Half Round Files

Used on concave, convex and flat surfacesFile is rounded on one side, flat on oppositeFlat and round sides are double-cut

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeBacks of all half-round bastard files are double-cutBacks of all 4 and 6" files are single-cutBacks of all half-round second-cut files are longer than 6" are double-cut

Used on concave, convex and flat surfacesFile is rounded on one side, flat on oppositeFlat and round sides are double-cut

Used by tool and die makers, jewelers, model makers, and home craftsmanDouble-cut on both flat and half-round sidesMade in much finer cuts, which vary from No. 00 (coarsest) to No. 4 (finest)

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut

Used by tool and die makers, jewelers, model makers, and home craftsmanDouble-cut on both flat and half-round sidesMade in much finer cuts, which vary from No. 00 (coarsest) to No. 4 (finest)

Used by tool and die makers, jewelers, model makers, and home craftsmanDouble-cut on both flat and half-round sidesMade in much finer cuts, which vary from No. 00 (coarsest) to No. 4 (finest)

American pattern half round file, bastard cutUsed on concave, convex and flat surfacesRounded on one side, flat on opposite

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut

Used by tool and die makers, jewelers, model makers, and home craftsmanDouble-cut on both flat and half-round sidesMade in much finer cuts, which vary from No. 00 (coarsest) to No. 4 (finest)

Used by tool and die makers, jewelers, model makers, and home craftsmanDouble-cut on both flat and half-round sidesMade in much finer cuts, which vary from No. 00 (coarsest) to No. 4 (finest)

Used by tool and die makers, jewelers, model makers, and home craftsmanDouble-cut on both flat and half-round sidesMade in much finer cuts, which vary from No. 00 (coarsest) to No. 4 (finest)

Used by tool and die makers, jewelers, model makers, and home craftsmanDouble-cut on both flat and half-round sidesMade in much finer cuts, which vary from No. 00 (coarsest) to No. 4 (finest)

Designed for filing pipeline welds and root passes, and for scale removal from pipelineIdeal for rapid metal removal in rough filing applications

Designed for filing pipeline welds and root passes, and for scale removal from pipelineIdeal for rapid metal removal in rough filing applications

Designed for filing pipeline welds and root passes, and for scale removal from pipelineIdeal for rapid metal removal in rough filing applications

Designed for use on stainless steels and exotic alloysOffer excellent wear resistance and long service life

Designed for filing pipeline welds and root passes, and for scale removal from pipelineIdeal for rapid metal removal in rough filing applications

Used on concave, convex and flat surfacesFile is rounded on one side, flat on oppositeFlat and round sides are double-cut

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut

Used by tool and die makers, jewelers, model makers, and home craftsmanDouble-cut on both flat and half-round sidesMade in much finer cuts, which vary from No. 00 (coarsest) to No. 4 (finest)

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut

Designed for use on stainless steels and exotic alloysOffer excellent wear resistance and long service life

Designed for filing pipeline welds and root passes, and for scale removal from pipelineIdeal for rapid metal removal in rough filing applications

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut

Designed for filing pipeline welds and root passes, and for scale removal from pipelineIdeal for rapid metal removal in rough filing applications

Designed for filing pipeline welds and root passes, and for scale removal from pipelineIdeal for rapid metal removal in rough filing applications

Designed for filing pipeline welds and root passes, and for scale removal from pipelineIdeal for rapid metal removal in rough filing applications

Designed for filing pipeline welds and root passes, and for scale removal from pipelineIdeal for rapid metal removal in rough filing applications

Designed for filing pipeline welds and root passes, and for scale removal from pipelineIdeal for rapid metal removal in rough filing applications

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeBacks of all half-round bastard files are double-cutBacks of all 4 and 6" files are single-cutBacks of all half-round second-cut files are longer than 6" are double-cut

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut

Used on concave, convex and flat surfacesRounded on one side, flat on oppositeFlat sides of all half-round files are double cutBacks of all 4 in and 6 in files are single-cutBacks of all half-round second-cut files are longer than 6 in are double-cut