Adhesives & Glues

Can be machined to close tolerancesHardens in about an hourIdeal leveling compound for machinery and equipmentLow viscosity and high comprehensive strengthWhen cast over models, steel-filled liquid epoxy provides accurate detail reproduction in the...

High-density, micro-alumina ceramic bead-filled epoxy system for protecting equipment that handles particulate smaller than 1/8"Excellent for dust particulate applications including slurry pumps, scrubbers, screens, and screw conveyorsCan be troweled to...

When applied in a 15-20 mil coating, this low-viscosity, alumina-filled, brushable epoxy compound provides a smooth, protective barrier against wear, abrasion, corrosion, erosion, and chemical attackLow-friction surface reduces turbulence, wear, and...

Ceramic fibers give this trowelable putty excellent wear and abrasion resistant propertiesCures to smooth, low friction surfaceFor surfaces exposed to wear, erosion, and cavitationNon-rusting

Ideal for renewing or protecting surfaces subject to corrosion, abrasion, and harsh environmentsFerro-silicone-filled epoxy has outstanding compressive strength, chemical resistanceNon-rusting

Will not sag or shrinkRebuilds worn parts fast-limits downtimeHigh steel content-cures to a metal-like finishSuperior adhesion-bonds well to all metal substrates

TrowelableFor repairing and resurfacing cracks in concrete floorsBonds to old and new concrete and provides greater strength and chemical resistance

Ultra-fast setting, two-step acrylicNo mixing requiredLow viscosity

Ideally suited for applications repairing worn parts, such as shafts, housings, keyways, and flanges, as well as broken or damaged parts, such as castings, pipes, or fabricationsHardens in ten minutesNon saggingSteel filled system, cures to metal-like...

Two-part, pourable epoxy system heavily reinforced with aluminum powderFor casting and repairing of aluminum parts, and for making molds and fixtures

TrowelableFor repairing and resurfacing cracks in concrete floorsBonds to old and new concrete and provides greater strength and chemical resistance

Pourable and self-levelingEpoxy is recommended for casting into hard-to-reach areas, anchoring and leveling, and forming molds and fixtures

Pourable and self-levelingEpoxy is recommended for casting into hard-to-reach areas, anchoring and leveling, and forming molds and fixtures

Will not sag or shrinkRebuilds worn parts fast-limits downtimeHigh steel content-cures to a metal-like finishSuperior adhesion-bonds well to all metal substrates

Aluminum filled epoxy rebuilds and repairs aluminum equipment, forming a non-rusting finish

Aggregate-filled, epoxy system for pours up to 6" deep, including self-leveling applications under rails and sole platesHigh strength material bonds to steel, concrete, and itselfWithstands high torque loading

Repair holes, gouges and tears in SBR conveyor beltCoats hinged or solid plate fastener systems to protect them from damageRebuild worn rubber top ply of SBR belts protecting surface from abrasion and impact from aggregate

Repair holes, gouges and tears in SBR conveyor beltCoats hinged or solid plate fastener systems to protect them from damageRebuild worn rubber top ply of SBR belts protecting surface from abrasion and impact from aggregate

Medium-viscosity urethane fills voids completelyFaithfully reproduces mold detail, and cures to semi-rigid rubberMixes and pours easilyTen-hour demolding time

Requires only a five hour demolding timeLow-viscosity urethane cures to rigid rubberHarder material than Flexane 80 LiquidFor applications requiring a shorter demolding time (5 Hours)

Requires only a five hour demolding timeLow-viscosity urethane cures to rigid rubberHarder material than Flexane 80 LiquidFor applications requiring a shorter demolding time (5 Hours)

Bonds to steel, iron, aluminum, ceramic, concrete, brass, and some plasticsContains wear-resistant fillers for low friction applicationsAlso available in liquid form

Bonds to steel, iron, aluminum, ceramic, concrete, brass, and some plasticsContains wear-resistant fillers for low friction applicationsAlso available in liquid form

Aluminum-filled pourable epoxy for making molds, patterns, and holding fixturesCan be machined, drilled, or tappedLow viscosity provides accurate reproduction of mold details and of delicate or intricate partsQualifies under MMM-A-175475-minute working...

Aluminum-filled pourable epoxy for making molds, patterns, and holding fixturesCan be machined, drilled, or tappedLow viscosity provides accurate reproduction of mold details and of delicate or intricate partsQualifies under MMM-A-175475-minute working...