Handsaws

Over-molded rubberized grip for a comfortable and secure grip while workingAluminum locking mechanism prevents blade from being removed during useIdeal for flush cutting applications or when a hacksaw is not availableDie cast aluminum construction

Blade mounts easily on the bottom of handle for flush cutting applicationsComfortable grip rubberized handles allow for confident handling even in cold, hot, wet or dirty environmentsCuts plastic pipe easilyTeeth cut on the pull stroke and not on the...

Blade mounts easily on the bottom of handle for flush cutting applicationsComfortable grip rubberized handles allow for confident handling even in cold, hot, wet or dirty environmentsCuts plastic pipe easilyTeeth cut on the pull stroke and not on the...

Saw will tension up to 30,000 PSIMount blade at 45 for flush cutting applicationsFront handle grip reduces fatigue in continuous cutting applications

Hardened, beveled blade point for scoring and plunge cutsTriple teeth for a fast cutBlade cuts in both directions (push and pull)Non-slip comfort grip with thumb grooveFlat-end grip for palming or punching through drywall

Designed to deliver smooth, sharp cutsIt features triple ground jet cut teethTri-material handle for comfort and durabilityNew handle design improves ease of cutBladeArmor coating helps reduce friction while cutting

Flexible blade creates perfect flush cutsDouble-sided blade for making inside cuts from the left or right23-point tooth geometry cuts quickly and cleanly on the pull stroke

Aggressive tooth design cuts up to 50% faster than traditional tooth designsMultiple material usage for use on drywall, plastic and other building materials

45â or 90â blade angle used for standard and flush cutsLow profile for cutting in tight spacesHacksaw front handle becomes a pistol grip jab saw

Three-sided tooth cuts up to 50% faster than traditional hand sawsToughCoat long-lasting, low-friction coating for less dragInduction-hardened teeth stay sharp for long life

Robust metal frame with ergonomic rubber grip handleFeatures large, easy-to-adjust tension knobAllows flexibility for flush cutting at 90‚° or 180‚° blade angles

Two saws in one!Hacksaw for metal and plastic, a bowsaw for wood and general yard workBuilt-in hand safety guard helps prevent injuriesHacksaw blade: Long-lasting high-speed steelIncludes safety blade guard for storage

Used for cutting sharp angles and curvesSpring steel, rounded edge frame with polished finishAdjustable angle blade

A favorite in citrus groves and vineyardsSilver Steel constructed blade with polished finishEasy-to-grip knife-type wood handle trimmed with aluminum screwsFull cardboard sleeve protects the blade

Ergonomic handle with non-slip gripHardened steel blade with clog-free teeth, pointed tip easily punches through drywallBlade cuts on both on push and pull strokes

Over-molded rugged design for heavy-duty use and comfortFully-adjustable blade tension up to 30,000 psi for longer blade life and faster, accurate cutsAlternative 45 degree blade mounting allows for flush cuttingHandy blade storage in tubular frame

Non-SparkingNon-MagneticCorrosion resistantBeryllium-free

Unique I-Beam construction allows blade to tension up to 50,000 psi, resulting in fast, straight cutsRubberized handles allow for confident handling even in wet or cold environmentsAccepts any Lenox reciprocating saw blade to be used as a jab saw

Heavy-dutyPreferred by utility crews and tree surgeonsSilver Steel constructed blade, flat groundConcave cutting edge has precision set and bevel filed teeth that cut fast on the pull strokeExtra large teeth and gullets for speed cutting large limbs

Hardened, beveled blade point for scoring and plunge cutsTriple teeth for a fast cutBlade cuts in both directions (push and pull)Non-slip comfort grip with thumb grooveFlat-end grip for palming or punching through drywall

Tensioning Handle provides extra torque for straighter cuts and longer blade lifeMultiple Pin Locations for mounting blade at 90° or 45° for standard or flush-cut applicationsLocking Screw Design allows for storage of extra blades and secures blade...

Ergonomically designed curved handle is cushioned for comfort and prolonged useAccepts standard reciprocating blade or hacksaw bladeIdeal for close quarter sawingLarge tension nut makes securing the blade quick and easy

Cuts wood, nails, metal lath, composition board, BX cable, conduit, and more4-way blade positioningPistol gripFor cutting curves, circles, and frets into places where an ordinary hacksaw cannot reach

3-sided tooth design cuts wood 50% faster than conventional sawsInduction hardened teeth stay sharp longerCuts plastic tubing

Hardened and tempered high carbon steel blade Walnut-stained handle

Ergonomic grip with thumb rest for maximum comfortBlade top in handle to eliminate cutting hazard to handStructural design utilizing high impact polymer coating for maximum strength and durability45% increase over standard mini hacksaws in cutting depth...

12 point induction hardened teeth stay sharp 3 to 5 times longer than standard teethAggressive 3-sided tooth design cuts wood 50% faster than conventional handsawsIdeal for access in tight spaces and cutting a variety of materials such as plastic, pipe,...

SharpTooth technology uses three cutting surfaces to cut faster than conventional Stanley hand sawsInduction-hardened teeth stay sharp longer than standard teeth45â and 90â blade markings for quick and easy measurements

Locking screw design allows for storage of extra blades and secures blade for "jab" sawing and multiple pin locations for mounting blade at 90â or 45â for standard or flush-cut applicationsTensioning handle provides extra torque to keep blades rigid for...

Hardened and tempered high carbon steel blade Walnut-stained handle

Sharptooth technology cuts 50% faster than traditional designCuts on both push and pull strokes

Cast aluminum handle is lightweight, comfortable and durableHandle covers blade to protect end user's handHigh-performance blade included (15-628): 1

15% thicker blade for straighter cuts to reduce binding

Primary use - Cross cutting and rippingFlexible blade for flush cutProTouch GripUser example - Exterior trim carpenter/cutting the overhang of gable soffit

Hardened and tempered high carbon steel bladeWalnut-stained handle

Stained handleSharp tip for plunge cutsBlade is epoxy-bonded and ferruled to handleFor making cutouts for electrical outlets in gypsum wallboard, sheetrock and plastic materials

Blade tensioning deviceSturdy

Jab Saw locks in two cutting positions and folds into handle for safe storageJab saw works with any reciprocating saw blade for easy cutting of different materialsOther end includes lock-back utility knife that folds into handle for safe storage

High-strength bow design resists twistingAccepts 12" blade either at 45â or 90â cut anglesComfort grips fore and aft for better control and powerAccepts 12 in blade either at 45 or 90 cut angles

Folds like a jack knifeAccepts standard sabre and reciprocating bladesBlade storage in handle