Curv-O-Mark Centering Head, DSL, 1/2 in to 4 in Pipe Capacity, #6 Standard (1 EA / EA)
Images may not be exact. Please refer to Part # and Description.
Need Some Help?
Get real service from real
people, that know the products!
Curv-O-Mark Centering Head, DSL, 1/2 in to 4 in Pipe Capacity, #6 Standard (1 EA / EA) Specifications
-
Head Type:Y-Type
-
Head Width [Nom]:4 in
-
Pipe Cap. [Max]:4 in
-
Pipe Cap. [Min]:1/2 in
-
Type:#6 Standard Centering Head; DSL
Help us improve our product information
Description
Aids in setting of center lines, establishing angles and marks for butt-ins, location points inside pipes and tanks, laying out keyways, and measuring declivity
The Y-type head is fitted with an adjustable dial bubble protractor (DSL)
Use a tapping hammer to operate the hardened centering pin
The Y-type head is fitted with an adjustable dial bubble protractor (DSL)
Use a tapping hammer to operate the hardened centering pin
Related Products
CURV-O-MARK
Curv-O-Mark Replacement Pin for Centering Head, #6 Standard (1 EA / EA)
$23.46
Hardened steel replacement pin for use with Contour centering headSuitable for marking but not to be used as a center punch
430-14798
CURV-O-MARK
Curv-O-Mark Centering Head, DSL, 1 in and Larger Pip Capacity, #7 Jumbo (1 EA / EA)
$168.22
Aids in setting of center lines, establishing angles and marks for butt-ins, location points inside pipes and tanks, laying out keyways, and measuring declivityThe Y-type head is fitted with an...
430-14776
CURV-O-MARK
Curv-O-Mark Contour Marker, 1-1/2 in to 18 in Pipe Capacity (1 EA / EA)
$201.92
X-shape frame, calibrated protractor, and a triple joint marking arm and holderLaterals at any angle, tees, wyes, crosses elbowsFrame easily folds to fit in pocketCompact
430-14771
CURV-O-MARK
Curv-O-Mark Contour Markers, 8 in - 48 in Pipe Capacity (1 EA / EA)
$465.01
X-shape frame, calibrated protractor, and a triple joint marking arm and holderLaterals at any angle, tees, wyes, crosses elbowsFrame easily folds to fit in pocketCompact
430-14773
CURV-O-MARK
Curv-O-Mark Radius Marker, Standard, 24 in Radius (1 EA / EA)
$52.68
Precision tools made of rust proof aluminum and anodized for lasting protectionThe arms are precisely aligned with spring tension joints to guarantee accuracy and rigidityThe holder accommodates flat...
430-14782
CURV-O-MARK
Curv-O-Mark Pipe Flange Aligners, 12 in Diam, Slotted (1 EA / EA)
$143.38
Features slotted pins with "friction fitting" knurled nuts for flanges to 30" - 150 lbsAll models of the Pipe aligner will two-hole (make 2 holes of the flange horizontally level with the ground) and...
430-14779
CURV-O-MARK
Curv-O-Mark Replacement Dial & Level (1 EA / EA)
$45.20
Replacement dial set level for Centering Head No. 2UPX5 (sold separately).Adjustable bubble protractor that covers 180 degrees through two 90 degree quadrants, reading in 2.5 degree increments.Used...
430-14797
Flange Wizard
Flange Wizard Magnetic Centering Head with Vial, 1 in and Larger Pipe Capacity, Small (1 EA / EA)
$69.17
One piece Y-shaped body design with magnetic legsBuilt-in dial with 2-1/2° increments that turns 360°Hardened center punch marks set position by taping with a hammerUsed to establish and mark a...
496-53025-M
CURV-O-MARK
Curv-O-Mark Flange Aligner Bases, Aluminum (1 EA / EA)
$149.73
The Curv-O-Mark Aligner Base is notched at either end for ease in aligning on the centerline of the pipeHas two 25-pound pull, cast-in magnets for holder in either a flat horizontal or vertical...
430-14795