Klein Tools

Use straight-out or at a right angle for extra leverageHandy sets fit your pocket or tool box easily and help eliminate the lost key problemTough, heat-treated alloy steelHex key ends are square-cut...

The Klein 65821 5-Inch extension is designed with a 1/2-Inch socket sizeThis extension is very desirable for hard to reach areas

Long, narrow nose and slim hinge for extremely close quarter workFinely knurled jaws grip thin wire without damaging itSpring-loaded for self-opening actionCurved handles provide greater tool control

The Klein Tools 20-Piece 3/8-Inch Drive Socket Wrench Set features knurled handles for a better grip and a fluent ratcheting switch for an easy change from tightening to looseningIncludes (4) 6-Point...

Secure tongue and groove design for non-slip grip ¢¢¬¢‚¬Å“ even with heavy pressureWide range of versatile jaw positions

Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheetIntegrated flange prevents the operator from drilling beyond the sheet metalSplit point pilot drill bit prevents...

Polypropylene rope handle, reinforced with leather at splice around top ringNo 6 canvas with Cycolac top ring and molded bottom75-pound (34 kg) Max Load Rating

Unique locking featureMarked slots for each key

Handle resists slippageHandle resists oil, gas, and waterShank rotates in handle to save timeCrank-action handleHeat-treated and tempered shank

For use when light, compact grip is desired and where conductor damage is not a factorSwing latch to help hold cable in the jawGripping pressure of the knurled jaw is applied to 1/4 inch (635 mm)...

Designed for tools with hang holesRiveted to assure long lifeLoop with snap hook for carrying an adjustable wrench, welder¢¢¬¢ž¢s igniter or other tool with hang holeLeather construction

Drop-forgedHigh-leverageExtra-heavy-duty head area gives maximum strength and durabilityHandle features an extra-deep offsetAllows use on a range of bolt-hole sizes without binding

Slim head design for working in confined areas Hot-riveted joint ensures smooth action and no handle wobble Knurled jaws for sure wrapping and looping Curved handles provide greater tool control

75' of 5/16" 3-strand highly-visible orange ropeSpliced to eye of No. 470 snap hook

Lightweight, slim-nose pliers for delicate, precision assembly workKnurled jaws for sure wrapping and looping of wireCurved handles provide greater tool controlSpring-loaded for self-opening action

Internal flanges provide solid, twist-resistant shaft anchorTip-Ident quickly identifies nut driver and sizeFull hollow shafts facilitate work on stacked circuit boards or other long bolt applications

Large eyelet opening in the handle to accommodate a wide variety of hooks on hoists, winches and tackle blocks

Polypropylene rope handle, reinforced with leather at splice around top ringNo 6 canvas with Cycolac top ring and molded bottom75-pound (34 kg) Max Load Rating

Handle resists slippageHandle resists oil, gas, and waterShank rotates in handle to save timeCrank-action handleHeat-treated and tempered shank

Induction-hardened cutting knives for long lifeHot-riveted joint ensures smooth action and no handle wobblePlastic-dipped handles for comfort and ease of identification

Cuts rubber, cables, light metal, wire metal screens, cordage, plastics and ropeBroad, short jaws provide powerful cutting actionExtended handle provides comfort and cutting leverage

Tough plastic handle won't crack or chipScrewdriver blade locks openStandard spearpoint blade.

Handle resists slippageHeat-treated and tempered shankDeep ribbed designHard pointHandle resists oil, gas, and water

Ideal for heavy-duty line workBlade locks openExtra-large curved sheepfoot slitting-blade is 2 5/8 in (67mm) longWoodgrain plastic handle

Torx tip drive cuts slippage, saves fasteners, transmits more torque to the workHandle ends are color-coded for Torx size identificationHandle resists oil, gas, water, and slippageHeat-treated and...

Curved handle with big bolsterBlade locks openBrass liningBrass bolster and ebony wood handle

T-handle hex key design delivers maximum powerBlade-through-handle design for high torque applications

Standard-bevel cutting knives2-layer insulation tested to 1000-voltsPrecision machined, mating surfaces and design dimensions, to extremely close tolerancesDrop forged, hardened, and tempered...

Heat-treated and tempered shankHandle resists slippageHandle resists oil, gas, and water

Made of heavy-duty No. 8 natural canvasBottom and 8 inches (203 mm) of lower sides are covered with moisture-resistant vinylNon-scratch studs on base protect against wearSteel-frame mouth with hinge...

Tapered so parts stay in centerSnap for hanging2-pockets for small partsNo.10 canvas

Curved sheepfoot slitting bladeIdeal for heavy-duty line workBlade locks open

Slip-resistant grip and comfort

Fine harness leatherSeams are lock stitched with nylon threadRetaining straps pass all around the backPadded shoulder strap and hand strap3-ply bottom protected with steel studs

Slim head design for working in confined areasHot-riveted joint ensures smooth action and no handle wobbleKnurled jaws for sure wrapping and loopingCurved handles provide greater tool control

Corrosion resistantSmooth finishSame size opening at each endOffset angle provides clearance over obstructions

T-handle hex key design delivers maximum powerBlade-through-handle design for high torque applications

Hex head drives nut and socket screwsInternal flanges provide solid, twist-resistant shaft anchorPatented Tip-Ident quickly identifies nut driver and size

Galvanized steel and aluminum alloySheaves have bronze bushingsWithout rope or hook

Hot-riveted joint ensures smooth action and no handle wobbleInduction hardened cutting knives for long lifeStreamlined design with sure-gripping, cross-hatched knurled jawsUnique handle tempering...