Depth & Height Gages

Large, easy to read LCD numbersAbsolute and relative measurementsDisplay can be inverted for easy readingHold function for freeze measurement

Double-column structure ensures high measuring accuracyCoarse/fine feed switchingSwitchable resolution and two preset reference height

Base and measuring faces are hardened and micro-lappedOptional wider extension base availableSPC data output

Fine-adjustment carriage to feed the slider finelyCarbide-tipped scriber is providedBuilt in ABSOLUTE linear encoder

Lock to hold the slide in positionZero at any positionFine adjustment thumb roll

The gage consists of a nicely finished, hardened steel head and an accurate, machine divided, tempered steel ruleGage can be smoothly adjusted to the required measurement and then locked into position by a knurled nutBase is cut out on one side, adjacent...

Knife-edge base and a needle point contact which has been hardened and groundThe knife-edge base has a cutout so that the conical point can be precisely positioned for close workPoint is 1/2" (12.7 mm) long with a 40‚° included angle

Rounded nose scriber cuts clean, sharp linesZero at any positionManual ON/OFF w/auto OFF after 5 min. of non-useScriber can reference zero from the base bottomSlide lock & fine adjustment thumb roll

Optio l accessory for Heightmatic High-Precision Height Gage

Hardened with lapped edges and notchesMeets requirements of the American tio l US 60 degree StandardsScales with 14ths and 20ths graduations provided on one side, 24ths and 32nds on reverse side

Made of hardened stainless steelBase and measuring faces are hardened and micro-lappedOptional wider extension bases are available

Easier and faster reading of dialMade of hardened stainless steelBase and measuring faces are hardened and micro-lapped