard features a built...

Designed to protect the worker when operating near an edge and where a fall hazard exists that could cause the lifeline to come into contact with the edgeProvides additional protection against sharp...

Tie-back is an all-in-one, self-retracting lifeline and anchorage connector, thus reducing the amount of equipment required on the job site and making it a cost-effective alternativeIt allows the...

Manufactured using special 0.1 in (2.5 mm) thick, 1 in (25) mm wide Dyneema Core materialsThe anchor point incorporates a heavy-duty, durable and convenient swivel eyeFeatures a sewn-in indicator on...

Manufactured using special 0.1 in (2.5 mm) thick, 1 in (25) mm wide Dyneema Core materialsThe anchor point incorporates a heavy-duty, durable and convenient swivel eyeFeatures a sewn-in indicator on...

Approved for use in vertical and horizontal applicationsFoot level tie-off: Tested and approved for foot level tie-offAluminum housingDouble-locking steel carbiner with 3,600 lb. gate strength...

Approved for use in vertical and horizontal applicationsFoot level tie-off: Tested and approved for foot level tie-offAluminum housingDouble-locking steel carbiner with 3,600 lb. gate strength...

Approved for use in vertical and horizontal applicationsFoot level tie-off: Tested and approved for foot level tie-offAluminum housingDouble-locking steel carbiner with 3,600 lb. gate strength...

Designed to protect the worker when operating near an edge and where a fall hazard exists that could cause the lifeline to come into contact with the edgeProvides additional protection against sharp...

Designed to protect the worker when operating near an edge and where a fall hazard exists that could cause the lifeline to come into contact with the edgeProvides additional protection against sharp...

Designed to protect the worker when operating near an edge and where a fall hazard exists that could cause the lifeline to come into contact with the edgeProvides additional protection against sharp...

Tie-back is an all-in-one, self-retracting lifeline and anchorage connector, thus reducing the amount of equipment required on the job site and making it a cost-effective alternativeIt allows the...

Designed to protect the worker when operating near an edge and where a fall hazard exists that could cause the lifeline to come into contact with the edgeProvides additional protection against sharp...

Dual units are also available with lightweight aluminum rebar hooksAttachment points include a swivel eye on housing with connection pin for mounting below the dorsal D-ringHi-Viz green Dyneema...

Dual units are also available with lightweight aluminum rebar hooksAttachment points include a swivel eye on housing with connection pin for mounting below the dorsal D-ringHi-Viz green Dyneema...

Manufactured using special 0.1 in (2.5 mm) thick, 1 in (25) mm wide Dyneema Core materialsThe anchor point incorporates a heavy-duty, durable and convenient swivel eyeFeatures a sewn-in indicator on...

Manufactured using special 0.1 in (2.5 mm) thick, 1 in (25) mm wide Dyneema Core materialsThe anchor point incorporates a heavy-duty, durable and convenient swivel eyeFeatures a sewn-in indicator on...

Back splice at the trailing end to prevent the rope grab from coming off the end of the lifelineSpecially designed from rope made using high-strength polysteel

Back splice at the trailing end to prevent the rope grab from coming off the end of the lifelineSpecially designed from rope made using high-strength polysteel

Back splice at the trailing end to prevent the rope grab from coming off the end of the lifelineSpecially designed from rope made using high-strength polysteel

Back splice at the trailing end to prevent the rope grab from coming off the end of the lifelineSpecially designed from rope made using high-strength polysteel

Back splice at the trailing end to prevent the rope grab from coming off the end of the lifelineSpecially designed from rope made using high-strength polysteel

Back splice at the trailing end to prevent the rope grab from coming off the end of the lifelineSpecially designed from rope made using high-strength polysteel

Back splice at the trailing end to prevent the rope grab from coming off the end of the lifelineSpecially designed from rope made using high-strength polysteel

Back splice at the trailing end to prevent the rope grab from coming off the end of the lifelineSpecially designed from rope made using high-strength polysteel

Back splice at the trailing end to prevent the rope grab from coming off the end of the lifelineSpecially designed from rope made using high-strength polysteel

Back splice at the trailing end to prevent the rope grab from coming off the end of the lifelineSpecially designed from rope made using high-strength polysteel

Back splice at the trailing end to prevent the rope grab from coming off the end of the lifelineSpecially designed from rope made using high-strength polysteel